|
| PIG SPOTTER MIRRORS: UNIVERSAL |
Sold in Pairs
These are universal and ALL come with built-in LED turn signals!
Your Choice of BLACK, CHROME, KAWASAKI GREEN and TRANSLUCENT BLUE
Exceptions: Requires block-off plates and new mounting location for:
Kawasaki ZX14
Honda 929 or 954 |
| |
| This item usually takes about 4 days to ship |
| |
| Item no. STPS2 |
| Retail: $99.99(PLUS shipping) |
| Today$97.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: With the black mirrors, do that stay lit up like the translucent blue, or the only light is the turn signal? |
| ANSWER: Black is solid black. The only lighting is the four LEDs that are usually used as turn signals. You can also wire them as running lights . One or the other. |
|
| QUESTION: 2003 triumph tt600? sorry if your tired of saying yes but i hope you can say it once more |
| ANSWER: These are universal fit, not bike specific. These will work on any bike with a full front faring that is semi flat. These should work on your 03 Triumph no problem.I have sold them to other 2003 Triumph TT600 owners and I never received any negative feedback.
|
|
| QUESTION: hello will it fit a 2003 yamaha R6 on the stock location? any drilling? do i need to get the block off plates also? thanxx |
| ANSWER: These will fit perfectly over the stock location on your bike. |
|
| QUESTION: Will these fit on 2008 Hyyosung Gt650R? |
| ANSWER: yes |
|
| QUESTION: I am referring to the actual mirror that comes in the pig spotter fitting. One of mine flew out but the fitting stayed on the bike so i just need a replacement mirror.
|
| ANSWER: If you are askig for just the lense please contact a customer representative and give them your info and we will ship a replacment lense for free. |
|
| QUESTION: will these fit in the stock location on a '08 gsx-r600 |
| ANSWER: Yes |
|
| QUESTION: can pigspotter mirrors be used as turn signals also? |
| ANSWER: Pig Spotter 2's all come with built in turn signals. These can also be wired to run as running lights. One or the other. Your choice. |
|
| QUESTION: Is it possible to just order the mirror that goes in the fitting?
|
| ANSWER: Are you referring to stock mirrors??? |
|
| QUESTION: Will they fit an 1990 cbr 600? |
| ANSWER: These are universal fit, not bike specific.
These will work on any bike with a full front
faring that is semi flat. |
|
| QUESTION: I have an 07 GSX-R600 Black/Blue. Would the Translucent Blue the same color as my paint? |
| ANSWER: Close match but never intended to exact.
If your concern is to match the color you
should buy the black and paint to match .
We can sell it to you unassembled to ease
thec paint process.
|
|
| QUESTION: will these pig spotters fit on an 01 GSXR 600 ? |
| ANSWER: yes |
|
| QUESTION: sorry wanted to no if u have pig mirrors that fit a 1999 yam r1 please and how much |
| ANSWER: these are universal fit. These will fit your bike. $99.99 plus shipping . Black or chrome. |
|
| QUESTION: hi i was just wondering if the pig spotter 2 mirrors would fit an '08 gsx-r600
thanx
|
| ANSWER: Yes they will |
|
| QUESTION: Will they fit my 1994 RF900 Suzuki and what issues might there be? (If any) Peace, Lenny Less |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different length screws. We never mounted this item on a bike as old as your. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: will these fit an 08 ninja 250R |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different length screws. . These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Are there any pig spotters in stock for a 08 gsxr 600, or are there any that will fit that model? Any information would be highly appreciated. |
| ANSWER: These are UNIVERSAL. The set that fits your bike will work on almost any other bike. |
|
| QUESTION: hi i see someone has asked the question do these mirrors fit a triumph t595/955i my question is how much rear view is there, as the original mirrors sit further out from the bike and all i see is my elbows would appreciate an answer cheers jimmy |
| ANSWER: We designed these to be most useful when you are in the tucked racing position.
