|
|
| FastFind: |
|
|
|
| Selling motorcycle parts Since 1975!
|
 |
On orders placed before midnight this Sunday (11/23/2008)
(Free Shipping for lower 48 US only)
|
|
|
|
|
| |
|
|
| |
 |
|
 |
 |
| UNIVERSAL RISERS, 1'' BAR STYLE, 1'' UP - HONDA'S ONLY Item #: H121 |
$65.95
|
| The H121 risers fit Honda 1" diameter tube style handle bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.
|
|
 |
| Universal Risers, 7/8'' bar style handlebar risers - 1'' up Item #: X103/X104 |
$76.95
|
| The X103/X104 risers will fit any nearly any motorcycle with a standard bolt patter using 7/8" (20mm) diameter tube style handlebars. Please use reasonable caution when testing them on new models.
The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Most models require no change of any control cables, wiring, or hoses. X104 risers are identical in specs, with a black anodized finish.
|
|
 |
| UNIVERSAL RISERS, 7/8'' TUBE TYPE HANDLEBARS, 1'' UP & 1 3/8'' BACK Item #: X102 |
$110.95
|
| The risers replace the stock 7/8" tube type handlebar clamp-cap to raise the bars up 1" (25mm) and back 1 3/8" (35mm). This will help to relieve wrist and neck pain on long rides. May require some re-routing of control cables, wiring, or hoses. X102B is the black anodized version of X102. Does not fit 1" tube handlebars.
|
|
|
| Woodcraft 50mm Clip-ons - 1'' Riser Item #: 12-1550 |
$178.88
|
| These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses. |
|
|
| Woodcraft 50mm Clip-ons - 1-1/2'' Riser Item #: 12-2550 |
$178.88
|
| These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses. |
|
|
| Woodcraft 50mm Clip-ons - 2'' Riser Item #: 12-3550 |
$178.88
|
| These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses. |
|
Email questions to: Service10@1Tail.com
To place your order by phone: 303 872 0329
|
| Phone hours: Monday through Friday: 10:00 am to 5:00 pm (MST)
Para toda la gente que habla español: Llámenos o mándenos un email. Se habla español. |
|
|
|
powered by
