GSXR 600, 750, 1000 Fender Eliminator Kit
Fits:
This item usually takes about 1 to 2 days to ship
Item no. 1S754
Retail: $139.95(PLUS shipping)
Today$131.95
Application Chart Diagrams
Application
2001 Suzuki GSX-R 1000 (K1)
2002 Suzuki GSX-R 1000 (K2)
2001 Suzuki GSX-R 600 (K1)
2002 Suzuki GSX-R 600 (K2)
2003 Suzuki GSX-R 600 (K3)
2000 Suzuki GSX-R 750 (y)
2001 Suzuki GSX-R 750 (K1)
2002 Suzuki GSX-R 750 (K2)
2003 Suzuki GSX-R 750 (K3)
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Do you have a fender eliminator kit with turn signals for a 1999 gsxr 750? If so how much?
ANSWER: no
QUESTION: I have a 2002 GSXR 600 with a hotbodies racing undertail with integrated blinkers. But base regs need the lights to be at least 6" apart and not integrated. Will this work on my bike?
ANSWER: Yes.... but not in conjuction with Hotbodies tail
QUESTION: Will this fit on a stock 2002 gsxr 600 with no drilling or cutting?
ANSWER: There would be drilling and cutting to the black plastic.
QUESTION: my bike has an under tail and I need signal lights,is this the best way to go.
ANSWER: No... get some flushmounts
QUESTION: Do you have any kits for a 1990 GSXR?
fender eliminators?
Also, what model & year fairings
will fit on an 1990 GSXR to give it a newer look?
ANSWER: sorry
QUESTION: im looking for instructions to install a 2003 gsxr 750 competition werkes fender eliminator kit, do you know where i can find them?
ANSWER: contact comp wertkes
QUESTION:
Do you have a fender eliminator kit for a Suzuki katana 1999?
ANSWER: Yes, part# 1S603
QUESTION: i have a 2001 gsxr 600. With this kit, will I lose storage space? Also, will there be cutting involved.
ANSWER: You will need to cut the black plastic fender..... You'll only lose about 10% of your storage
QUESTION: Do you have any fender eliminator kits avail for a 06 GSXR 750?
ANSWER: Were Starting that kit Monday, it should hopefully be done and up for sale on friday the 14th. You might check the New Bikes section of our website on friday to see if its done.
QUESTION: I have a gsxr750 2001 and was wondering if you had an eliminater kit that had flush mounted turn signals with pictures?
ANSWER: No. Your best bet is this kit. Just leave the signal brackets off, and either use Flush V's or the Assimilator.
QUESTION: Do you have a elimanator kit with tail lights incorporated into the break light? And will this take away the storage compartment?
ANSWER: we sell the integrated tail lights seperate from our kits, they run $89.95.
QUESTION: Will the competition werks fender eliminator for a 2005 gsxr1000 work on a 2006 gsxr1000?
ANSWER: yes 05 and 06 are the same.
QUESTION: When will a 2005 GSXR 1000 kit be available?
ANSWER: It is, photo at www.competitionwerkes.com
QUESTION: on an 01 gsxr 600 do you have to cut off the hooks for the bunge cords and can you e mail the directions so i can see the difficulty of installation.
ANSWER: Cutting of the hooks is optional. Sorry against policy to email instructions.
QUESTION: Which kit should i get to eliminate that back plastic piece that holds my license plate for a 03 suzuki 2003 limited edition GSXR600?
ANSWER: This one the 1S754.
QUESTION: Do you have to cut anything to install on a 2001 750, If cuts need to be done what does one need to cut?
Thank you
Frank
ANSWER: Yes, you'll have to cut the black plastic flush to the body.
QUESTION: do the kits come with mounting instructions?
ANSWER: yes
QUESTION: Do you have a kit that will fit a 2003 GSXR-600 Limited Edition model and does it require any cutting?
ANSWER: ltd kit is no longer available. all kits for this bike will require cutting.
QUESTION: do you have a kit for a suzuki 2001 gsxr 750 w/ smaller turn signials under the fender not sticking out to the side? If so...can you send me a picture to view?
ANSWER: No photos. But you can purchase signals to fit on this kit.
QUESTION: I have a 2001 gsxr750 and I'm looking for a fender eliminator with the turn signal built under the brake light. I want to get away from the turn signals sticking out from the bike. Do you have any?
ANSWER: You can use our eliminator and our Assimilator. This would put your signals in your tail light.
QUESTION: If I add one of your undertails to my 03 GSXR750 will I loose my trunk space. Also I would like to see a picture of your fancy license plate holder from the back; does that scrap the ground when you lean hard on a turn. I would like to get some custom turn signals (front & back). Does the undertail come already painted to match the blue & white 03 that I have.
ANSWER: You will lose about 10% of your storage. Yes, you could scrape our kit, but not before you scraped everything else on your bike! After market signals will fit on this kit. I believe the first line of the discription explains our FENDER ELIMINATORS are STAINLESS no need for high maintanace paint.
QUESTION: do you have a kit like this for the 2004 suzuki gsx-r 600. i would like to use my stock turn signals and license mount. also this product is selling for $129.95, if we use stock license mounts and turn signals, what are we buying?
ANSWER: We only make one style for each bike.
QUESTION: Since the LTD Kit for 2003 GSXR-600 Limited Edition has been discontinued what other kit could I use instead?
ANSWER: The standard kit. You can also use the "Assimilator" to get rid of your turnsignals.
QUESTION: will it fit my 2000 gsxr 600? Will it need any cuttings? Got any pics for it?
ANSWER: You need the 1S753 there will be some cutting.
QUESTION: i have a 02 gsxr 750. does the kit completely do away with the black plastic or do you just cut out a portion of the plastic. can you send me a picture of the back and underside so i can see exactly what it will look like. thanks.
ANSWER: You do have to cut your plastic. Sorry, this is the only photo we have.
QUESTION: I own a 2002 suzuki GSXR 600 and already have the fender eliminator kit installed. I really like the design for the 2004 kit with flush turn signals. Is there any kit available for the 02gsxr that resembles the kit for the 04 gsxr? If not can I purchase the 04 eliminator kit and try to custom fit it to my bike? Thanks, Mike
ANSWER: Sorry, No!
QUESTION: does the 2003 gsxr 600 kit require cutting?
ANSWER: Yes, but only to the black plastic. Not the bodywork, or frame.
QUESTION: Do you have a kit for 2003 GSXR-600 limited edition model and does it require any cutting?
ANSWER: LTD kit has been discontinued.
QUESTION: (sorry if this is a repeat question, Computer went down when I sent this last time) Does the kit for a 2001 GSXR-600 require any cutting?
ANSWER: Yes, the black plastic gets cut flush to the bodywork.
QUESTION: I have a 2004 GSXR 1000, do you have a fender eliminator kit for it?
ANSWER: 1S1003 or 1S1003S it should be on the site.
QUESTION: Could you please Send me a picture of the Fender Eliminator Kit for the 2004 GSXR 600 Part # 1S755
ANSWER: It's on our web site.
QUESTION: do you have any kits for the suzuki 2004 gsxr 600 ?
ANSWER: Yes, Part# 1S755 Fits the 04 GSXR 750/600
Ask your question here:
Your email (so we can send you the answer):
powered by