Please keep in mind these mirrors sit tight to the fairing.We designed these to complement the lines of full fairing bikes at the same time to function as a mirror. These also have intergrated turn signals. |
|
| QUESTION: Good Morning!
I have been searching 'your' site for the block off plates for the Pig Spotters.....no luck. Do you sell them or do I need to go to a fabrication shop and have some made??
Thanks!
|
| ANSWER: You can use a block off plate from any manufaturer. You can find cheapo plate from your local shop or make one yourself. This question has been sent to the makers of the Pig Spotter mirrors (me).I am not familiar with the other products 1-Tail carries on their site. You may want to direct your question to 1Tail customer questions under similar products your are looking for. |
|
| QUESTION: will they fit a 2008 ex250r ninja? and will they be in a different location? so I am gonna need to cover the mount location for the old mirrors right? Am I gonna be using the exsisting wires from the turn signals so they won't work so I am gonna need to cover those spaces too right, or just leave them inoperable? thanks |
| ANSWER: The wiring is a simple 2 wire connection. You simply splice the wires into the factory turn signals. You can also wire them as running lights. To use as running lights find a constant hot wire, attach the positive lead from the mirros.then ground the negative . I would suggest using a toggle swith on the positive wire if running as a running light.
These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Will these fit a1990 FZr 1000. |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different length screws. We never mounted this item on a bike as old as your. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Will they fit 07' ZX6-R |
| ANSWER: Yes |
|
| QUESTION: i have a 97 srad 600 will these beautys fit ? they have to .. the juice man from delmonty he says........ |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different length screws. We have mounted this item on a bike older than yours an 89 1100 Gsxr. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: will the pig spotters fit a 98 cbr1100xx blackbird?
|
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth screws. These will fit on any bike with a full front fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: I HAVE A2001 YZF600R I DONT HAVE ANY LED ON THE BIKE. DO I NEED ANY WIREING COMPONENTS |
| ANSWER: You just splice into the factory wiring harness.Simple 2 wire connection. |
|
| QUESTION: I didn't notice the same question I have. I know they are universal, but are there any issues with the 97zx6r's, as I believe the stocks bolt through the fairing and attach to the fairing metal support frame? Thanks |
| ANSWER: This application is the same as all. These are universal. we have never installed on a bike as old as yours but these will work on any bike with e front fairing. I have a local customer who insatlled these on his 89 GSXR 1100 with no problems. These are not bike specific, you can install these on almost anything. |
|
| QUESTION: I have an 08 GSXR 1000 and I am curious as to how these universal mirrors attach. The stock mirrors are bolted on but these pig spotters have no holes they are just slick. |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to.These mount from underneath the fairing up to the bottom of our mirrors. The hardware is hidden ,out of sight. |
|
| QUESTION: Thanks for your response.I also wonder if you have the black universal units without the LED lights?And do you have the plates that can cover where my old mirrors are removed from? |
| ANSWER: They all come with LEDs . 1-tail sells block-off plates somewhere on this site. This question is directed to the manufacturer of the Pig Spotters . |
|
| QUESTION: Do these match up exactly to a 01 tl1000r?just wanna make sure before i buy them.also how long til i would recieve them with standard shipping to 95367? |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: I wonder if these will work in the stock location on my 2003 Yamaha FZ!.If so do you have any pictures available so I can see how they look?Thanks so much. |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. We never mounted this item on your bike.No pics sorry. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: my questions is i m looking for my zx600e ninja 98 mirrors and i cnt find them but these universal mirrors called the pig spotter mirrors will they fit onto my bike so i can order them
|
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. We never mounted this item on a bike as yours. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: i have a 98 triumph t595 daytona. will these mirrors fit? |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. We never mounted this item on a bike as yours. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION:
I have the pig spotter mirrors on my 2001 Honda CBR600f4i and they are mounted flat which you can not see past my shoulders making them unusable. Is there a spacer for my bike that is needed?
