YAMAHA RACE KITS

2004 R1 RACE KIT

STEP 1 REMOVE THE PLASTIC FENDER REMOVE THE 4 ALLEN HEAD SCREWS

STEP 2 CUT THE FACTORY WIRING AS LONG AS YOU CAN

STEP 3 REMOVE THE TAIL SECTION OF THE BIKE AND THE BREAK LIGHT TO

STEP 4 YOU WILL HAVE TO DRILL THREE HOLES ON BOTH SIDES AS SHOWN IN THE PICTURES

STEP 5 MOUNT THE LED AND CONNECT THE FACTORY WIRING AS SHOWN IN THE PICTURE

STEP 6 REMOVE THE SEAT AND MOVE THE FUSE PANEL AND THE PLASTIC RIVETS

STEP 7 MOUNT THE FENDER ELIMINATOR KIT AND CONNECT

 THE FACTORY WIRING TO THE TAG LIGHT LED AS SHOWN IN THE PICTURE

THIS IS WHAT YOUR RACE KIT SHOULD LOOK LIKE

YAMAHA R6 RACE KIT

STEP 1 REMOVE THE PLASTIC FENDER AND THE TAIL SECTION OF THE BIKE

STEP 2 CUT THE FACTORY WIRING AS LONG AS YOU CAN

STEP 3 MOUNT THE TURN SIGNAL LEDS UNDER THE TAIL LIGHT AS SHOWN IN THE PICTURE

STEP 4 TUCK THE EXTRA WIRE BEHIND THE TAIL LIGHT AS SHOWN IN THE PICTURE

STEP 5 YOU WILL HAVE TO DRILL 3 HOLES IN THE BOTTOM OF THE TAIL AS SHOWN IN THE PICTURE

STEP 6 MOUNT THE FENDER ELIMINATOR TO THE BOTTOM OF THE TAIL SECTION

STEP 7 CONNECT THE FACTORY WIRING TO THE TAG LED

THIS IS WHAT YOUR RACE KIT SHOULD LOOK LIKE

**PATENTS PENDING**

Copyright Notice
The images and other content contained in this web site are the property of and copyrighted by Fenderliminator Inc., unless otherwise indicated.  Permission is granted for the download of images for an individual's personal use, as long as that use is not commercial.  Copyright © 2004 Fenderliminators inc.  All rights reserved

How Does Copyright Protection Work?
Read this excellent overview of international copyright law by www.WhatisCopyright.org.

Email questions to: Service10@1Tail.com   To place your order by phone: 303 872 0329

Phone hours: Monday through Friday: 10:00 am to 5:00 pm (MST) Para toda la gente que habla español: Llámenos o mándenos un email. Se habla español.