GSXR 600/750 04-05 Fender Eliminator Kit
Kit comes with new flush mounted signals and license plate light.
This item usually takes about 1 to 2 days to ship
Item no. 1S755
Retail: $144.95(PLUS shipping)
Today$141.95
Application Chart Diagrams
Application
2004 Suzuki GSX-R 600 (K4)
2005 Suzuki GSX-R 600 (K5)
2004 Suzuki GSX-R 750 (K4)
2005 Suzuki GSX-R 750 (K5)
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: If a plane crashes on the border of the United States and Canada, where do you burry the survivors??
ANSWER: Montana...... everyone knows that! They bury 'em dead or alive! We won't say what else they do....
QUESTION: can i just order these types of light without the undertail cause I can't find them on the site
ANSWER: they are flush mount V's ......
QUESTION: How can I get a hold of Comp Werkes?
ANSWER: 800 736-2114
QUESTION: Do you ship to Canada? And is it free shipping?
ANSWER:
QUESTION: I have a 2005 gsxr 600 and was wondering do they have a kit without turn signals,because I want to put mine in my taillight
ANSWER: we only carry complete kits
QUESTION: i have a 2004 gsxr 600 and i was wondering how much just the vented steel
plate for the fender eliminator kit 1s755 would be ?
ANSWER: We can not seperate the kit.
QUESTION: Why does this site show up in the Australian google search?
ANSWER:
QUESTION: can u replace a 2005 gsxr 750 tail with a 2004 gsxr 1000 tail
ANSWER: Ask Suzuki
QUESTION: can u mount the lic plate where the cover plate is, flush against the fender,i tryng to find that custom look
ANSWER: not with this kit
QUESTION: where do the wires for the signals go?Do you have to drill holes for those wires?
ANSWER: those are existing holes....just remove the rivets
QUESTION: does this product come with a license plate bracket as well as a license plate light
ANSWER: yes
QUESTION: Do you have a kit for a 2006(K6) GSXR 750?
ANSWER: about 5-10-06
QUESTION: will this eliminator be available for the K6 600 on 4/10/06 also??
ANSWER: about that time......
QUESTION: HAVE A 2006 GSX-R 750 AND WILL THIS KIT BE RIGHT FOR IT AND WHEN WILL IT BE AVAILABLE.
ANSWER: look for that kit around 4-10-06 as its completely new.
QUESTION: what does it cover and does it have to go on?
ANSWER: Comes with a rear cover plate and relocates the lic plate forward as the photo shows.
QUESTION: what is the ugly metal piece inbetween the turn signals and under the tail light?
ANSWER: its a cover plate
QUESTION: why has no one answered my question? its been a week and a half, is this the same response i will get after i give you $140 for it?
ANSWER: Please restate your question..
QUESTION: what is the ugly metal piece inbetween the turn signals and under the tail light?
ANSWER:
QUESTION: I bought this kit but my license plate bulb light went out. Can I purchase the bulb from you guys. Or do I have to buy another kit.
ANSWER: Call Comp Werkes...they're great with warranty issues
QUESTION: Please correct me if I'm wrong, but I want to make sure I'm clear on this before I order. With this eliminator, the plate is mounted between the rear footpegs, and the metal plate that mounts to the underside of the tail section is the plate light?
ANSWER: Close......except the plate is supported by the foot peg mounts.
QUESTION: Will that license plate bracket fit on 04 gixxer 1k?
i know the plate wont but i already have an undertail i just need a place to mount my license plate so thats the only part of the kit i would use.
ANSWER: prob not....
QUESTION: what size is the bolt? the one on the pegs
ANSWER: Its a 10m x 25m(?)
QUESTION: If I order today, when can I expect to get the fender kit? How many days?
ANSWER: Ussally shipps in one to three bussiness days, then it's three to five days for UPS.
QUESTION: can i have one for free?????
ANSWER: hmmm....................................................................................................NO!
