Ducati 748/916/996 Rearsets w/shift pedal
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly.
Moves pegs forward 1/2" and up either 0" or 1/2"
Works for standard or GP shift!!
Item no. 05-0610
Retail: $269.99(PLUS shipping)
Today$264.88
Application Chart Diagrams
Application
1999 Ducati 748
2000 Ducati 748
2001 Ducati 748
1994 Ducati 916
1995 Ducati 916
1996 Ducati 916
1997 Ducati 916
1998 Ducati 916
1999 Ducati 916
2000 Ducati 916
2001 Ducati 916
2002 Ducati 916
2000 Ducati 996
2001 Ducati 996
2002 Ducati 996
2003 Ducati 996
These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.
Why buy a BRAKE PRESSURE SWITCH ASSY? Coarse or Fine?
These universal switches allow rearset users to operate the rear brake light. This all-in-one unit replaces the banjo bolt that connects the rear master cylinder to the rear brake line. You simply replace the bolt with this assembly and splice the wires into your existing brake light switch. The pressure inside your brake system then activates the brake light.
This part is a MUST HAVE item if you are going to ride your Woodcraft Race Rearset equipped bike on the street. Woodcraft Race Rearsets do NOT have a mount for your brake light switch linkage. This switch comes with a replacement banjo bolt and a pressure sensor switch that senses when pressure is applied, and triggers your brake light. The thread pitch can vary between different bikes IN THE SAME MODEL YEAR. Please make certain which thread pitch your specific bike has before ordering.
NO RETURN OR REFUND ON THIS ITEM!
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Just to confirm does the above $265 set come with a shift pedal as pictured? or do I have to use my current oem shift pedal?
ANSWER: Yes, it comes with a pedal
QUESTION: I need rearsets for my 05 999 any progress yet???
ANSWER: No not yet. Stay tuned.
QUESTION: hi there. $264.88 is the price for the rearsets. correct?. is that fit the 748-996-998 ducatis
is it for the copmlete set?
ANSWER: The rear set 05-0610 fits the following: Ducati 748/916/996 series. It comes with our 3 piece shit pedal.
QUESTION: how much the complete set of the rearsets for 996R?.
ANSWER: $339.99 and they are in stock.
QUESTION: i need a nice rear set to replace the ones i have for 996R. those looking good. did they fit on my bike?
ANSWER: Yes, they will
QUESTION: Looking to use these rearsets on a road going 748, do they take the brake light switch?
ANSWER: They will need an aftermarket brake light switch to replace your stock set up. We offer a pressure sensitive set up and would simply need to know if your rear brake master cylinder(make/model/yr)requires a coarse or fine thread banjo bolt.
QUESTION: I too need rearsets for my 05 999r. I like your stuff. HELP!
ANSWER: We are looking at doing this model later this season (2005). Thanks for the feedback, we appreciate it.
QUESTION: I,m looking for rearsets and fairing stay for an 05 999r. Got anything that will work. I've used your products on other race bikes and like the quality.
ANSWER: We have not made anything for the 999 yet. It is likely that we will start producing them this spring.
QUESTION: 1) Can you tell me what the rise up and back for these rearsets is please.
2) Is there a matching brake pedal ?
ANSWER: These were developed using the WSB & AMA pros and consulting with Ducati Corse....they have 2 options; either up 0 (stock) or up 1/2" and they move the pegs forward about 1/2 inch. The bike needs more wieght up front and moving the pegs forward really helps this.
There will be a matching brake pedal available in 2-3 weeks (would you belive we just started making it?). We just finished testing the prototype this morning. The price should be $74.99.
Ask your question here:
Your email (so we can send you the answer):
powered by
