 |
|
 |
|
 |
|
 |
| -TiteBike- (tm) License Plate Relocation Kit in Chrome: Suzuki SV 650/S (01-08) Item #: 1t-49062 |
$114.88
|
This kit allows the license plate to be mounted on the left side of the swingarm. Mounts in the holes for the swingarm spool and the chain guard.
High quality Chrome
Easy installation
Mounts either vertically or horizontally
License plate bracket is fully adjustable
Lifetime warranty!
Made in the USA!
Pictures show the clear anodized version NOT the chrome
 |
|
 |
| -TiteBike- (tm) License Plate Relocation Kit: Kawasaki ZX6, ZX600RR, 636, Z1000, ZX12, ZX9, ZX7 Item #: 1t-48854 |
$79.88
|
This kit allows the license plate to be mounted on the left side of the swingarm.
High quality aluminum clear anodized
Easy installation
Mounts either vertically or horizontally
Lifetime warranty!
Made in the USA!
NOT available ANYWHERE else
Picture shows the 1t-48853 (NOT this item) mounted on a 2005 Kawasaki ZX10
Replaces Kawasaki part number 33040-1114, left chain adjuster
|
|
 |
| -TiteBike- (tm) License Plate Relocation Kit: Kawasaki ZX9 (98-99) & ZX10R (04-08) Item #: 1t-48853 |
$79.88
|
This kit allows the license plate to be mounted on the left side of the swingarm.
High quality aluminum clear anodized
Easy installation
Mounts either vertically or horizontally
Lifetime warranty!
Made in the USA!
Picture shows it mounted on a 2005 Kawasaki ZX10 (ZX1000)
Replaces Kawasaki part number 33040-1109, left chain adjuster
|
|
 |
|
 |
| -TiteBike- (tm) License Plate Relocation Kit: Suzuki SV 650 /S (2001-2008) Item #: 1t-0012 |
$79.88
|
This kit allows the license plate to be mounted on the left side of the swingarm. Mounts in the holes for the swingarm spool and the chain guard.
High quality aluminum clear anodized
Easy installation
Mounts either vertically or horizontally
License plate bracket is fully adjustable
Lifetime warranty!
Made in the USA!
|
|
 |
| -TiteBike- (tm) License Plate Relocation Kit: Yamaha R1 (00-05), R6 (99-05), R6S (06-08) Item #: 1t-0016 |
$79.88
|
This kit allows the license plate to be mounted on the left side of the swingarm. It replaces your chain adjuster with a new billet chain adjuster that incorporates the license plate mount!
High quality aluminum clear anodized
Easy installation (must remove and replace axle)
Mounts either vertically or horizontally
License plate bracket is fully adjustable
Lifetime warranty!
Made in the USA!
NOTE: Will NOT fit the new 2006 YZF-R6.
|
|
 |
| -TiteBike- Universal License Plate Mount Item #: 1t-0099 |
$26.88
|
This mount will bolt on to ANY TiteBike relocation bracket
If we do NOT make a bracket for your bike you can purchase this mount and make your own bracket
Mounts either vertically or horizontally
Adjustable in 1 of 2 horizontal positions or in 1 of 5 vertical positions!
Includes (2) 6mm counter-sunk bolts & (2) 6mm nylon insert lock nuts
Lifetime warranty!
Made in the USA!
High quality aluminum clear anodized
|
|
 |
| -TiteLite- Auto License Plate Light Kit - Domed Head Polished Finish Item #: 030309 |
$36.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
Kit contains 2 lights for the top and two bolts for the bottom.
 |
|
 |
| -TiteLite- Auto License Plate Light Kit - Domed Head Satin Finish Item #: 030301 |
$30.45
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
Kit contains 2 lights for the top and two bolts for the bottom.
|
|
 |
| -TiteLite- Lighted Buttonhead Bolts Item #: 03030x |
$9.67
|
Polished, hex head button head bolts with a 12 volt colored bulb installed to shine though the hex head. Sold individually. 5/16" x 3/4"
|
|
 |
| -TiteLite- Motorcycle License Plate Lights - Acorn Head Polished Finish (pair) Item #: 030311 |
$29.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
Thread pitch 5/16" x 18
|
|
 |
| -TiteLite- Motorcycle License Plate Lights - Domed Head Polished Finish (pair) Item #: 030310 |
$24.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
|
|
 |
| -TiteLite- Motorcycle License Plate Lights - Domed Head Satin Finish (pair) Item #: 030302 |
$21.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
|
|
 |
|
 |
|
 |
|
 |
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| ECLIPSE SECURITY BLACKOUT LICENSE FRAME KIT Item #: 22-153 |
$249.88
|
| Designed and intended for show bikes and display purposes only. The Eclipse License Plate Frame has a clear glass panel that goes dark with the flip of a dash or fairing, mounted switch. A red LED light indicates when The Eclipse is dark, so you wont accidently ride off with the license plate obscured. 12v powered - includes wiring, fuse, switch, LED, controller and instructions. The Eclipse is not legal for street or public road use. |
|
|
| LICENSE PLATE BRACKET Item #: RU36480 |
$22.88
|
Universal fit for most models - fits all Rumble Undertail kits
Made from Stainless Steel
Drill two holes to mount
|
|
 |
|
 |
| Targa Led Turn / Signal License Mount Assy - Red Item #: 07-600R |
