Application Chart Diagrams
Application
2001 Suzuki GSX-R 1000 (K1)
LH side modification only
2002 Suzuki GSX-R 1000 (K2)
LH side modification only
2003 Suzuki GSX-R 1000 (K3)
NO modification required
2004 Suzuki GSX-R 1000 (K4)
NO modification required
2005 Suzuki GSX-R 1000 (K5)
NO modification required
2006 Suzuki GSX-R 1000 (K6)
NO modification required
2001 Suzuki GSX-R 600 (K1)
LH side modification only
2002 Suzuki GSX-R 600 (K2)
LH side modification only
2003 Suzuki GSX-R 600 (K3)
LH side modification only
2004 Suzuki GSX-R 600 (K4)
NO modification required
2005 Suzuki GSX-R 600 (K5)
NO modification required
2000 Suzuki GSX-R 750 (y)
LH side modification only
2001 Suzuki GSX-R 750 (K1)
LH side modification only
2002 Suzuki GSX-R 750 (K2)
LH side modification only
2003 Suzuki GSX-R 750 (K3)
LH side modification only
2004 Suzuki GSX-R 750 (K4)
NO modification required
2005 Suzuki GSX-R 750 (K5)
NO modification required
Woodcraft frame sliders stand out in a market crowded with look-alike options. Our patent pending design features a universal slider puck that fits nearly all slider models. What makes the Woodcraft design unique is the perpendicular attachment bolt for the puck. Because we do not have to hollow out the center of the puck, we can leave the sliding surface of the puck solid. This provides 48% more plastic to slide on, dramatically improving puck life. The side mount also eliminates the hassle of trying to dig out a puck replacement bolt through a distorted hole.
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: What about the k7 gsxr 1000? Do you make slider for it?
ANSWER: Yes, they are in stock, part number 50-0249, same price.
QUESTION: Do I have to cut the my 2002 GSX-R 600 to get these to fit, or do they just bolt on
ANSWER: There is some partial cutting required on one side....that way the sliders are as strong as possible.
QUESTION: do you have gsxr 1000 2001 frame sliders and if so how much. NO CUT!!!
My bike is blue and white. Do you have blue white or black or chrome?
ANSWER: On your bike, you must trim the bodywork on the left side. We have Blue, Black and Chrome slider tops.
QUESTION: is there any modification required for 05 gsxr600 frame sliders and if not where do they bolt on?
ANSWER: There is no cutting on this model.
QUESTION: Are these available for GSXR 1000 /06'? Not interested in aluminum, plastic only. Would prefer white if available.
ANSWER: Yes, this is the kit for your bike
QUESTION: today is april 15, 2006. are there ay frame slider for the 06 gsxr- 600?if so, do they bolt on or is there cutting involved? thanks!
ANSWER: Yes, they are available. Cutting is involved, as we will only make sliders that will hold up and have never found an offset slider that does an adequate job.
QUESTION: I have a gsxr600 03', how easy is installation, I want to put on the red anodized aluminum sliders. Is it as easy as screwing them into the frame, or am I going tohave to perform surgery? Thanks in advance!
ANSWER: Installation is easy. You will have to partially cut the bodywork on the left side for clearance.
QUESTION: Does a 2000 GSX-R 750 need any fairing modification to fit these frame sliders?
ANSWER: The left side needs some trimming, the right side is clear.
QUESTION: I have a 2006 gsxr 600 and was wondering if you had to do any mods to install the frame sliders(cutting)?
ANSWER: Yes, but this part number (50-0240)is not the correct one for your bike. The new 06 GSXR600/750 takes part number 50-0247. As far as the cutting, they do require it. We do not believe in making something that does not work, and offset sliders can cause more damage than they prevent at times.....so we avoid them whenever possible.
QUESTION: Frame sliders for 06 suzuki gsxr600????Do you have them?
ANSWER: They will arrive before the end of the week. (before April)
QUESTION: IS THERE ANY NEWS ON WHEN THE LOWERING LINK AND THE FRAME SLIDERS WILL BE OUT FOR THE 06 GSX-R 600??? THANX FOR ANY HELP!!!
ANSWER: The slider for the 06 GSXR's will be out very soon. (03-20-06)
QUESTION: Will these sliders fit for the new 2006 GSXR750 and if so, are they easy to install.
ANSWER: No, they will not fit the new bike (they will be reay very soon), and they are very easy to install.
QUESTION: do you have any info yet if these will fit an 06 gsxr600?
ANSWER: We are working on it. Pls. stay tuned to our website woodcraft-cfm.com to see when they will be released. We are quite sure we will have to design new ones along with rear sets and engine covers.
QUESTION: Hello, just checking back to see if these sliders will fit a 06 GSX-R600. Thank you
ANSWER: We are presently awaiting a new '06 model bike so we can determine if the current frame sliders will fit or not. Our guess is new ones will have to be designed. Stay tuned..
QUESTION: IS FAIRING MODIFICATION REQUIRED TO PUT FRAME SLIDERS ON A 2003 GSXR-750
ANSWER: Yes, but only a small bit of clearancing on one side - no holes to cut
QUESTION: how long are the frame sliders for 2005 gsxr 1000
ANSWER: They stick out about 30mm past the bodywork.
