Application Chart Diagrams
Application
2004 Honda CBR 1000 RR
2005 Honda CBR 1000 RR
2007 Honda CBR 1000 RR
2004 Honda CBR 600 RR
2005 Honda CBR 600 RR
2006 Honda CBR 600 RR
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Picture of kit is fitted to a bike with the shock reservoir mounted across the bike. My bike (CBR100RR 07) has the shock reservoir mounted length ways will this kit still fit and not hit the shock reservoir during suspension travel
ANSWER: yes, i own that bike. fits fine
QUESTION: which one would need to be ordered for the 07 1000rr ?? i see your chart is split between 04-05 1000rr but no 07??
ANSWER: this kit fits all year 600rr's from 03-06 and all year 1000rrs from 04-07.
QUESTION: I just order the kit for my 2007 cbr 1000. how long will this bulb last and how do i get new bulb if the one burns out.
ANSWER: we offer replacement bulbs... they last 3 times LONGER than halogen bulbs.
QUESTION: Do I need to have any of the old pieces from the OEM fender for this kit to work on my 05 600RR?
Or is it a direct fit and attaches somewhere on the bike?
ANSWER: NO, YOU DONT NEED THE ORIGINAL STUFF.
QUESTION: Item no. HRRSS. Will this fit on a Honda cbr 1000 rr, and can I get this item without the turn signals? If so how much?
ANSWER: YES IT IS AVAILABLE WITHOUT THE TURN SIGNALS PART # HRRSSNOTS
QUESTION: I have the 2006 600RR.. I know it says this kit will fit the bike, but under model it only goes to 600RR 05'. So do I just click on the 05' model and it will fit the 06'?!
ANSWER: yes it will fit the 2006
QUESTION: will this fit the 07 600rr?
ANSWER: no, there is a kit for that bike up. model number is h07600rrrace
QUESTION: do you ship these items to Australia?
ANSWER: yes
QUESTION: I bought this item about 5mo. ago my plate light has since stopped working.I would like to know what is the process to get another plate light for mu 1tail, Thx, Adam
ANSWER: please send an email to MACBLASTR@AOL.COM with replacement tag light in the subject line and please put your order number, name, address, and phone number in the email
QUESTION: When mounting the in line resistors should i connect them before the connection to the bike? Will this reduce the load so to speak to keep them cool?
ANSWER: make sure you mount them away from plastic, as they do get hot. but the connection makes no difference.
QUESTION: Will the kit fit the 2006 1000rr?
ANSWER: yes
QUESTION: THE IN-LINE RESISTORS RED WIRE NEEDS TO BE CONNECTED TO THE RED WIRE OF THE LED. THE BLACK WIRE OF THE RESISTOR NEEDS TO BE CONNECTED TO THE GREEN WIRE OF THE BIKE WIRE OR THE ORANGE AND BLUE WIRE FROM THE BIKE? COULD YOU CLARIFY OR SEND A GOOD WIRING DIAGRAM. THANKS FROM THE ELECTRICALLY STUPID.
ANSWER: the red goes to the red of the led and then gets hooked to the bike and the black goes with the black of the led and then gets hooked to the bike. The electrical term is called "wired in parallel"
QUESTION: What's the difference between the race LED fender eliminator kit and the
SS LED fender eliminator kit? I'd like to install one of the two on a 05 Honda cbr
1000RR. From what I can tell from the photos is that the race LED turn signals
are above and to the side of the plate# as a one unit piece.
Now for the SS, are the turn signals attached to the plate as in a one unit piece or
are these LED's separate from the plate frame and utilizing the original turn signal
brackets?
ANSWER: the tutn signals on both the race and the SS kit are part of the bracket. The SS kit positions the tag in front of the rear tire and requires drilling. The race kit utilizes the bolt hols on either side of the exhaust pipe and positions the further forward than the stock location.
QUESTION: will this fit a 2006 600 rr?
ANSWER: yes.
QUESTION: will the relocation of the lic plate have any effect on clearance of the rear tire when encountering bumps
ANSWER: nope, the kit places the license plate far enough forward to where there is absolutely no interference
QUESTION: Will this kit work fine w/ a Micron Slip on Exhaust on a 2005 RR?
ANSWER: YES!
QUESTION: Does the SS LED FENDER ELIMINATOR KIT fit the Micron Slip On Exhaust Twin Outlet Stainless Steel for 2005 Honda CBR1000rr
ANSWER: if the stock assembly fits over the pipe, our fendereliminator kit will fit.
QUESTION: You have it mounted far back. Is that were the instructions tell you to mount it? Because if you go to there website they show it mounted right below the tip of the exhaust.
ANSWER: the ss kit mounts in front of the tire, the race kit mounts under the exhaust.
QUESTION: Do we have to cut anything to install this kit
ANSWER: no, you have to drill a couple holes.
QUESTION: What do most people do with the veh. inspection sticker after getting rid of the factory fender? Any recommendations?
ANSWER: you would have to check with your local officials in your area, we do not have inspections where we live in florida
QUESTION: If the lights burn out , are they replaceable through your company, or do i have to find an alternative? does it hit the tire ? is there a warranty, guarantee, or anyhting like that?
ANSWER: we do offer a warrenty for our product for one year and the kit will not hit the tire ans the leds are replaceable thanks oliver
QUESTION: will this kit work with a Two Brothers C2 slip on? I have an 2005 600RR.
ANSWER: yes this kit will fit perfect thanks oliver
QUESTION: Does this kit fit a aftermarket yoshi rs-5 slip on? My bike being the 2005 1000rr.
ANSWER: yes we have a bike with the same exhaust thanks oliver
QUESTION: can i get this product w/out the signals?
ANSWER: Yes you can order the kit with out turn signals. If you have any more questions please call 321-459-0606 Mon-Fri 9am-5pm EST. Thank You, Brett
QUESTION: Does this come with instalation instructions and removal of old one? What is the skill level?
ANSWER: yes this kit will come with instructions and this is not a difficult kit to install we also offer a tech line to help thanks oliver
QUESTION: The kit looks like it is plastic. What type of material is it made of?
ANSWER: ABS Plastic - same kind of plastic that is used to make the STOCK FENDER and all of the other plastics on your bike, as well as used on cars.
QUESTION: Whats the difference in the black case and the chrome case? Like what part is colored?
ANSWER: JUST THE CASE IS CHROME AND BLACK
Ask your question here:
Your email (so we can send you the answer):
powered by
