Application Chart Diagrams
Application
2000 Suzuki DRZ 400
OEM: 47
2001 Suzuki DRZ 400
OEM: 47
2002 Suzuki DRZ 400
OEM: 47
2003 Suzuki DRZ 400
OEM: 47
2004 Suzuki DRZ 400
OEM: 47
2005 Suzuki DRZ 400
OEM: 47
2006 Suzuki DRZ 400
OEM: 47
2007 Suzuki DRZ 400
OEM: 47
2008 Suzuki DRZ 400
2007 Suzuki DRZ 400 SM
2008 Suzuki DRZ 400 SM
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: i want to get a 16-39 set up what size chain should i get
ANSWER: for the sm you will need a 112 520 srx will do fine
QUESTION: I've a 08 DRZ 400 SM and I want to improve the torque. Thinking of changing the sprocket but unsure of which way to go to improve the top end. I only ride inner city and rarely hit the freeway so improving the top end is just what I need. Some advice would be greatly appreciated.
ANSWER: 16 tooth front will work wonders.
QUESTION: I have a 2007 DRZ400S. I have upgraded the exhust and rejetted. My top speed is about 85-90 MPH. I will be riding my bike in deep sandy and rocky trails. What combination front/rear and chain would you recommend. Thanks
ANSWER: 14-44 114 links
QUESTION: hi i bought my bike seconhand and i woud like to make shure the size mounts whit it..
-what is the senter hole diameter in mm.
-bolt hole distance from center hole edge mm.
-bolt hole diameter mm.
-bolthole distance between bolthole mm.
i live in thailand but i am using my finnish mastercard and i am using poste restante is that ok with u guys..
and we are talking about item 5028-520
ANSWER: 5028 WILL FIT ALL DRZ 400 WORLD WIDE
QUESTION: I have an 07 DRZ400S and I want to decrease rpm's at higher speeds but still have some torque for off-road use, what is the best sprocket setup?
ANSWER: go to a smaller rear(-2) or a bigger front(+1)
QUESTION: what are the stock teeth front and rear for a 2009 drz 400 sm supermoto. thanks
ANSWER: 15-41
QUESTION: What is your shipped cost for a steel 47 tooth rear sprocket (OEM quality)
ANSWER: we don't make this sprocket in steel
QUESTION: My alum. sprocket is already worn out after 1800 miles. I need to replace it, but can I keep my chain I bought at the same time? What's the best lube for a chain to keep it very loose? (mine will hold a shape)
ANSWER: you should always replace them as a set.
any chain lube(driven,pj1,maxima,motul) is good and better then no lube
stay away from chain wax
QUESTION: I have a 2005 Suzuki DRZ400S which as you know has a 15-44 ratio, I would like to change to a 14-47 ratio for more off-road performance, do I need a new chain? The bike only has 900 miles on it!
ANSWER: yes you will need a 114 link chain
QUESTION: I have a ccm 644 which is a dr650 engine, standard sprocket is 15f - 48r. what would you suggest for more acceleration, off road use only and if new chain would be required. many thanks
ANSWER: 14-48 and you can use your stock chain if its good
QUESTION: The motorcycle shop I am purchasing my DRZ400s (04)from has suggested a 14-46 sprocket change for more acceleration and not too much loss of top end, is this correct, If not what would you suggest. Thank you
ANSWER: yes sounds good its all about ehat you are trying to get try that and make adjustments later if you need
QUESTION: What is the standard factory sprocket setup for a DRZ400s 04 model. I would like more acceleration and a do bit of off road, what would be the ideal setup for that. Thanks
ANSWER: 15-47 WITH 116 LINK CHAIN
QUESTION: if i don't want to change my front sprocket on my drz400s what is a good rear sprocket for highway use
ANSWER: 39
QUESTION: if I change my sprocket to 16-39 for highway use on my drz400s will I need to purchase a new chain
ANSWER: YOU SHOULD YES
QUESTION: I want the perfect combo for going as slow as possible with this bike. I will change the chain if need be. I am content at 2 miles an hour it is for hunting will not be on the streets.
ANSWER: use 13 53 you will need a shorter chain
QUESTION: I have a drz400e that I have 2 sets of wheels for, but both of the rear rims are 18" (not the typical 17" SM rim) with 48 tooth rear sprockets on both of them. Front sprocket is 14. I want to make one set of wheels for highway, one set for trail. How many rear teeth do you recommend for highway with 18" rims? Would I still be able to bump the front sprocket up to 16 teeth?
ANSWER: 16 FRONT 41 REAR FOR THE 18" WHEEL SET
QUESTION: does a counter sprocket of 2000-2006 drz400sm fit on a 2007
ANSWER: YES IT DOES
QUESTION: Hi. I just purchased item 5028-520 in black (39 teeth) and item 1024-520 (16 teeth). Do I need a new chain or do I need to modify my old chain? Please provide item number also in case that I need a new chain. Thank you.
ANSWER: IF YOUR CHAIN IS NEW YOU CAN USE YOUR OLD ONE IF ITS OLD PLEASE REPLACE OT WITH A:
520 SRX 110 LINKS
QUESTION: How am I suppose to order a sproket from you ?
