Application Chart Diagrams
Application
2003 Ducati Monster
2004 Ducati Monster
2005 Ducati Monster
2006 Ducati Monster
2007 Ducati Monster S4Rs Testastretta
Buy more pay less!
- Buy 2…pay only $111.95 ea.
Customer Feedback:
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Reading all these stupid questions was a bit like watching bass fishing on TV. Once it's on, it's hard to turn the channel!
ANSWER: or..."are you smarter than a fifth grader?"
QUESTION: Hi sir, Do you have to make the frame shorter before it fits ? And how many inches/cm ?
Best regards from the netherlands
ANSWER: yes... about 4"
QUESTION: Will it fit my 2002 monster 620 dark
ANSWER: yes
QUESTION: I can't believe no one asked already but will it fit a 2008 S2R1000? I hope the answer isn't 'NO!':)
ANSWER: yes
QUESTION: Will it work with a 2009 Ducati Monster 696?
ANSWER: No the 696 will be Part # 1DMON2 avail mid August
QUESTION: will it work with a 2002 s4 with high mount Termignoni exhaust ?
ANSWER: ????????????????don't know
QUESTION: Hi. Do you have this item in stock? Thanks.
ANSWER: yes.....always
QUESTION: will this kit work on a 2008 sportclassic 1000 biposto. they do not make any kits for that bike and i've been looking for a kit that i might be able to modify slightly to make it work.
ANSWER: Sorry....No...
QUESTION: Hi, can you let me know what the total cost of your monster fender eliminator kit is please, including shipping. Thanks Rob
ANSWER:
QUESTION: Hello , how much shipping to Greece? Thank you
ANSWER:
QUESTION: Hiya how much in GB Pounds?
ANSWER:
QUESTION: Are you getting your answers form a magic 8 ball? You didn't answer my question, does this kit come with a new seat release cable to replace the long, stock one?
ANSWER: No...... its not needed.
QUESTION: I will be installing this on a 1994 Ducati M900. The original seat release cable is very long and lies beneath the stock fender. Once the fender is removed, I will have a rediculously long exposed cable to tend to. Does this kit come with a new seat release cable or assembly to replace/relocate the stock one?
ANSWER: never have had an issue with it....
QUESTION: Will this kit work on the 2008 M695?
ANSWER: no!
QUESTION: Are you getting tired of hearing and answering the same question "Does this kit fit my Monster"? You have said multiple times this kit fits all Monsters. You even have pictures displayed showing the process!
ANSWER: At least its a question I know the answer to.....
QUESTION: Does this also fit a M900 from '95?
ANSWER: we here it does...
QUESTION: To go on a trip,is it possible to mount a luggage rack after doing the tail chop ?
ANSWER: Not if it mounts off the subframe....
QUESTION: Will i likely to be sprayed with water more when this tail chop is done
ANSWER: yes...... it eliminates the fender. More looks than function.
QUESTION: You say this works on the S4R 2007 model, will it also work on the 2007 S2R 1000?
ANSWER: yes
QUESTION: I have a 1999 Monster, which has the blinkers connected to the tail fender, will this specific kit fit my bike too?
ANSWER: yes
QUESTION: WIll this fit on a monster 695 07'
ANSWER: yes
QUESTION: I have some after market turn signals with a similiar installation structure...will these fit with the kit?
ANSWER: yes
QUESTION: After the tail chop, would the Rizoma Track 1 turn signals mount flush instead of reattaching the stock lights?
ANSWER: Never seen the Rizoma..... but flush mount V's do
QUESTION: do you send it to portugal?
pay on collection is possible?
ANSWER:
QUESTION: Does this kit retains the OEM signal lights for 06 S2R 1000?
ANSWER: yes
QUESTION: Will this fit the S2R 800 '07?
ANSWER: yes
QUESTION: Hi,do you ship item 1DMON ,to the U.K.?If so how much will the total be?
Thanks.
ANSWER:
QUESTION: Can you give me the dimensions of the l bracket?
ANSWER: designed for a 4"x7" plate
QUESTION: Will your fender eliminator kit (Item no. 1DMON) work for my 2005 Duc monster S2R?
ANSWER: yes
QUESTION: do you know of any rusting or pitting problems with the subframe after the chop...and does this mod afect the value of my M600?
