Application Chart Diagrams
Application
2005 Suzuki GSX-R 1000 (K5)
2006 Suzuki GSX-R 1000 (K6)
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Hey Guys, I just want to thank you for your product. I purchased the kit for my 06 GSXR1000, it was so simple to install, a monkey can do it. It looks great and serves it purpose. Thanxx again!! Smoke,atlanta ga.
ANSWER: Notta prob....
QUESTION: I have 2006 gsxr 1000 and took the stock rear plate/light off, just want piece (blue/stockcolor) flush to put where stock kit was. would b ok if LED lights are in it that connect to rear plug.Where can I find it?
ANSWER: try hotbodies
QUESTION: I have a 2006 GSX-R 1000. Since the license plate light is so far away from the original spot I assume that the stock wires are not used. What does the new light plug into and do you have to splice into any wiring?
ANSWER: come with a wiring extention....
QUESTION: Will this product fit a 2001 GSX 1000R, if not, do they make it for 2001 GSX 1000? Thanks.
ANSWER: No, and No..... pivot mounted plates started on the 05
QUESTION: will this fit a GSXR 11OO 97
ANSWER: no
QUESTION: hey man the 05-06 fits perfectly on the 07 zero problems!!?! I know i did today, perfect fit, it simply uses the same screw on the huger that the 05-06 does, 07 supposed to be different?? I bet it is different......in price
ANSWER: Your wrong..... it's the same price! and the kit is different! The cover plates are completely different, and while the lic mount is similar the bends are different. The lic plate screws in 05-06 kit will scape on the 07 undertail. The depth of the roller bend had to be changed to compensate for the deeper wheel well. To everyone else out there..... Purchase the 07 kit!
QUESTION: Do you have the 07 gsxr1000 kit yet?
ANSWER: Available around May 20th 07
QUESTION: Does the undertail have to come off to relocate the license plate bulb wires?
ANSWER: no
QUESTION: will this fit a 2007GSXR 1000?
ANSWER: no.....07 will be available the end of April.
QUESTION: will this product fit a K7 Gixxer thou?
ANSWER: no.....
QUESTION: Will this fit on a 2007 GSXR 600?
ANSWER: No!!...... try the 1S756LTD fits the 06-07 GSXR 600/750
QUESTION: can i purchase just the aluminum filler plate for a 2006 gsxr 1000
ANSWER: no....
QUESTION: I have a GSXR1000 2006. Does your kit have a spot for our state inspection sticker. What color is the tail underbody?
ANSWER: You must be from Texas....... A texas tag mount is available through Comp Werkes
QUESTION: DO you have the comp werks 05-06 undertail kit in stock right now
ANSWER: yes
QUESTION: Good Afternoon,
Can you tell me the difference between the Competition Werkes Fender Eliminators, Items 1S1004 and 1S1004a?
ANSWER: no difference
QUESTION: IS this kit available for the 06 gixxer 750 yet?
ANSWER: yes....part # 1S756
QUESTION: Is the license plate bracket bolt on?
ANSWER: Yes
QUESTION: do u use adhesive to mount the license plate because from the q&a someone mentioned about the led light being attached with an adhesive
ANSWER: Light uses adhesive......plate bolts on.
QUESTION: a previous q&a states the 06 gsxr 750 kit came out in May 06 - but it is not listed on your site. Can you provide the kit #? Thanks!
ANSWER:
QUESTION: I purchased this kit for my 2005 GSXR 1000 and the light is placed on by an adhesive. The light has fallen off and I recently was issued a ticket. Is there a way to just order the light or am I S.O.L.????
ANSWER: Call Comp. Werkes
QUESTION: Is the 06 gsxr 750 fender kit avaible yet? If so what is the price.
ANSWER: Yes, two kits available
QUESTION: will this fit a 06 gixxer 750? if not, do you have the kit available that will?
ANSWER: No this does NOT fit!!!!!!!!!!! The kit for the 06 600/750 will be out 5-5-06
QUESTION: Which undertale is best to put with this fender eliminater?
ANSWER: Its made for the stock one.
QUESTION: Will this fit a 2005 R6?
ANSWER: no, only the kits made for the 05 r6 will fit.
QUESTION: Will the stock hugger work with this and does it include the plate to cover where the stock tag was bolted to?
ANSWER: yes and yes
QUESTION: will this kit fit the o6 GSXR 750?
ANSWER: We'll have one available by April...........
QUESTION: Is it legal?
ANSWER: You must check local laws as they vary from state to state.
QUESTION: Will this fit the 06 gsxr 600?