$60.57
|
| Install these super bright LEDs on your license plate bracket for use as marker or signal lights. Simple installation by placing the stamped bracket between your license plate and the bracket, wire to your existing signal wires and youre ready to go. 12v - 2 wire. |
|
 |
| Targa Led Turn / Signal License Mount Assy - Amber Item #: 07-600A |
$60.57
|
| Install these super bright LEDs on your license plate bracket for use as marker or signal lights. Simple installation by placing the stamped bracket between your license plate and the bracket, wire to your existing signal wires and youre ready to go. 12v - 2 wire. |
|
|
|
 |
| TARGA COMBINATION REAR LED LIGHT, BLACK w/ SWIVEL BASE Item #: 07-5010B |
$49.67
|
COMBINATION LED LIGHT W/ SWIVAL BASE - TAILL/STOP/SIGNAL
This Compact LED Light module has 6 Red center LEDs for Taillight/Stop light function and 8 amber LEDs (4 left/4 right) for signal markers. This LED Light unit is in a sleek black housing with a clear lens and is only 6 1/2 wide and 7/8 high. Available in two styles, Swivel base mount for undertail, fender or tailpiece mounting. Not DOT approved. NOTE: To be used with stock Stop/Tail Light - NOT intended to be used as replacement. LEDs for Signal/Marker use require LED Flash Controller (07-H505R) - Order seperately. Fits all Bikes. |
|
 |
| TARGA INCANDESCENT LICENSE LIGHT - WHITE Item #: 07-4080W |
$38.06
|
INCANDESCENT LICENSE LAMP-POLISHED ALUMINUM HOUSING
This bright light is enclosed in a machined aluminum housing with a 6mm threaded stud allowing it to be mounted to the license plate hole with no drilling. It will light a license plate no matter where the plate is mounted. (Stock location or undertail, rear axle mount or any custom location). We recommend it for use with the Titebike axle mount relocation kit. Sold individually.
Size is 5/8 diameter x 1-3/4 long.
Not DOT approved.
Fits: ALL BIKES |
|
 |
| TARGA LED LICENSE BOLT SET Item #: 07-4012BR |
$32.19
|
| Mount your license plate with these really bright LED License Plate Lights and get additional visability. Can be wired to turn, stop or running lights as desired. With the small 6mm diameter mounting stud, they may be installed easily to any part of the bike with a small 1/2" dia. hole. Sold in pairs. (not DOT approved)12 v/ red lamp. |
|
 |
| TARGA LED LICENSE LIGHT - WHITE Item #: 07-5157W |
$37.35
|
LICENSE PLATE LIGHT-MACHINED ALUMINUM HOUSING-WHITE LED
These Bright White LED lights are housed in a super small machined aluminum body, only 3/10 x 7/10 in size. The LED light is installed at a 90 angle making for an ideal mount on either the undertail or license plate. Requires a 5/16 hole for mounting. Sold individually. Not DOT approved.
Fits: ALL BIKES |
|
 |
| TARGA LICENSE LIGHT WHITE LED Item #: 07-4072W |
$36.06
|
| For use on Undertails, the LED License Plate Lights are only 5/8diameter and 5/8 high with a white LED bulb. Installation will require drilling a single 5/16 diameter hole. 12v - 2 wire. Sold individually.
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| Yana Shiki KAWASAKI ZX-14 (06-07) PEG MOUNT LICENSE PLATE BRACKET (ANODIZED BLACK) Item #: A3063AB |
$160.65
|
| CUSTOM ANODIZED BLACK BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE KAWASAKI ZX-14 (06-07). HAS "ZX-14" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT., NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS... |
|
 |
| Yana Shiki KAWASAKI ZX-14 (06-07) PEG MOUNT LICENSE PLATE BRACKET (POLISHED) Item #: A3063 |
$147.15
|
| CUSTOM POLISHED BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE KAWASAKI ZX-14 (06-07). HAS "ZX-14" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT., NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS... |
|
 |
|
 |
|
 |
| Yana Shiki STANDARD UNIVERSAL BLACK TAG BRACKET Item #: YS2549052 |
$109.98
|
| This tag bracket mounts to your stock swingarm and is made of 100% billet aluminum powder coated black.
FITS THE FOLLOWING MODELS:
VMAX (ALL YEARS)
CBR 600 F4/F4i (99-06)
CBR 600RR (03-04)
SUZUKI OIL COOLED (88-92) |
|
 |
|
 |
|
 |
|
 |
| Yana Shiki SUZUKI PEG MOUNT LICENSE PLATE BRACKET (ANODIZED BLACK) Item #: A3065AB |
$160.65
|
CUSTOM ANODIZED BLACK BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE SUZUKI. It HAS "GSXR" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT. NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS...
FITS THE FOLLOWING MODELS:
GSXR 600 (01-05)
GSXR 750 (00-05)
GSXR 1000 (01-04)
HAYABUSA (ALL) |
|
|
| Yana Shiki SUZUKI PEG MOUNT LICENSE PLATE BRACKET (POLISHED) Item #: A3065 |
$147.15
|
CUSTOM POLISHED BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE SUZUKI. It HAS "GSXR" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT. NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS...
FITS THE FOLLOWING MODELS:
GSXR 600 (01-05)
GSXR 750 (00-05)
GSXR 1000 (01-04)
HAYABUSA (ALL) |
|
 |
|
 |
|
 |
|
 |
|
|
|
 |
|
 |
|
 |
|
powered by