ANSWER: Kit comes with plugs.... I'd silicone them on... shouldn't have an rust issues
QUESTION: Hi
Does this kit work on a 2000 monster 600 dark? And do i need to buy new breaklights?
ANSWER: Works fine....... uses all stock lighting
QUESTION: On a late model Ducati Monster, is the seat lock retained?
ANSWER: Yes, it does not get changed
QUESTION: Will the relocation of the signal lights for the 04 monster interfere with the passengers legs? From the picture, it looks like it might be right under their thighs.
ANSWER: Not unless their thighs have excessive droopage. Never heard of a problem!
QUESTION: I like the look of this kit. I would like to install it on my 97. Will it work?
ANSWER: yes it should work on all Monsters......
QUESTION: Do you know of any one making a fender eliminator kit for the Ducati Sport 1000?
ANSWER: sorry, no
QUESTION: Do you ship to Toronto, Canada?
ANSWER: Yes
QUESTION: will this kit fit a 2007 monster 695
ANSWER: yes
QUESTION: Does the kit come with frame plugs, if so is there a choice in color? If not where could I find them?
ANSWER: black plugs
QUESTION: I was under the impression that the unit was a brake light and turn signal mount as well. I would like a mount for the brake light and turn signals, but not the licence plate. Thnaks.
ANSWER: The tail light and lic plate mount to the same bracket...... we can not seperate them.
QUESTION: Is it possible to get this without the license plate mount? I have an alternative mount for it. Thanks.
ANSWER: Sorry don't understand.......this is a lic plate mount.
QUESTION: What is the best method / tool for cutting the subframe to install the fender elimination kit on my 2005 S4R?
ANSWER: Hack saw..............
QUESTION: I have a 1996 m900 monster will this part work on im bike a do you ship to NZ
ANSWER: yes..........NZ Yes
QUESTION: Does this kit come with instructions?
ANSWER: yes
QUESTION: Will this work on 2005 Ducati ST4S
ANSWER: Yes
QUESTION: Does this work for a 2006 monster 620?
ANSWER: yes
QUESTION: with the relocation of the turn signals will i then be able to fit a high mount exhaust with no interferences?
ANSWER: Should be able since the signals are above the subframe....
QUESTION: Will this part work on a 07 Monster S4Rs?
ANSWER: probably, but we haven`t tried it. Many people have purchasd and installed them on 07s, and reported no problems
QUESTION: Hi, I have a Monster S4 2001, would this kit work?
ANSWER: yes
QUESTION: I live in the Philippines,and i have a 2004 s4r,im interested in the fender eliminator.Would it work on this model?Thank you.
ANSWER: Yes
QUESTION: the portion of the frame that has to be removed is only used by the taillight assembally, correct? there will be no problem for having a second rider, or weight issues on the back of the seat, right?
ANSWER: Correct.
QUESTION: I also have a BMW Rockster and have been searching for a fender eliminator - HELP!
ANSWER: sorry........
QUESTION: For the 2006 S2R, do I need to cut the frame as well? I see all previous years do, but not sure about the '06.
ANSWER: As far as I know YES. All the frames are the same.
QUESTION: Are the holes for the turn signals pre cut out? If so can I get it with out? I plan to use a ingrated tail light and I think it would look better with no holes. Thanks for you time.
ANSWER: They are on a seperate bracket. Simply do not install that bracket.
QUESTION: Just put a down payment on the NEW 2007 S4RS Testastretta, will you be offering the Eliminator kit for that as well, or will this kit work on it? And when would it be available if not?
ANSWER: It looks like this one will work, but we're not 100% sure.
QUESTION: Do you have a kit for the 2002 750 Monster? And, do I have to cut the frame?
ANSWER: This kit fits ALL Monsters. Yes, the frame gets cut.
QUESTION: Hello,
I have an '01 monster 900. I just did a tail shop on it and installed a led brake system with built in turn signals. The problem I have run into is that there is no where to mount the taillight since I chopped off the tail that had holes for the old plastic fender.
So my question is how does your fender kit work? Where does it mount to? If you have any actual pictures of the kit that would help me out. Please let me know.
Thanks, Stefan
ANSWER: Call Competition Werkes (541)673-6059 they'll know exactally what you need.
QUESTION: Does this bracket fit the new 2006 S2R 1000?
ANSWER: yes.