When I go on line and get to the checkout, the screen goes blank. I called your (303) phone no. and spent 34 min. on hold !!!!!!!!!!!
Phil,
ANSWER: Hi, this site is no longer active due to a registrar problem. Please order the parts on www.powersportsfx.com. They are the same and more. We apologize for the confusion.
QUESTION: ok i bought a 13 tooth drive sprocket form you 2 weeks ago i have called sat on hold sent you emails and still cannot get ahold of anyone at this place please contact me on the location of the order number 9189
ANSWER: please call (303) 330-0477 ask for mark
QUESTION: What is the stock sprockets on my 2006 DRZ400S?
ANSWER: 15-44
QUESTION: I have an 07 DRZ400S and ride mostly on the highway. It seems like my RPM's are way too high. What do you recommend for sprockets? I heard that a larger front sprocket will not fit on this bike, is that true?
ANSWER: yes order a 16 front and your problems are solved
QUESTION: im looking for more low end power for tricks but still wanna keep speeds of 65 to 70 without burning the engine what ratio would be best on a drz 400 sm 08
ANSWER: try 15-43 or just change the front to a 14
QUESTION: I have a stock 2001 DRZS. I would like more torque and significantly slower speeds during hunting season. What should I change the rear sprocket to?
ANSWER: 47 will make a diff!
QUESTION: Hi Guys
I ride a 2003 drz400.
My bike is set with 14 front 47 rear sprockets,
What is the best sprocket combinatins for highway /touring use. Will I also need a new chain?
ANSWER: 16-39
QUESTION: I'm trying to order a sprocket but because of security issues i cannot. Also I seem to be having a problem finding your phone number anywhere.Could you tell me what it is so I can finally place this order?
ANSWER: (303) 330-0477
QUESTION: If I order a sprocket for an '07 will I have any problems installing that on a '08 DRZ400SM?
ANSWER: no they are the same
QUESTION: If I order a 39 tooth rear sprocket for my DRZ400SM which is a 2008, would it matter if the sprocket was for an '07?
ANSWER: no they are the same
QUESTION: I want to place an order but your site has a security issue, can I order via telephone ?
ANSWER: yes
QUESTION: I have a 2008 DRZ400SM and I want to drop teeth in my rear stock sprocket so I can cruise at 70mph or so comfortably, in a low rpm. How many teeth do you recommend for the rear to accomplish that?
ANSWER: 39
QUESTION: what is the best number of teeth for a 2002 drz 400e to run a little highway and alot of everyday driving on the roads
ANSWER: 16 TOOTH FRONT
QUESTION: this might seem like a silly question, but I have a standard drz400, and I am looking for more top end speed. what rear sprocket do you recommend.
ANSWER: go down to a 43
QUESTION: yea i do alot of canyon riding on my drz 400sm and i cant seem to keep up with the street bikes? what and how many teeth should my sprocket be in the front and rear? thanks
ANSWER: 16-39
QUESTION: QUESTION: I was thinking about changing my front back to stock and putting a 38 tooth on the back, will that give me ample top end and drop my rpm's? I don't care about wheelies or hole shotting on the street, I actually ride this sucker on the highway, and I think now the rpm's are WAY too high. Is that the answer to my problem?(2007 DRZ400SM)
ANSWER: yes it will 16-39 is the best combo for hwy use
I was the guy that asked this question, and I accidentally deleted your response, could you please give me the price and availability of the 16 and 39 please.
ANSWER: they are both in stock and posted on the site if you can't find it please call customer service.
QUESTION: i want to slow my bike down to use on the farm .i am currently running 15 /50.
can you recomend a ratio for farm and trail riding
ANSWER: 14-48
QUESTION: I was thinking about changing my front back to stock and putting a 38 tooth on the back, will that give me ample top end and drop my rpm's? I don't care about wheelies or hole shotting on the street, I actually ride this sucker on the highway, and I think now the rpm's are WAY too high. Is that the answer to my problem?(2007 DRZ400SM)
ANSWER: yes it will 16-39 is the best combo for hwy use
QUESTION: can i use 14 teeth in front and 53 teeth at Rear on my 350 dr and what other things i need to change ? p.s this is offroad use only
ANSWER: you can just make sure you have enogh clerance
QUESTION: Does DRZ400 48 teeth is a steel sprockets?
ANSWER: NO ITS ALLUMINUM
QUESTION: looking for a 39 tooth rear sprocket for a DRZ400SM, 2007- black in color
ANSWER: in stock part number 5028-520-39bk if you don't see it on this site please call customer service.
DRIVEN RACING
QUESTION: I NEED TO PURCHASE CHAIN,SPROCKET REAR & FRONT DO U HAVE THEM IN STOCK,
SUZUKI DRZ 400S
MODEL 2000
ANSWER: yes we do rear is 5028-520- number of teeth chain is the mrd-6 and front is a 1024-520-number of teeth or call customer service 720-891-4907.
DRIVEN RACING
QUESTION: Dose this sprocket come in the gold color?
ANSWER: YES IT DOES GO TO WWW.DRIVENRACING.COM TO SEE THE COLOR
driven racing
Ask your question here:
Your email (so we can send you the answer):
powered by