QUESTION: can this fit a 2005 gsxr600
ANSWER: yes
QUESTION: is this tail D.O.T standard?
ANSWER: No it's not DOT approved, check local laws as to legality
QUESTION: Can I mount the undertail plate and license plate bracket without using the signals?
ANSWER: yes
QUESTION: I want to know if I can just buy the license plate braket. Don't need the turn signals or plate to cover the old undertail. I just want to but the license plate braket.
ANSWER: Contact Comp Werkes
QUESTION: I have th Hotbodie fender eliminator and was wondering if the license plate bracket for this kit be sold separately, or where can I just order a bracket that will fit in the same place as the bracket for this kit.
ANSWER: Your on your own once you purchase something from Hotbodies
QUESTION: Hi just wondreing where i can tail Fender Eliminator for a 2005 suzuki gs500. I want to get rid of the piece mith the number plate.
ANSWER: not available
QUESTION: can i get the turn signal in led from this order
ANSWER: No these signals are not offered in an LED form
QUESTION: hey i'm been reading the Q & A, and i noticed that you said that you only have to drill one 1/4" hole for the lic plate, but what about the turn signal lights?? Also, how much gap do you have from the bottom of the lic plate bracket to the top of the tire?? thanks!!
ANSWER: Holes for the signals are existing. Clearance is not an issue as the placement of the plate allows it to drop between the tire and swingarm upon compression of the suspension.
QUESTION: I want to order the kit with the clear turn signals. Would that be clear with an Amber light?
ANSWER: The lens are clear the bulbs are amber
QUESTION: what kind of double sided tape u recommend, what happens if the tape peels off, does the light fall off too?
ANSWER: You have to pry it off. It won't fall off.
QUESTION: I have the old kit where the license plate light is not LED. Is the bulb in the mine replacable and if so how? Thanks
ANSWER: Yes,it requires pulling the light free of the kit, popping open the back of the light, replacing the bulb, adding new two sided tape, reinstall.
QUESTION: why do all these people ask a lot of dumb questions that youve already answered like 5 times before? :-)
ANSWER: Ya think??
QUESTION: What style/size bulb do I need to replace the licence plate bulb? Where can I buy it?
ANSWER: They are now packaged with LED lights no replacements nessessary
QUESTION: I have a hotbodies undertail for my gsxr600 '05, and i also have a carbon fiber hugger , will this kit interfere with both . Like will it hit each other or damage something ? Honest opinion please?
ANSWER: I know it won't work with a hugger. The undertail is prob OK.
QUESTION: Is there any way I can get a hold of just the lic. mounting plate?
ANSWER: contact Comp Werkes
QUESTION: Does it come with that metal plate to cover up the holes were the orginal tail was mounted???
ANSWER: yes
QUESTION: I was curious if the competition werks fender eliminator for the 05 gsxr
600 was in stock? also do you have short stalk signals for the front to
match? can you give me prices on all of this?
-mike
ANSWER:
QUESTION: How is the license plate light mounted and to what is the license plate holder mounted to?
ANSWER: Light mounts to the lic plate bracket (two sided tape). Lic plate mounts to rear footpeg mounts.
QUESTION: Will the license plate be at an angle rather than perpendicular to the ground? It seems as though most bikes I've seen have this problem. Thanks.
ANSWER: If you consider it a problem... yes it at an angle
QUESTION: what has to happen in order to change a bad bulb. would i need to replace the double sided tape
ANSWER: Yes you would need to spend $1.49 at Wal Mart and buy some tape.
QUESTION: How is the licsence plate mounted. is it tucked in flush between the turn signals so it kind of slants back in or does it hang down towards the tire? also is there a light so MR. Police can read the plate.
ANSWER: Its illuminated. Mounts between the rear foot pegs.
QUESTION: are the signals LED or bulbs?
ANSWER: bulbs
QUESTION: are the signals LED or bulbs?
ANSWER: bulbs
QUESTION: I'm looking for the one that fits the 02. Will this one fit?