thanks, Randy Williams
|
| ANSWER: These mirrors are much shorter than your stock mirrors. Since theses mirrors hug the fairings they provide you a diffrent view over stock. These were designed to be most functional in the tucked riding position. These mirrors are designed to be mounted tight to the fairing therfore spacers were never made. Some of our customers have made there own out of aluminum,wood wraped in Carbon Fiber ,or plastic/fiberglass. |
|
| QUESTION: about the universal pig spotters do you know if they will fit the 08 gsxr 600?
|
| ANSWER: Yes they will. |
|
| QUESTION: i have an 07 gsxr 750 --- Your Question is:
i ordered the pig spotter mirrors and i need some help with how they go on...are they gonna cover the recess where my stock mirrors are or will there be gaps...to you have to fabricate something to make them fit and look good...please help!! thanks
Our Answer is:
What kind of bike do you have.
|
| ANSWER: This bike requires no mods. We have installed these in the stock location without any hitches. |
|
| QUESTION: Will the pig spotter mirrors fit a 2008 R6?
|
| ANSWER: Yes |
|
| QUESTION: i ordered the pig spotter mirrors and i need some help with how they go on...are they gonna cover the recess where my stock mirrors are or will there be gaps...to you have to fabricate something to make them fit and look good...please help!! thanks |
| ANSWER: What kind of bike do you have. |
|
| QUESTION: Will these fit on a hyosung gt250r? |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. We never mounted this item on your bike . These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to.I would really like some pictures if you do purchase this item and mount them on your bike. |
|
| QUESTION: Is this part compatable with the 2005 2006 Honda CBR 1000RR? If not, which which part is compatable?
Thanks for your time.
|
| ANSWER: Yes these will fit your bike.These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: I have a 2008 zzr600. I see all these people asking the same questions and I probably am close to it too but will these fit on my bike in the stock location or o new holes need to be drilled? |
| ANSWER: Yes these will fit your bike.These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: 2000 suzuki gsxr 600, very hard to find accessories to this bike but these universal mirrors will fit right? and how many days will it take to ship to worcester, ma? |
| ANSWER: Yes they will . S.T .Machine has many acc. for the 2000 GSXR 600 sold on this 1-Tail website. |
|
| QUESTION: how about a 08' Ninja 650R? |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. . These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to |
|
| QUESTION: I have a 2005 GSXr 600. How do they work with led turn signals if there is no wiring up there |
| ANSWER: You simply run the wires from the mirrors down to the factory turn signal location. |
|
| QUESTION: Hey cool product! Will it mount to a 98 honda superhawk 1000 |
| ANSWER: Thank you.These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. . These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to |
|
| QUESTION: how about a 08 cbr 1000 rr, will they fit? |
| ANSWER: yes |
|
| QUESTION: Do you have these Uni-Pig-spotters in stock and can I get them Overnighted today 5 June to NC 28348 and at what cost? |
| ANSWER: Always in stock. Overnight to your zip is about $45.00 plus the cost of the product |
|
| QUESTION: Will the pig spotter 2 w/led have a perfect fit on the new body 2008 R6 seeing how the stock mirrors are attahced to the sides of the windshield? Is there any type of modification needed? Any drilling or cutting? |
| ANSWER: These are universal.These will fit as perfect as you can mount them.I can make them fit very good on your bike . You will have to find the place over the stock location where the fairing allows them to sit aa flatly as possible.You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Can u send photos of Pig Spotter 2 mirrors on 06-08 model Yamaha R6? |
| ANSWER: We dont not have any on the 08 R-6 on file. |
|
| QUESTION: I have a kawaski zx 14 '06. Im interesting in purchasing the pig spotter 2 mirrors. Will they fit in the stock position, or will i have to use mirror block offs and reposition the mirrors. Ive been receiving conflicting information. Please help.
