HONDA

KAWASAKI

 KAWASAKI REAR LED FENDER ELIMINATORS

KAWASAKI 636-600-Z1000

STEP1 REMOVE THE REAR TAIL SECTION LIKE SHOWN IN THE PICTURE

STEP 2 REMOVE THE REAR PLASTIC FENDER LIKE SHOWN IN THE PICTURE

STEP 3 CUT THE FACTORY WIRES A LITTLE LONG LIKE SHOWN

STEP 4 BOLT THE FENDER ELIMINATOR TO THE TAIL LIKE SHOWN

STEP 5 USE THE REMAINING HARDWARE TO BOLT THE TAIL UP

STEP 6 WIRE THE LEDS INTO THE FACTORY WIRING

THE GREEN WIRES ARE POSITIVE

THE BLACK WIRES ARE NEGATIVE

THE RED WIRE IS THE TAG LIGHT POSITIVE

THIS IS WHAT YOUR LED FENDER ELIMINATOR SHOULD LOOK LIKE

KAWASAKI ZX-10 REAR INSTRUCTIONS

STEP 1 LOOSEN THE BOLTS IN THE TRUNK TO REMOVE THE PLASTIC FENDER

STEP 2 CUT THE FACTORY WIRES A LITTLE LONG

STEP 3 REMOVE THE PLASTIC FENDER LIKE SHOWN IN THE PICTURE

STEP 4 CONNECT THE LED WIRES TO THE FACTORY WIRING

GREEN IS USED FOR THE TURN POSITIVE

BLACK IS USED FOR THE GROUND FOR ALL THE LIGHTS

THE RED WIRE IS USED FOR THE TAG POSITIVE

STEP 5  BOLT THE FENDER ELIMINATOR TO THE TAIL LIKE SHOWN

THIS IS WHAT YOUR FENDER ELIMINATOR SHOULD LOOK LIKE

KAWASAKI   ZX-9

STEP 1 CUT THE PLASTIC FENDER TO THE BOTTOM OF YOUR TRUNK LIKE SHOWN IN THE PICTURE

STEP 2 CUT THE FACTORY TURN SIGNAL WIRE A KITTLE LONG SO IT MAKES IT EASY TO RECONNECT TO THE LEDS

STEP3 ASSEMBLE THE KIT WITH THE LEDS CONNECT THE WIRES TO THE LEDS

STEP 4 BOLT THE FENDER ELIMINATOR TO THE BOTTOM  OF YOUR TRUNK LIKE SHOWN ON THE PICTURE

THIS IS WHAT YOUR LED FENDER ELIMINATOR SHOULD LOOK LIKE

**PATENTS PENDING**

Copyright Notice
The images and other content contained in this web site are the property of and copyrighted by Fenderliminator Inc., unless otherwise indicated.  Permission is granted for the download of images for an individual's personal use, as long as that use is not commercial.  Copyright © 2004 Fenderliminators inc.  All rights reserved

How Does Copyright Protection Work?
Read this excellent overview of international copyright law by www.WhatisCopyright.org.

Email questions to: Service10@1Tail.com   To place your order by phone: 303 872 0329

Phone hours: Monday through Friday: 10:00 am to 5:00 pm (MST) Para toda la gente que habla Español: Llámenos o mándenos un email. Se habla Español.