TiteBike Motorcycle License Plate Mount Kit

Installation Instructions

Please note: The TiteBike license plate relocation kit is for off-road use only. TiteBike makes no claims that this bracket is street legal anywhere on the face of the planet. We recommend that that you check your local and state traffic laws regarding the legality of using this bracket on the public street. The TiteBike license plate relocation kit MUST be installed by a qualified motorcycle mechanic.

The TiteBike universal, multi-position license plate bracket

This motorcycle license bracket is designed to be mounted on the left side of the motorcycle. It can either be mounted in a vertical position or a horizontal position. In each position there are several holes machined so the bracket may be adjusted as needed.

The picture at the top left shows the license plate mount in the horizontal position with the three (3) machined, countersunk holes shown on the left side of the bracket. These holes allow for the bracket to be mounted in one of two positions to the TiteBike motorcycle swingarm bracket.

The picture at the bottom left shows the license plate mount in the vertical position with the six (6) machined, countersunk holes shown on the left side of the bracket. These holes allow for the bracket to be mounted in one of five (5) positions to the TiteBike motorcycle swingarm bracket. In this position the bracket is flipped over. Notice that the holes are counter sunk on opposite sides of the bracket.

The TiteBike motorcycle license plate bracket is designed to work with any of the TiteBike motorcycle swingarm brackets.

Picture of License Plate Bracket for Suzuki SV 650 or Suzuki SV 1000 motorcycle swingarm

License place relocation kit mounted on a SV 650 swingarm

License place relocation kit mounted on a SV 650

The TiteBike swingarm license plate bracket - Suzuki SV 650 and Suzuki SV 1000 models

	This bracket is designed for the Suzuki SV 650 and Suzuki 1000 models. The bracket mounts on the left side of the swingarm.
	Remove the stock screw that holds the back of the Suzuki SV chain guard onto the swingarm.
	Slide the top of the bracket under the Suzuki SV chain guard.
	Apply a small amount of thread locking adhesive to the stock chain guard screw and replace the stock chain guard screw and tighten.
	Apply a small amount of thread locking adhesive to the supplied swingarm spool bolt and tighten the lower portion of the bracket to the swingarm spool mounting hole.
	If there is a swingarm spool mounted on your bike you will have to mount this bracket underneath the spool and you may need to purchase a longer bolt to do so.
	Mount the TiteBike universal license plate mount onto the swingarm bracket either vertically or horizontally using the enclosed recessed bolts and the nylon lock nuts.
	Mount your license plate.

	Suzuki SV 650/1000 Parts List:
(1)	TiteBike universal license plate bracket
(1)	Suzuki SV 650/SV 1000 swingarm bracket
(1)	Suzuki SV swingarm spool bolt
(2)	Mounting bolts
(2)	Lock nuts

The TiteBike Motorcycle License Plate Mount Kit Lifetime Warranty

If the TiteBike Motorcycle License Plate Mount kit ever fails due to a manufacturer's defect. TiteBike will replace the failed component free of charge. The failed bracket must be returned to TiteBike for inspection. Shipping to TiteBike must be paid for by the customer. TiteBike will pay for shipping the replacement part to the customer.

The TiteBike Motorcycle License Plate Mount Kit is 100% designed and manufactured in the United States.

TiteBike Motorcycle License Plate Mount Kit - Patent Pending