|
| ANSWER: Its been ourexperience to mount them in an alternative location. I have had cutomers who have mounted them in the stock location . These customers we a step beyond just mounting them on the fairing in the stock location. They made a mounting pedastal that matched the fairing shape to the bottom of our mirrors.That reqiures some fab skills,but the result is pretty trick. |
|
| QUESTION: Are these able to fit in the factory spot on 2008 R6? Will new place holes need to be drilled? |
| ANSWER: Factory location. No new holes needed on your bike. |
|
| QUESTION: will it fit 06 f4i? |
| ANSWER: yes |
|
| QUESTION: Will these fit 2008 CBR 600?
|
| ANSWER: Yes |
|
| QUESTION: Hello,
I just wanted to know if you are still selling these without the led and in black? Because on the website it says they were replaced with Item no. STPS2. I have a CBR 900 RR 1998.
|
| ANSWER: Originals have been discontinued. |
|
| QUESTION: Hey what’s up? I have a question about the pig spotter mirrors. Will they fit a 03 Honda Cbr 1100xx and what modifications would I need to make in order for them to work?
Karl Chatman
|
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Will these mirrors fit a 1997 Kawasaki Ninja zx6r with out any mods? |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. The only mods you need to make is to wire the LEDS to your bike.Easy!!! |
|
| QUESTION: will these fit on a 2001 yamaha yzfr1 ans will I have to make any additional changes to my bike in order to make them fit? |
| ANSWER: These will fit your bike easily. Great fit on all year R-1 / R-6. No changes. |
|
| QUESTION: I tried to look and see if you had already answered my question but no such luck. Will they fit on a 1995 Suzuki RF600R with or without modifications??? Thx |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. We have mounted this item on a bike as old as a 1989 GSXR 1100 . They fit pretty good.. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: I have a 06' GSXR1000, and I currently have the mirrors in the stock location. I would like to relocate them on the top/sides of the bike for better visiblity behind me. Do you sell just the block off plates, and with diff. color choices? thanks |
| ANSWER: We sell simple block off plates in black or polished. |
|
| QUESTION: My name is Dave, and I have a 2007 Ducati 1098. I was just wondering if the universal pigspotters with the turn signals will fit without having to drill, or wreck my upper fairing? Thanks in advance. |
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth screws. The only drilling involved is in the base of our mirrors. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to the fairing. |
|
| QUESTION: hello,
I am looking for reassurance that these mirrors will fit a 1988 cbr 1000 f.
can you please tell me the bolt span from center to center on the mount plate?
thanks
|
| ANSWER: These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. We never mounted this item on a bike as old as your. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Bought set of pig spotter mirrors few monthes ago. Bike fell over and crushed one. Any Chance at purchasing just one? Thanks Matt |
| ANSWER: yes |
|
| QUESTION: Will the universal pig spotters fit an 07 cbr 1000rr without any mods or block off plates |
| ANSWER: Yes ,only some minor drilling through the fairing stays.These hole will never be seen when and if you decide to sell your bike and need to put the original equipment back on. |
|
| QUESTION: How well can you see the LEDs during the daytime? Will they function well as supplemental turn signals to flush mounts on the side fairings? |
| ANSWER: They work great. They use the brightest LED bulds on the market. |
|
| QUESTION: I have a 2000 Kawasaki ZX12R and wanted to know will these mirrors fit on mike bike and if not do you guys sell a adaptor kit? Also If they don't fit why? I understand that the ZX12R has a hump were the mirrors are mounted but is the bolt pattern to wide to mount down on the existing holes?
