WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: I have a 2007 zx600 which pegs will fit the rear
ANSWER: Part # is 2GPK2-"color"
QUESTION: Additional info needed 2008 Ninja 250 driver footpegs.
I would like them in Black... no selection avaialable for this model.
ANSWER: don't know.....sorry
QUESTION: I have a 1994 Kawasaki Vulcan EN 500-A5 will any of these pegs fit
ANSWER: ?????????????????
QUESTION: Looking for footpegs for the 2008 250R Kawasaki ninja. Please advise what you have available. Thank you
Mel Tatsumi
ANSWER: should be...1GPK-Color
QUESTION: hi there,do you guys post to australia,if so what payments do you do?
thanks steve
ANSWER:
QUESTION: Can you tell me which ones i would buy for a 2007 ex500
ANSWER: No idea....
QUESTION: Hi there, do they fit an 07 er6-n?
ANSWER: Sorry, I have no idea what bike that is.....
QUESTION: i have a 06 kawasaki ninja 636 . will the zx6r 95-07 red fit my bike? my bike has the same foot pegs that came on it when i bought it new.if so, can these replace my others? with out any other parts? i want to put red driver and passenger pegs on.
ANSWER: all fronts are the same...... rear you'll need 2GPK2-R for red. These are the same as the ZX10, ZX12
QUESTION: i have the 07 zx6r and im looking for front and rear pegs in black where can i find them and what years have the same front and back as mine
ANSWER: currently out of stock in black..... basically any 05 or newer ZX10/6 uses the same pegs
QUESTION: will they fit an '04 Concours?
ANSWER: ??????????????no idea??????????????
QUESTION: Will the front and rear foot pegs fit a 2007 ZZR600?
ANSWER: Yes, they're the same as the 98 ZX6
QUESTION: Will these fit a ZX600 '86? If not can you suggest any other black footpegs? Thank you. Great site.
ANSWER: Probably...... but not possitive. You might try the knock off brand "Pro Bolt"
QUESTION: In the questions it says that you don't believe it will fit the ninja 250r. The ex250r is a ninja 250r.
Will it fit the 2007 ex250r?
ANSWER: Kawasaki seemed to change the signals and footpegs on the 06 and newer 250.......... nothing else.... not sure why.
QUESTION: I have a 97 600zx. Do you have foot pegs for this year and model?
ANSWER: yes... all front Kawas are the same
QUESTION: which ones will fit the 07 zx6r?
ANSWER: All Kawasakis are the same up front
QUESTION: will the 03 zx6r pegs fit 06 zx6rr
ANSWER: yes
QUESTION: Hello, I'm looking for pegs for my 2005 z750s, will these fit? Also is the set up the same as any other kaw models? I'm having a really hard time finding any type of selection. Thanks
ANSWER: Every Kawasaki I know of runs the same front pegs..... Have not actually fitted a z750 but my guess is they'd fit.
QUESTION: DO these fit a zx10r 2006????
ANSWER: yes
QUESTION: i have a 93 kaw.zx7 i need to know what products you carry for this and is there a difference in the zx7r and what it is thank you
ANSWER: Footpegs, fender eliminator........ZX7 and ZX7r were the same in 93
QUESTION: will the 05 ex500 fit the 06 ex500
ANSWER: yes
QUESTION: will the 04 zx10 pegs fit the 05 zx10?
ANSWER: yes
QUESTION: which frame sliders do I use for a zx-10r 05?
ANSWER:
QUESTION: i want to order front and rear pegs for a zx14,they are not listedso which ones do i order
thanks
ANSWER: Same as the ZX10
QUESTION: will these gp riderpegs fit my 1991 kawasaki 600C ninja
ANSWER: Yes
QUESTION: i was looking on your site... and i noticed alot of parts but i wanted to know if you had a pair of passenger pegs for a '93 kawasaki zx750-m cause i didn't that listing or any interchangeable part that could subsitute?
ANSWER: yes all older rear Kawasaki pegs are the same....
QUESTION: Hi there ,I need 2 pairs front and rear foopegs blue colour for my 636 2005.Do you guys have them >
ANSWER: Yes
QUESTION: I believe 1986 ZX600 use the same pegs as the 1987 ZX600. ou show pegs from1987 to 1997. Will the pegs fit a 1986.
ANSWER: Should yes
QUESTION: Will these and the passanger pegs fit a 2006 ZX14?
ANSWER: yes
QUESTION: Will any of these pegs fit the new 2006 EX650 Ninja?
ANSWER: Front should....have not done a fittment though
QUESTION: do you have a pic of the 2002 zx6r foot peg?
ANSWER: All the gegs look the same the difference is in the mount.
QUESTION: which rider foot pegs will fit the 06' kawi zx 636?
ANSWER: any zx6 front
QUESTION: do they fit 2005 zx6r 636
ANSWER: yes
QUESTION: OK, I wanna order a set of rider pegs for my 2006 kawsaki 636. When I order, do I need to put 2 in the How many block? Or just 1?
ANSWER: Do you have two bikes or one?
QUESTION: i have a 01 6zr is there a difference on the front and rear pegs
ANSWER: Yes the front and rear pegs are different. but we have this style for both.
QUESTION: how about a 2005 ZZR1200C4?
ANSWER: yes
QUESTION: aloha!why is it so hard to get parts for my zx900a,will this peg's fit her>?...mahalo(thank you)
ANSWER: Not much made for it...... but these pegs will work.
QUESTION: Do you have rear passanger foot pegs for 2002 Ninja Zx12 R in silver ?? Will they mount over a costum exhaust bracket with two allen screws??
ANSWER: they are stock replacement (need stock mounts)
QUESTION: do you have many parts for my 06 250 ninja
ANSWER: should be the same as the previous 250's
QUESTION: do these fit a 2006 zx 10r
ANSWER: ????????? we have NOT had a chance to do a fittment yet as of 2-10-06......
QUESTION: I don't see my bike. A 98 zx6e! Do you carry for my model?
ANSWER: All older Kawi's are the same
QUESTION: will the rider and passenger footpegs fit on the Kawasaki 250R?
ANSWER: Sorry I don't believe so.
QUESTION: will these pegs fit on a 2006 zzr600?
ANSWER: yes
QUESTION: Do you have the mounts that the footpegs sit on. The foot peg "stay" to mount the peg itself on?
ANSWER: No
QUESTION: I have just bought a 1999 Kawasaki ZX7R. The bike has a high mount exauhst. Do you make a pasenger foot peg that can be mounted without conflicting the pipe.
ANSWER: These mount in the stock location.
QUESTION: i have 04 zx10r.. i want the blue pegs, which would i check to get these pegs for my bike??
ANSWER:
QUESTION: Where are the pics?
ANSWER: competitionwerkes.com
QUESTION: I have a 05 zx6r, will the 03 foot pegs work on my bike?
ANSWER: yes
QUESTION: Are they priced in pairs?
ANSWER: yes one for each side
QUESTION: i have a 04 zx10 just wondering do you have a set off footpegs that will fit my bike?
ANSWER: Yes
QUESTION: I have a '03 Kawasaki ZX6RR, and I'm looking to purchus one of your foot pegs. I've noticed in your options you provide that the foot pegs designed for ZX6R has a range from '95-'03. My question is if the pegs work on the 03's, shouldn't it work for the 04's too since 03's and 04's are practically the same thing?
ANSWER: yes, the site just needs to be updated.
Ask your question here:
Your email (so we can send you the answer):
powered by