QUESTION: Has your company, or any others for that matter, manufactured a fender eliminator for the new Ducat Sport 1000 or the Paul Smart? I have a sport 1000 and am desperately in need of one. I would imagine its not going to be too different than the Monster.
Please get back to me.
Nark
ANSWER: Call Competition Werkes
QUESTION: I live in SINGAPORE and I'l like to purchase this Monster Fender Eliminator. Do you ship them to SINGAPORE? and the price is $116.95 and no other charges? Cheers!
vincent@eazistore.com
Vince Kam
ANSWER: There would be additional charges for shipping
QUESTION: My turn signals are integrated into the brake light. So I do not need the turn signals relocated. Will there be anything exposed like the empty turn signal mounts assuming it is integrated with the kit install? If not do I even have to install that part of the kit?
ANSWER: It will look fine either way.
QUESTION: do you need to splice the wires on any of the lights? Furthermore, do the original signals appear to be too large once the ass is trimmed up?
ANSWER: No it's all stock connections. Signals look good. Smaller signals always look better, but stock signals are always the most reliable.
QUESTION: I'm not very handy, will I be able to do this easily?
ANSWER: Just takes guts! no skills required.
QUESTION: What types of tools would I need?
ANSWER: Normal metric tools and a hacksaw
QUESTION: Will this kit work on a 2000 M750?
ANSWER: We have been told that it does fit by someone who installed one on that model. We have not tried a direct fit.
QUESTION: Do you have any pictures of the installation process ? eg before and after the frame cut.
ANSWER: No other photos avail.
QUESTION: Is this the same kit as the Competiton Werkes? It looks the same with the same picture...thanks in advance.
ANSWER: This is a Competition Werkes kit.
QUESTION: hey there, what kind of hacksaw blade is best to cut the subframe?
ANSWER: Fine tooth metal blade
QUESTION: Has anyone tried this kit w/a 2000 750?
ANSWER: Not sure, but we hear it fits ALL Monsters
QUESTION: Does the kit come with plugs for the frame bar cuts???
ANSWER: Yes
QUESTION: greetings,
Do you make a fender eliminator kit for a ducati 1996 m900?
ANSWER: Have never done a fittment, but hear all monster's are the same.
QUESTION: Do you make a fender eliminator kit for a 97 ducati 900ss cr and/ or where I could find one
ANSWER: NO, Sorry
QUESTION: Do you guys make a fender eliminator kit for a 2004 BMW R1150R Rockster?
ANSWER: no.
QUESTION: I didn't see any differences when comparing the bikes but wanted to ask before I ordered, this kit should work on an 05 S4R correct? Thanks.
ANSWER: Yes.
QUESTION:
I am interested in purchasing one of your Fender Eliminator's, however I would like to get a more detailed description of instructions before I make the purchase. What exactly are you talking about when you say the sub-frame will have to be cut?
ANSWER: The 3/4" tubular frame off the back.
QUESTION: Does the hardware you provide support the brake light? When the 2 bars are cut off, so is the original support for the brake light!!
ANSWER: Of coarse. It's a complete kit. This is not some cheap universal kit like others on the market. It relocates your Stock taillight, turnsignals, and license light. It's made of stainless steel and all the instructions and hardware are included.
QUESTION: Does this kit have the tail light mount directly to your kit? As my Monster frame doesn't have this mount.
Thanks
ANSWER: Yes, The kit relocates your tail light, lic light, and turn signals.
QUESTION: Is it legal in new york state
ANSWER: It's visible and illuminated. So it should be. You need to check with your DMV for exact laws in your area.
QUESTION: any chance I could make this work on a '98 Ducati ST2?
ANSWER: Don't know. Doubt it!
QUESTION: Hello,just wondering what is included in your kit and what is reused from my bike,i have a 2003 620 ducati thank you. This is for 1DMON.
ANSWER: We reuse your signals and lic light. Giving you new mounting brackets for both. Also a new lic plate mount, good instructions, and hardware.
QUESTION: hi
i have a monster 2002 dark 620. will this kit work for my bike? what about the bars that extend out?
ANSWER: We've been told ALL Monsters have the same tail and sub frame. Unfortunitly we can ONLY guarantee fittment on the years shown, since these are the bikes we personaly fitted. The subframe does need to be cut on ALL models.
Ask your question here:
Your email (so we can send you the answer):
powered by
