|
| -TiteBike- (tm) License Plate Relocation Kit: Kawasaki ZX6, ZX600RR, 636, Z1000, ZX12, ZX9, ZX7 |
This kit allows the license plate to be mounted on the left side of the swingarm.
High quality aluminum clear anodized
Easy installation
Mounts either vertically or horizontally
Lifetime warranty!
Made in the USA!
NOT available ANYWHERE else
Picture shows the 1t-48853 (NOT this item) mounted on a 2005 Kawasaki ZX10
Replaces Kawasaki part number 33040-1114, left chain adjuster
 |
| |
| This item usually takes about 1 to 2 days to ship |
| |
| Item no. 1t-48854 |
| Today$79.88 |
|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 2003 Kawasaki Z1000 |
|
|
| 2004 Kawasaki Z1000 |
|
|
| 2005 Kawasaki Z1000 |
|
|
| 2006 Kawasaki Z1000 |
|
|
| 2007 Kawasaki Z1000 |
|
|
| 2008 Kawasaki Z1000 |
|
|
| 2000 Kawasaki ZX 12R Ninja |
|
|
| 2001 Kawasaki ZX 12R Ninja |
|
|
| 2002 Kawasaki ZX 12R Ninja |
|
|
| 2003 Kawasaki ZX 12R Ninja |
|
|
| 2004 Kawasaki ZX 12R Ninja |
|
|
| 2005 Kawasaki ZX 12R Ninja |
|
|
| 1996 Kawasaki ZX 6R Ninja |
|
|
| 1998 Kawasaki ZX 6R Ninja |
|
|
| 1999 Kawasaki ZX 6R Ninja |
|
|
| 2000 Kawasaki ZX 6R Ninja |
|
|
| 2001 Kawasaki ZX 6R Ninja |
|
|
| 2002 Kawasaki ZX 6R Ninja |
|
|
| 2007 Kawasaki ZX 6R Ninja |
|
|
| 2008 Kawasaki ZX 6R Ninja |
|
|
| 2003 Kawasaki ZX 6R Ninja (636) |
|
|
| 2004 Kawasaki ZX 6R Ninja (636) |
|
|
| 2005 Kawasaki ZX 6R Ninja (636) |
|
|
| 2006 Kawasaki ZX 6R Ninja (636) |
|
|
| 2003 Kawasaki ZX 6RR Ninja |
|
|
| 2004 Kawasaki ZX 6RR Ninja |
|
|
| 2005 Kawasaki ZX 6RR Ninja |
|
|
| 2006 Kawasaki ZX 6RR Ninja |
|
|
| 2007 Kawasaki ZX 6RR Ninja |
|
|
| 1996 Kawasaki ZX 7R |
|
|
| 1997 Kawasaki ZX 7R |
|
|
| 1998 Kawasaki ZX 7R |
|
|
| 1999 Kawasaki ZX 7R |
|
|
| 2000 Kawasaki ZX 7R |
|
|
| 2001 Kawasaki ZX 7R |
|
|
| 2002 Kawasaki ZX 7R |
|
|
| 2003 Kawasaki ZX 7R |
|
|
| 2004 Kawasaki ZX 7R |
|
|
| 2005 Kawasaki ZX 7R |
|
|
| 1994 Kawasaki ZX 9R NINJA |
|
|
| 1995 Kawasaki ZX 9R NINJA |
|
|
| 1996 Kawasaki ZX 9R NINJA |
|
|
| 1997 Kawasaki ZX 9R NINJA |
|
|
| 2000 Kawasaki ZX 9R Ninja |
|
|
| 2001 Kawasaki ZX 9R Ninja |
|
|
| 2002 Kawasaki ZX 9R Ninja |
|
|
| 2003 Kawasaki ZX 9R Ninja |
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I Do not see 1999 ZX9R and I need a side mount. Does this one not fit or was the 99 ZX9r accidentally excluded from your list. |
| ANSWER: This one does not fit the 1999. You need part number 1t-48853. |
|
| QUESTION: Does this kit come with a license plate lighting system because it illegal in Canada not to have a lighting system |
| ANSWER: No, it doesn't. You have to choose one of the options on the page for lights. There are three suggested on the product ordering page. |
|
| QUESTION: do these fit a 2006 ninja 650R? |
| ANSWER: This part will not fit on the Ninja 650R. WE are considering developing this part, please check back on the website in another month. |
|
| QUESTION: Could you please tell me what is the largest horizontal distance in inches between the 2 holes that are the furthest away from each other?I need it to check if it will hold my plate
Thanks |
| ANSWER: 5" |
|
| QUESTION: Thank you for the information. But, I also would like to know how difficult is it to install, will I need to bring it to a bike shop for installation?
|
| ANSWER: We recommend all modifications be done by a trained mechanic. |
|
| QUESTION: Hi...
Eiman from denmark...
Is the plate still there after hi speeds?
And do you think at i can use danish plates? they are 9,4 × 6,5 inch |
| ANSWER: The license plate will stay on at any speed. You many have to drill out your license plate to make the holes line up. Other than that, it should fit. |
|
| QUESTION: In the description it says this is made for the 600RR, So will this fit the 2005 Honda CBR600RR? |
| ANSWER: This product only fits Kawasakit models - in this case the complete Kawasaki model number is ZX600RR, and we are immediately correcting the description on this item to reflect that exact model. The Honda CBR600RR and CBR1000RR models are on our development schedule, so look for this part to be available in August 2006. |
|
| QUESTION: Does the TiteBike- (tm) License Plate Relocation Kit: Kawasaki ZX6, 600RR, 636, Z1000, ZX12, ZX9, ZX7 include a light kit? |
| ANSWER: No, the lights are options you can choose here in three different styles. |
|
| QUESTION: Do you ship to Canada? Do you have to take the chain adjuster completely off, and if so how do you properly adjust the chain? |
| ANSWER: We do ship to Canada. The kit replaces the chain adjuster with a similar piece that has holes drilled in it for mounting the bracket so you can still adjust the chain. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
powered by