Application Chart Diagrams
Application
1998 Suzuki GSX 600F Katana W
1999 Suzuki GSX 600F Katana X
2000 Suzuki GSX 600F Katana Y
2001 Suzuki GSX 600F Katana K1
2002 Suzuki GSX 600F Katana K2
1998 Suzuki GSX 750F Katana W
1999 Suzuki GSX 750F Katana X
2000 Suzuki GSX 750F Katana Y
2001 Suzuki GSX 750F Katana K1
2002 Suzuki GSX 750F Katana K2
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: I am looking for undertail kit. Can you help me?I not been able to find one. I have a 1999 gsx katana. Thank you for your help.
ANSWER: just this FE kit
QUESTION: Do I have to use the stock light that is on my bike right now or does the kit come with a new license plate light.
ANSWER: uses the stock light
QUESTION: Are both the license plate and the turning signals easily visible if you are standing directly behind the bike.
ANSWER: yes
QUESTION: I have an 99 Katana 750 and I was wondering if this kit comes with a license plate light, and if not, how do you go about installing the kit with the stock light.
ANSWER: retains the stock light within the kit.
QUESTION: i just got my first bike and its a 2000 Suzuki GSX 750 F Katana and im trying to fixit up should i put on a fender eliminater kit or an under tail? what will look beter ?
ANSWER: for the money...... fender eliminator
QUESTION: CAN I PUT 2003 KATANA FENDER ELIMINATOR KIT ON 2000 KATANA
ANSWER: no
QUESTION: I'm looking for a 1990 Suzuki Katana 600 fender eliminator kit. Do you have one to fit this model?
ANSWER: Try 1S600
QUESTION: do they make huggers for katana 01 600? I gone to change the rear fender with a kit. also is any cutting to be made?
ANSWER: You do have to cut the fender with this kit
QUESTION: i bought this kit and was wondering if they make tire huggers for the katana to go with it.
ANSWER:
QUESTION: I can't see any problems fitting the FE kit. I want to order the Comp Werkes FE from yourselves but:
Can you advise about a number plate light and reflective lens which is compulsory in Uk
Many Thanks
Walter
ANSWER: uses stock light..... no reflector provided
QUESTION: Do you get tired of the same fing questions?
;o) Love the kit! It is on my wish list now!
ANSWER: yes
QUESTION: I have a 99 Katana 600. Can this kit fit my bike? And will this change the bumble bee rear end look? If not do you have any suggestion?
ANSWER: It will fit.... It doesn't affect the bodywork, just the rear fender.......no one makes a different tail section for it.
QUESTION: Does this product fit a 1995 katana? If not do you have one that does? Thank you for your help.
ANSWER: no... if you have the 600 try the 1S600, if it's a 750 we have nothing for you.
QUESTION: Can a licenseplate light be added. And how big a license plate can be fittet?
ANSWER: Uses stock lic light. fits a 4"x7" plate, but you should be able to make any size plate work.
QUESTION: where do you cut the stock fender to put on a FE kit and how does the FE kit attatch? do i have to drill any holes? thanks
ANSWER: Cut is flush with the body work. The kit hard mounts to the subframe. The only drilling required is to the black plastic.
QUESTION: In reference to the fender eliminator kit 1s603, does this kit come with the turn signals or do I have to buy them seperate? Also, what is the level of difficulty in installing this kit? Thank you.
ANSWER: It retain the stock signals or after market signals can be added. Give yours self an hour to an hour and a half to install.
QUESTION: why cant i find any good info about my 06 katana 600
ANSWER: 1S604 fits the 03-06....... try looking at for 03 parts.... the bike hasn't changed
QUESTION: i have the '00 katana but my rear tail light doesn't look like the one for this....it looks more like the 600 and 750 Katana Fender Eliminator Kit '03-'06 Item #: 1S604 ....so now i'm confused which one is the right one and i'm sure that i have the 2000 katana 600....any guesses
ANSWER: are you sure you have the stock tail-section.....?