ANSWER: no
QUESTION: I have a 06 1000 with a hamaguchi full system, the can goes down a little lower than stock. do you have any kit that will work for it? If so can I order it without turn signals? just so you know how low it is, the stock fender won't fit back on the bike.
thanks,
Matt
ANSWER: what 1000 do you have....is your exhaust a side mount or center mount????????
QUESTION: Can the kit be installed without the hugger?
ANSWER: It can. But it will look unfinished.
QUESTION: What does the plate mount into and will it fold down to not be seen?
ANSWER: It's not designed as a hidden plate. It's pivot mounted for clearance.
QUESTION: I pop alot of wheelies, will the kit effect anything in the back of the udertail when this bike is lifted quickly? Please let me know and I just might buy this.
ANSWER: It'll be fine.
QUESTION: I was wondering if you made this same kit or one like for an 04' gsxr1000! The way it sits way back under the tail!
ANSWER: Sorry NO
QUESTION: I really like this kit do you make the same one for the 04' gsxr1000? I like the way the plate sits way back and is "pivotal" as you call it! All the one for the 04' the plate sits way at the end of the tail by the taillight.
ANSWER: Sorry......
QUESTION: Man this is the sweetest fender eliminator I have ever seen!! I just got it and hooked it up and it rocks. I lost my instructions so I don't know how to setup my wiring for my license plate light. Where could I get another copy of these instructions. Thanks
ANSWER: call Comp Werkes 800 736-2114
QUESTION: stainless is gay, why not black one?
ANSWER: Stainless IS by far the smartest choise of material. If you must have a high maintance option feel free to order someone else's.
QUESTION: What about rear mounted state Tags? Any recommendations on where to mount these?
ANSWER: Competition Werkes only carries one kit per bike. If it won't work for you you'll have to chose a lesser brand.
QUESTION: I reciently puchased this kit from you and the light that I got in my kit was not 4 leds in a row but 1 filiment bulb. since you state in the Q&A that it comes with an led light I'm thinking I got the wrong light and if not why say it was led if it wasn't
ANSWER: Call Competition Werkes. They'll take care of you.
QUESTION: I reciently puchased this kit from you and the light that I got in my kit was not 4 leds in a row but 1 filiment bulb. since you state in the Q&A that it comes with an led light I'm thinking I got the wrong light and if not why say it was led if it wasn't
ANSWER: Call Competition Werkes
QUESTION: Is this fender eliminator kit legal in California?
John
ANSWER: Check your local laws.
QUESTION: For clarification purposes, is the pivotal plate mounted the same as the standard 1000 kit? Or is it mounted closer to the seat position? With respect to the term pivotal, what does this mean exactly?
ANSWER: There is only one kit for the 05 GSXR1000. It mounts at the front of the hugger fender and pivots towards the back as the suspension opperates.
QUESTION: I just bought the fender elimanater for the GXSR 1000 , but light for the tag went out. How can fix the light for the tag? Thank You.
ANSWER: Contact Comp Werkes
QUESTION: Are there any specialty tools that would have to be purchased to complete installation?
ANSWER: no, kit comes complete
QUESTION: what does the plate light look like and is it bright enough to be seen from behind?
ANSWER: It's 4 LED's in a row. It's bright.
QUESTION: Will the plate hit the tail while riding?
ANSWER: Yes, it's designed to roll up the tail, and it folds down as the suspension collapses.
QUESTION: Can I just buy the license plate assembly without the stainless filler piece? I already ordered the Suzuki GSX-R1000 (05) ABS Undertail Filler Piece (Item#S05GS-SB)for $133.88 and I was hoping that I could get a discount on this license plate assembly. Please let me know and thank you so much! You guys have a lot of nice stuff. I just might come back and get more stuff for my bike if I could get a discount on this assembly. Thanks, again!
ANSWER: All special order's must be purchased directly through Competition Werkes.
QUESTION: does the upper plate come in a black finish to match the bike?
ANSWER: no only stainless
QUESTION: Is the metallic looking thing with the six holes the license plate holder?
ANSWER: yes
QUESTION: Is the license mounting plate made of aluminum or stainless? Does the kit come with the plate(shown in picture) to blank off the original fender? Can't tell if it is mounted to the swingarm or the undertail. Can plate be seen from behind bike? There isn't much room in there for a plate. Thanks
ANSWER: Stainless. Comes with everything in photo. Yes it's visible from behind.
QUESTION: Just got the o5 gsxr-1. Would like to know if there is any dirlling involved. Tried to take off the stock undertail and found a cable that runs into that lame looking brake light. what do u do with that? Thank You for your time.
ANSWER: No drilling required. Instructions will explain how to relocate wires (cables)...
Ask your question here:
Your email (so we can send you the answer):
powered by
