 |
| Woodcraft 32mm Clip-ons Item #: 12-0132 |
$244.88
|
SPECIAL ORDER
These are a special order item and take 2 weeks to ship. (That's why they are so darn expensive!) |
|
 |
| Woodcraft 33mm Clip-ons Item #: 12-0133 |
$244.88
|
SPECIAL ORDER
These are a special order item and take 2 weeks to ship. (That's why they are so darn expensive!) |
|
 |
|
 |
|
 |
|
 |
| WOODCRAFT 36MM EX250 (88-04)/EX500 (87-93 ONLY) CLIP-ONS Item #: 12-0236 |
$165.10
|
| These trick CNC-machined towers will put your handlebars in a vastly better racing position by both lowering the bars and rotating them down to a rider-friendly 5 degree angle from their OEM straight across position. These risers are adjustable for sweep angle and will not interfere with either the stock fuel tank or gauge cluster.
|
|
 |
|
 |
| Woodcraft 37mm EX500 (94-07) Clip-ons Item #: 12-0237 |
$153.95
|
| These trick CNC-machined towers will put your handlebars in a vastly better racing position by both lowering the bars and rotating them down to a rider-friendly 5 degree angle from their OEM straight across position. These risers are adjustable for sweep angle and will not interfere with either the stock fuel tank or gauge cluster.
|
|
 |
|
|
| Woodcraft 39mm Clip-ons Item #: 12-0139 |
$244.88
|
SPECIAL ORDER
These are a special order item and take 2 weeks to ship. (That's why they are so darn expensive!)
If converting a Harley-Davidson motorcycle to clip-ons, you MUST measure your handlebar diameter. Most H-D models use 1" bars. If this is the case, please order Harley Davidson Clip-On Bars, item #13-0101 in addition to the clip-ons. They REPLACE the bars in your 39mm kit when ordered at the same time. |
|
 |
|
 |
| Woodcraft 41mm Clip-ons - Ninja 650 Item #: 12-0141SP |
$144.88
|
| Woodcraft 2 piece split clipons are specially designed to make installation and removal a snap. Our 2 piece design is race proven and makes it easy to service your clipons below the triple clamp without having do dis-assemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12” long and are easily adjusted to whatever custom width you desire.
These clipons come with special spacers and bolts to allow them to be used on the Ninja 650 OEM clamp. This is a race application - make sure that your bodywork has clearance for clipons. |
|
 |
|
 |
|
 |
|
 |
|
 |
| Woodcraft 50mm Clip-ons Item #: 12-0150 |
$149.99
|
| Note that this model clip-on is NOT for the 2006-2007 GSXR600 or GSXR750 - these bikes use a 50/48 tapered clip-on. Order 12-0350 for the 2006-2007 GSXR600 or GSXR750. |
|
|
| Woodcraft 50mm Clip-ons - 1'' Riser Item #: 12-1550 |
$178.88
|
| These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses. |
|
|
| Woodcraft 50mm Clip-ons - 1-1/2'' Riser Item #: 12-2550 |
$178.88
|
| These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses. |
|
|
| Woodcraft 50mm Clip-ons - 2'' Riser Item #: 12-3550 |
$178.88
|
| These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses. |
|
 |
|
 |
|
 |
| Woodcraft 52mm Yamaha TZ250 15deg. Clip-ons Item #: 12-0252 |
$153.88
|
| These trick additions to the Woodcraft line are set with GP-spec 15 degree down angle and are specially designed for the popular Yamaha. They give TZ riders easy access to inexpensive replacement bars as well as the hassle free Woodcraft installation and removal.
|
|
 |
|
 |
|
 |
|
 |
| Woodcraft GSXR 1000 (01-04) Clip-ons Item #: 12-0250 |
$144.88
|
| These are the only clip-ons that fit the big Suzuki properly. Just below the triple clamp the forks taper down to 49mm, making it impossible for conventional 1 piece clip-ons to properly grab the tube. Woodcraft's exclusive 2 piece design gets the job done with confidence!
|
|
 |
| Woodcraft GSXR 600/750 (06-07) Clip-ons Item #: 12-0350 |
$144.88
|
| Woodcraft 2 piece split clipons are specially designed to make installation and removal a snap. Our 2 piece design is race proven and makes it easy to service your clipons below the triple clamp without having do dis-assemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12” long and are easily adjusted to whatever custom width you desire. |
|
 |
| WOODCRAFT REPLACEMENT BAR FOR CLIP-ONS Item #: 13-0100 |
$26.00
|
| These bars work with any Woodcraft clip-on. Make sure to order enough extra bars so you are not left in the stands instead of on the track. |
|
 |
| WOODCRAFT: RESERVIOR BRACKET - SUZUKI GSXR 600 (01-05) / 750 (00-05) / 1000 (01-04) Item #: 12-3240 |
$18.60
|
| This bracket is a simple solution to mount your master cylinder bracket on a late model Suzuki. You simply remove the top triple clamp bolt and secure this bracket to the top clamp, giving you a solid place to bolt the reservoir. Sold with hardware to make the job complete.
On most applications the brake reservoir mounts to the stock clip-on and when aftermarket clip-ons are installed there is not place to mount the reservoir
Designed for: 01-05 GSXR600,
00-05 GSXR750,
01-04 GSXR1000, and should fit just about any other application.
|
|
 |
|
powered by 