Application Chart Diagrams
Application
2004 Honda CBR 1000 RR
Fits Bikes With Stock Exhaust
2005 Honda CBR 1000 RR
Fits Bikes With Stock Exhaust
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: My name is David and I am trying to find just the pivot license plate bracket and the light for it. Do you have any suggestions. Thank you David
ANSWER: it's not available this way.
QUESTION: What if I don't have a lcense plate light?
ANSWER: You'll needto get one from Honda or..???
QUESTION: Will you guys be coming out with a fender eliminator kit for a CBR600RR 2007?? If so, how long? And if not can you refer me to someone that has it. Thanks!
ANSWER: Our Comp Werkes kits should be available by mid April
QUESTION: Will the fender eliminator fit with an Erion Racing slip on exhaust? 2004 100rr. Thanks
ANSWER: YES....GET THE STANDARD AND NOT THE "+" KIT
QUESTION: Will it fit a 05 repsol
ANSWER: yes
QUESTION: Looking for this style for the 2006 1000RR without the signal lights due to the tail light i just purchased, will this be made? when and where can I get it?
ANSWER: Only available through Competition Werkes
QUESTION: Does this kit also work on a 2006 CBR 1000RR with stock exhaust ?
ANSWER: no.......wait a couple weeks
QUESTION: Would this need a resistor to slow the blinker speed as well?
ANSWER: possibly, depending on whats up front...
QUESTION: I have ordered the 2006 CBR1000RR and I was wondering if this will work on the 2006 bike or will I have to wait for awhile for one to come out?
ANSWER: Questionable. The bike has not changed much. But, it has changed. I can not sale this kit for an 06 until I actually do a fittment.
QUESTION: I ordered the race fender eliminator for my CBR 1000RR, I would like to get the one for stock pipes 1H1001. Can I return the other one for the 1H1001 and if so how do I do that?
ANSWER:
QUESTION: Is this legal in CA?
ANSWER: ????????? contact your local DMV
QUESTION: What does DOT stand for? (Is is Department Of Transportation). And how long does it take to ship to North Carolina.
ANSWER: Yes on DOT.....NC one week
QUESTION: I have a 04 Honda CBR 1000 RR with a Micron exhust system on it, with the elimination kit fit and is it available?
ANSWER: Get the 1H1001
QUESTION: is the police gonna harass me ? is it legal in mass ?
ANSWER: Our products are not DOT approved. I believe Mass. has inspections. It's something you'll want to put on after you inspection.
QUESTION: do u sell the flush turn signal lights for the ones in the front of the bike...cbr1000rr 04'
ANSWER: no flush mounts for the front.
QUESTION: for the cbr1000rr, on the tail light it asks if you want clear or amber. are u talking about when the light comes on?... also where is the license plate mounted and do u have photos?
ANSWER: license light is relocated in our kit and illuminates through a small louver. Kit comes with clear lense and an amber bulb.
QUESTION: Hi,
Are both versions (regular and race) of the eliminator kits street legal?
Thanks,
Terry R
ANSWER: Check you local laws, they vary.
QUESTION: I've looked at the picture and see the plate bracket, but I do not see the new turn signals. What do they look like?
ANSWER: They are in the photo's. They are small and well placed so they really don't stand out. They are a arrow-shaped signal black body with a clear lense.
QUESTION: i have the stock exhaust now but later on i might change it will this kit still work with an aftermarket exhaust?
ANSWER: Yes, you'll just have two pieces you'll no longer use.
QUESTION: can i get clear turn signal lenses?
ANSWER: It comes with clear lense
QUESTION: will i still be able to use my stock heat guards
ANSWER: Your stock aluminum heat shield-yes. not the plastic wings.
QUESTION: If i purchase the 1H1001, does Competition Werkes have a front signals kit to match? If so, which would that be. Will they fit existing front signal holes in the middle cowl perfictly?
Thanks,
New 1000RR Rider
ANSWER: Front signal kit #4, specify your bike when you order to insure correct signals.
QUESTION: Do you know if this kit will also fit the '05 1000RR?
ANSWER: Yes it will!
QUESTION: Is there any cutting or drilling involved when installing this product?
ANSWER: NO! no permanent mods.
QUESTION: QUESTION: It looks very good, but will the license plate hit the rear tire if I have a passenger and I hit a large bump in the road?
ANSWER: The kit is designed to retract as the suspension compresses, so NO the plate won't hit the tire.
*What causes the license plate to retract? Linkage, or does the plastic sub fender push it? If this is the case, doesn't it gouge the plastic sub fender?
ANSWER: It has a roller on the bottom of the lic bracket, and a retracting hinged pivot on top. It is a complete kit no flaws! The only down side is if you don't keep your bike clean it will scuff your hugger fender. Some guys are putting a piece of tape on it and removing it when it gets dirty.
QUESTION: Sorry, one more question. Will this kit work with either a Yoshimura RS-5 or Akrapovic after market exhaust? Thanks
ANSWER: Yes, Although the heat guards couldn't be used. Try the 1H1001 and save a little money, if your running after market exhaust.
QUESTION: Do I have an option to get amber colored turn signals instead of clear lenses? Thanks.
ANSWER: Yes, Just specify when ordering.
QUESTION: DO THESE UNDERTAILS COME PAINTED WITH FACTORY COLORS?
ANSWER: It's NOT an undertail! It's a stainless steel fender eliminator.
QUESTION: It looks very good, but will the license plate hit the rear tire if I have a passenger and I hit a large bump in the road?
ANSWER: The kit is designed to retract as the suspension compresses, so NO the plate won't hit the tire.
QUESTION: what are my options for blinkers and licence plate lights do i need them and are they part of the kit. CBR 1000RR
ANSWER: This kit comes w/ signals. It retains the stock lic light.
QUESTION: I need more pictures prior to purchase. Thanks.
ANSWER: Sorry, no more photo's avail.
QUESTION: Do you have more pictures of the Kit on the CBR1000? I want to buy this kit, but I would like to see a couple of close ups.
ANSWER: we hope to get some more up within the next 2-3 weeks. sorry for the wait.
QUESTION: I just ordered the 1H1001 fender liminator kit for my 1000 RR. I want to ensure that its Competition Werkes. How can I do that?
ANSWER: All fender eliminators ordered from 1tail.com are shipped dirrectly from Competition Werkes. The UPS lable will show this.
QUESTION: Will it fit with Canadian licence plates
ANSWER: Every providence has a different size. Should fit QUEB,ONT,SASK,W/O mods
QUESTION: Do you offer the heat guard covers and pivot mounted license plate holder as separate products. I am looking for these two products to purchase.
ANSWER: Not through our dealers
Ask your question here:
Your email (so we can send you the answer):
powered by