QUESTION: Are there any modifications needed for the 2005 gsxr 1000 and what is the longest I can get o wouldn’t the aluminum sliders be bad if the bike hits the ground and would they slide or catch on the ground
ANSWER: There are no mods needed for the 05 GSXR1000. The sliders are all set up to protrude about 30mm. This is to provide frame and some bodywork protection without giving the bike a big lever to break your frame of cylinder head with. The alminum sliders will slide - but there is a little less impact absorption than with the plastic sliders, which also slide a little better. Although they do work, the aluminum pucks are mainly made for thier good looks.
QUESTION: Hello, just wondering if your list with the 2006 GSXR's is accurate. I would like to purchase some sliders for a 2006 GSX-R600, but the bike isn't in until March. I will purchase them now if I know they will fit the bike when I get it. Thanks
ANSWER: We cannot confirm 2006 fitment just yet. We need for the bike to be released as well and will have them almost right away after they hit the showroom.
QUESTION: is there any modifications needed to mount frame sliders on an '03 suzuki gsxr 600?
ANSWER: The left hand side will need to be cut.
QUESTION: i have a 2001 tl1000r i have had no luck finding fram sliders that are no cut,they say no cutting but when i try to put them on i have to cut the fairing,i have a 2k paint job and cutting is not the way i wont to go.
ANSWER: We do not offer frame sliders for the TL series and are not sure who does, sorry.
QUESTION: Are the sliders no modification for 2001 gsxr 750 ?
ANSWER: You will need to modify the left hand side.
QUESTION: is fairing cutting required on a 2004 gsxr 1000?
ANSWER: No there is no cutting required.
QUESTION: i see only red anodized pucks i want it in blue if you have it please let me know is for my 2005 -gsx-r1000. my cel phone is 1-787-397-4451.
ANSWER: Blue pucks should be available at the end of June.
QUESTION: Will the 2005 GSXR 1000 require cutting of the fairing to mount these sliders? I noticed that the dealer part numbers for the 2005 sliders is different than the 2004 sliders, that is why I ask.
ANSWER: On the 2005 GSXR1000, there is slight cutting on one side....not too bad.
QUESTION: Are any modifications needed to mount the frame sliders for the '05 GSXR 750?
ANSWER: No, there are not...they should clear the bodywork without cutting.
QUESTION: Can you tell me which, if any frame sliders will fit my 2003 Suzuki Bandit 600S(GSF600S).Also can you tell me what steering dampener kit will fit this same motorcycle.
ANSWER: I'm sorry, but we do not have sliders or a damper for your particular motorcycle.
QUESTION: Do I have to do any modification to my 04 GSX-R 600 to add the Frame Sliders
ANSWER: These sliders bolt on with no modifications at all. Thanks
QUESTION: for the gsxr750/2004 are there modifications needed to mount the frame sliders??
ANSWER: No, on the 2004 bikes they bolt on with no modifications. Thanks
QUESTION: for a gsxr 1000 \ 2001 are there modifications needed to mount the frame sliders?? josh
ANSWER: Yes, I beleive that you need to trim the bodywork on one side.
QUESTION: do you carry carbon fiber frame sliders for a gsxr 1000 04?
ANSWER: No, we have the high density plastic right now. In 1 week we will have polished aluminum and in 2-3 weeks we will have red and blue anodized aluminum.
QUESTION: Will the frame sliders made for the 04 gsxr 600 fit an 05 gsxr 600? Do you have bar ends and swing arm sliders and will they fit an 05 gsxr 600?
ANSWER: No one has seen a 2005 GSXR yet so we cannot say one way or the other. We have had a few requests for swing arm sliders but do not have plans to make them to date. We do not offer bar ends other than the aftermarket delrin molded bar plug ends that fit our clipon bar tubes. They are press fit into a 5/8" diameter hole and cost $2.00 a piece. Jan - customer service
QUESTION: do you have all metal extemded frame sliders in silver or black for a 04' GSXR 1000
ANSWER: The item no. referenced should be 05-0240. We are currently designing aluminum top (puck) frame sliders that will be anodized different colors. They will be for street application and not recommended for road racing use. Stay tuned. Jan - Customer Service
QUESTION: Do you have any frame sliders for a GSXR 600 (year 2000)- all I saw was for the 01-04 models??
ANSWER: Yes, the same part number fits the older model GSXR's.....Suzuki is great that way.
QUESTION: Do you carry frame sliders for a 99 gsxr 750, how much?
ANSWER: Yes, they are part number 50-0200 and cost $67.99.
QUESTION: do the frame sliders come in pairs
ANSWER: Yes, they come in pairs
QUESTION: Is fairing modification required with this product on an 04 GSX-R 600
ANSWER: No, they bolt on with no fairing modifications
QUESTION: do you carry the frame sliders that light up in different colors for the Suzuki GXR 600?
ANSWER: No, we do not have those......ours are designed to be the best ones from a fucntion standpoint. We have not done any lighted ones.
Ask your question here:
Your email (so we can send you the answer):
powered by