|
| ANSWER: You have answered your question. The hump will not the mirror to fit flatly on the fairing. The reason is the base of our mirror does not match the shape of the hump. We do not make an adapter . These mirrors are universal. You have to create the bolt pattern needed on the base of our mirrors. |
|
| QUESTION: i know you keep saying these are universal but i'm hard headed...fit 2003 gsxr 1000 in same place stock mirrors sit? these mirrors aren't adjustable so you may or may not be able to c out of them? |
| ANSWER: These will fit your bike. You adjust them before you set the final screw. |
|
| QUESTION: WILL THESE FIT IN THE STOCK LOCATION ON 05 GSXR 750 |
| ANSWER: Yes. |
|
| QUESTION: Will they fit on the 08 R6? |
| ANSWER: Yes |
|
| QUESTION: Will this fit a 94 ZX7R in the stock position?.... Is this something that can be done myself or should an installer install them? |
| ANSWER: Not in the stock position. Very easy to install. |
|
| QUESTION: will these fit a 1999 zx7r? |
| ANSWER: Yes ,but not in the stock position. |
|
| QUESTION: Do you ship to holland (europe) and wil these fit a cbr 600f hurricane 1990 |
| ANSWER: Yes we will ship to Europe and these will fit your Hurricane. |
|
| QUESTION: Will this fit the 2008 Hayabusa
br Anders |
| ANSWER: Yes all year Busa's |
|
| QUESTION: would these fit on a 2001 Triumph TT600 |
| ANSWER: These are universal fit. These will fit any bike with a full front fairing. |
|
| QUESTION: I have a 2006 SV1000S. My bike has a partial fairing will it fit my bike? |
| ANSWER: It should fit. |
|
| QUESTION: Will the pig spotter mirrors fit on a 2008 Kawasaki Ninja 650r?
Also how wide are the mirrors?
|
| ANSWER: These are universal not bike specific,but yes they will fit your bike. The lenses are almost 3 inches wide at their futherest points. |
|
| QUESTION: Do the universal pig mirrors fit on a Honda CBR125 - 2008 Model? |
| ANSWER: These are universal. These will fit any bike with a full front fairing.These will not work on bikes like the ZX14/12/9/7 and 954-929 in the stock location because of the hump on the fairing where the stock mirror mounts to. Our mirrors require a smoother surface like the CBR 1000/900/600. |
|
| QUESTION: Just want to check if they would fit on a 2006 V-Strom? |
| ANSWER: These are made as universal. These will mount on any bike with a full front fairing. |
|
| QUESTION: hey will these fit a 2007 gsxr -600 and are they legal in north carolina? |
| ANSWER: They are legal everywhere. These are a fully functional mirror.Yes ,they will fit your bike in question. |
|
| QUESTION: will these fit a 98 zx11? if not please tell me why. i have removed the entire mirror and have the indentation similar in shape. i have used rubber washers and bolts to hold the upper cowl/fairing. can i just place these over that? |
| ANSWER: These will fit any bike with a full front fairing .It should work nicely for your needs. |
|
| QUESTION: will you ship to Canada? |
| ANSWER: Yes.via US Postal |
|
| QUESTION: Im curious if these, or possibly any other replacement mirrors will fit a 1988 CBR 600, Whats the big deal about pig spotters opposed to regular mirrors? |
| ANSWER: The biggest difference is the looks. Compare the big Dumbo ears on your bike to the Pig Spotter 2s . There is nothing left to say. |
|
| QUESTION: WILL THIS FIT ON A 2002 TLR1? AND CAN YOU ADJUST THE MIRRORS INSIDE THE HOUSING UNIT,SIDE TO SIDE AND UP AND DOWN? |
| ANSWER: Non adjustable. These feature a con vexed lense. You adjust at the point of installation. These are universal fit ,not bike specific. These will mount on any bike with a full front fairing. |
|
| QUESTION: WILL THEY FIT 2007 BUELL |
| ANSWER: As long as your bike has a front fairing around the windscreen they will fit. These are universal ,not bike specific. |
|
| QUESTION: will this fit a 2007 honda Interceptor? |
| ANSWER: These are universal ,not bike specific. |
|
| QUESTION: are these legal in Georgia? will they fit '07 Gsxr750 |
| ANSWER: I dont know what your laws are in Georgia. These are fully functional mirrors. We have never had any issues with them not compling to any local laws. |
|
| QUESTION: I just got my pig spotter mirrors today and no matter which way i hooked up the wires I couldn't get the lights to work. I know there isn't a problem with my bike wiring because my old marker light work just fine. How would I tell if I got a defective pair of mirrors? Thanks! |