QUESTION: Hello ! my question is about a undertail kit for the suzuki katana 2001 model ! there is almost for all other models but is there any for Katana 2001 ???or any rear kit to change for this type of bike ? please help me ! Thanks Wilson
ANSWER: This kit fits....
QUESTION: What about a 1992 GSX-1100 Katana,Is there a kit for this bike as well?If not what can I use?
ANSWER: Katana????????? Do you mean GSXR1100??
QUESTION: have any better pictures for a 99' katana 750? What other turn signals work with thid kit?
ANSWER: No other photo's. Any short stalk will work.
QUESTION: Im looking for a way to change my bumble bee tail light on my 98 katana 750. Ive questioned dealers if I purchased a newer katana rear plastic if it would fit on my bike, but they weren't much help. any suggestions? Thank you for your time. Joe
ANSWER: Not without major modification
QUESTION: any undertail kits for a 98 katana 600 or anything to get rid of that funny looking tail-light sticking out of the back
ANSWER: This is it
QUESTION: After spending quite a bit of time searching I have
only found two FE kits, and zero undertail kits for my
bike. The FE's did not look the best and required
cutting of the stock fender to install, which is not
something I am willing to do. Do you know of any GOOD
kits for the 01 Katana 600? Undertail preferred, but
FE acceptable.
Sincerely,
Kimball Walker.
ANSWER: Comp Werkes is the best kit. All FE kit and undertails require cutting on this bike.
QUESTION: Are the installtion instructions included?
ANSWER: yes
QUESTION: I HAve A 1996 KATANA WHAT DO YOU RECOMMEND FOR IT ??
ANSWER: Our 1S600 will fit the 96 600, if you have a 750 your out of luck.
QUESTION: Does this fit 96 Kantana 750, Or do you have some in stock
ANSWER: We have never made a kit for the older 750 Katana. Sorry.
QUESTION: Do you have kits for 97 Katanas?
ANSWER: We have kits for the 600 --1S600, but nothing for the 750
QUESTION: Do turn signals come with the kit for the 2002 Katana as shown in the picture, if not how much to purchase? #1S603
ANSWER: The signals in the photo are the stock ones. After market signals will fit also but must be purchased seperately.
QUESTION: are there any cool looking after market parts for 94 katana 750
ANSWER: Not that I've seen.
QUESTION: Hi? do u have the kits ready for the 2004 Katana600? Thanks, also price.
Stephen
ANSWER: Yes, 1S604 $129.95, comes w/ signals
QUESTION: DO YOU HAVE A REAR VIEW OF THIS PRODUCT. I WOULD LIKE TO SEE WHAT IT LOOKS LIKE BEFORE I PURCHASE IT. THANK YOU
ANSWER: NO MORE PHOTO'S
QUESTION: will this kit fit on a 03 Kantana 600
ANSWER: NO. the 03-04 katana kit will be done in about a month.
QUESTION: can you descrbe what comes in the kit? for example is it the whole underside of the fender? do i have to cut anyhting that is already on my bike?
ANSWER: This is a fender eliminator NOT an undertail. The black plastic does get cut, but all cuts are concealed once our kit is installed.The kit also relocates the lic light, turnsignals, and lic plate.
QUESTION: Can the licinse plate be seen from behind cause it looks like the plate is pointing up?
ANSWER: of course
QUESTION: How is the installation of the kit? Easy, hard? Need to be taken to a shop and professionally installed? If it can be done at home, are there instructions included? Also, are there any other parts that need to be purchased in addition (i.e. signals)?
ANSWER: This kit is designed for the average person to install at home, with normal hand tools. Installation should take about 1.5 to 2 hours. This kit relocates the stock turn signals, any others will need to be purchased seperately.
Ask your question here:
Your email (so we can send you the answer):
powered by
