YAMAHA

EURO FRONT LED TURN SIGNAL INSTALLATION

FOR YAMAHA R6

STEP 1. DRILL A HOLE FOR THE CLUSTER TO FIT LIKE THIS

STEP 2.CLEAN ALL THE PLASTIC SHAVINGS OUT OF THE HOLE AND AROUND IT

STEP 3. FIND THE FACTORY TURN SIGNAL WIRING LIKE SHOWN

STEP 4.PLACE THE CLUSTER IN THE HOLE THAT YOU DRILLED THEN GLUE IT IN PLACE

STEP 5.CONNECT THE CLUSTER WIRES TO THE FACTORY TURN SIGNAL WIRES

THIS IS WHAT THE  LED TURN SIGNAL SHOULD LOOK LIKE

YAMAHA 2004 R1

STEP 1. REMOVE THE COVERS TO THE EURO TURN SIGNAL

STEP 2.PULL OUT THE RUNNING LIGHT

STEP 3.CUT BOTH WIRES THAT ARE BLACK

STEP 4 CONNECT THE BLACK AND RED WIRE TO THE BLACK WIRES

CONNECT THE RED WIRE TO THE BROWN OR GREEN DEPENDING THE

SIDE YOU ARE ON THEN CONNECT THE BLACK TO THE BLACK

THIS IS WHAT YOUR EURO SHOULD LOOK LIKE

**PATENTS PENDING**

Copyright Notice
The images and other content contained in this web site are the property of and copyrighted by Fenderliminator Inc., unless otherwise indicated.  Permission is granted for the download of images for an individual's personal use, as long as that use is not commercial.  Copyright © 2004 Fenderliminators inc.  All rights reserved

How Does Copyright Protection Work?
Read this excellent overview of international copyright law by www.WhatisCopyright.org.

Email questions to: Service10@1Tail.com   To place your order by phone: 303 872 0329

Phone hours: Monday through Friday: 10:00 am to 5:00 pm (MST) Para toda la gente que habla Español: Llámenos o mándenos un email. Se habla Español.