ANSWER: No. You need the kit that fits the 00-03 750/ 01-03 600. Part # 1S754
QUESTION: Do the lights require splicing or do they have a factory style plug?
ANSWER: They come with butt connectors
QUESTION: Ok so this comes with the license plate and turn signals etc. But will it fit fine under a hotbodies undertail (gsxr 600 04')?
ANSWER: Actually on this bike I've heard it does.
QUESTION: WHAT COLOR ARE THE TURN SIGNAL BULBS
ANSWER: Clear.
QUESTION: how durable is the two sided tape. will it have to be re-taped or siliconed?
ANSWER: It's very durable. Just don't power wash it!
QUESTION: In your opinion, if you have a high mount pipe, can you still see the turn signal well enough?
ANSWER: From behind? YES. From the side? Yes. From a back angle? No.
QUESTION: Does this item come in the color white?
ANSWER: No, Our products are stainless.
QUESTION: will this kit work with an undertail kit ? I like the positioning of the lic plate holder.
ANSWER: Yes, It should but the lic plate light may be tight and need adjusting.
QUESTION: does this kit fit the '05 GSXR 750?
ANSWER: Yes, same bike!
QUESTION: The fender looks nice, but do you have the same type for 03 GSXR 750? I don't like the style of 03 you have here.
ANSWER: No, We make one style per model. Sorry.
QUESTION: Does this eliminator come in white for my 04 gixxer 750?
ANSWER: NO! Stainless steel
QUESTION: Are the turn signal lights legal? Do they come in amber? And How well can you see the license because of how low it looks on the bike?
ANSWER: Our kit is not DOT approved, It is in our opinion visable, and illuminated which is what the law states. Check the photo out the final dicision is yours. The signal can come in amber, but the clear does have amber bulbs.
QUESTION: Can I use this kit on the 2005 GSXR 600? And if not when do you think you will get kits in for the 2005 GSXR's?
ANSWER: If the 05's are already out, that means there were no changes. So it will work!
QUESTION: can i get the turn signals in amber or do they have to be clear?
ANSWER: You can go amber, or smoke (just specify) otherwise they'll be clear.
QUESTION: do you know if this product is legal in new york city
ANSWER: You would need to talk to your DOT or DMV. Federal says a lic plate must be visible from behind and illuminated with a white light, and turn signals need to be 9" apart. Our kit meets those requirements in our opinion. But our kit is NOT DOT approved. Check your local laws if your worried about it.
QUESTION: This is a dumb question but then again there is no such thing as a dumb question. But does this kit come with everything from the license plate holder to turn signals to mounting hardware and lic light?
ANSWER: That is a dumb question! But that's OK, YES! Our kit comes complete, everything listed everything needed.
QUESTION: How much cutting is involved with this kit and is there any cuts to the frame and/ or body of the undertail.
ANSWER: No cutting! One 1/4" hole needs to be dilled through the black plastic only!
QUESTION: Are the turn signals mounted with screws or do they just stick there with adhesive?
ANSWER: The signals mount w/ two sidied tape to our brackets. Which are hard mounted to the bike.
QUESTION: will the factory signals work with your fender eliminator kit.Can it be done?
ANSWER: NO!
QUESTION: This product do all of the wires come with plugs so there is no way to mess it up and also is this legal and do i have to drill any holes for the turn signals to mount up?
ANSWER: It would be very hard to mess this up, but I guess there's always a chance! One 1/4" hole needs to be drilled for the lic light wire. This producted is not DOT approved, but is legal in most states.
QUESTION: are instruction included with purchase?
ANSWER: yes
QUESTION: IS THIS PRODUCT AVAILABLE OR ON BACKORDER?
ANSWER: Available for shipping!
QUESTION: is there anyway you can send me instructions for this product? 2004 gsxr 750 eliminator?
ANSWER: Sorry, no instructions before purchase. Feel free to ask questions!
Ask your question here:
Your email (so we can send you the answer):
powered by