| ANSWER: If just one did not work I would say there is a problem . You are telling me both don't work. This highly unlikely. You should first bench test the mirros. Hook it directly to your battery. Do not worry about crossing the wires . LEDs only work in one polarity. Once you determine they work test your bike's wires to determine your utilizing the correct wires.Use a test light to accomplish this. In the past when this same question cane up I would ask have the stock rear turn signals been removed, In most cases the answer is yes. When the rear signals are remove this causes an issue and you have to add a diode. If you are not familiar with wiring see an expert. |
|
| QUESTION: Hi, will these fit a '99 cbr 600 f4 perfectly or does it some modification? |
| ANSWER: They will fit your bike.These are universal fit just as the description reads. As far as "perfectly" that is up to you or the installer. Thank you |
|
| QUESTION: How do the wires hook up, for the lights on the translucent styles, in order for the LEDs to stay lit? I got the turn signals on, but I don't know how to hook up the constant LEDs. |
| ANSWER: Using a test light locate a constant hot wire . Splice into this wire.I would install a switch as well. |
|
| QUESTION: Just a couple quick questions that you've probably answered a million times:
1. '06 Triumph Daytona 675, they are universal and will fit right? Ok, how exactly does that work? I snapped a mirror off on my garage and tried to put a Kawi zx6r mirror on and the attachment point was a different size. Could you explain how these mirrors attach that would allow them to fit two bikes whose mirrors aren't interchangeable?
2. My bike is red and therefore I am interested in the translucent red mirrors. However, I am curious as to the legality of having red lights facing forward on a motor vehicle. It seems like red and blue lights are used only by emergency vehicles. Are these mirrors illegal in any states (I live in Washington state)?
Thanks for taking the time, hope to hear from you soon.
Tom Dowell
|
| ANSWER: The base is universal.They should work on your bike. The red and blue sets should be wired to a switched 12 volt source. The turn signals on these are the legal amber color. |
|
| QUESTION: i havea 2007 kawasaki zx-6r and wanted to no if u have to do any wiring on this when hooking up |
| ANSWER: If you want to use the turn signals you will have to do some simple wiring. |
|
| QUESTION: what does the blue transparent do in sun light can you see the internal of the led portion or does it have a reflective apperance |
| ANSWER: These are semi transparent. You can slightly see the interiors. |
|
| QUESTION: Hey, I saw the question asked earlier but not sure when (date). Are they adjustable yet? |
| ANSWER: no |
|
| QUESTION: Hello,
I am interested on purchasing this pig spotters mirrors. but I just want to make sure if it will fit on my 1991 YAMAHA FZR600R
thanks |
| ANSWER: These are universal. They should work on your bike.We have never installed a set on an older bike as yours but I have had customers who have bought them for older models and received good feedback from them. |
|
| QUESTION: Any update on the availability of these mirrors for the ZX-12R? |
| ANSWER: N/A at this moment |
|
| QUESTION: Will this fit on 06 kawasaki zxr 636 |
| ANSWER: Yes, due to the fact that they are universal. |
|
| QUESTION: Do you have the Item #: STPS2 for a 1992 Suzuki GSX600F |
| ANSWER: Again ,these are universal. These are not bike specific. |
|
| QUESTION: i have a 99 gsxr 600 and i was wondering if the pig spotters that you offer would fit that year as well? and since they are universal, are they bigger then normal pig spotters? |
| ANSWER: Universal means they will work on most models.It is up to the installer to adapt.On your bike they will fit fine.Yes ,they are bigger then the originals. |
|
| QUESTION: I have a 02 GSXR Which wire is positive and Negative on the pigspotter mirrors and how do you distinguish b/t wires for Led for Trans and Turn signal wires. Thanks |
| ANSWER: Use a 12 volt source. Do not worry about crossing the wires. You will not hurt the LEDs.Hook a black wire to the negative side of the battery or another 12 volt source and then take a white wire and connect to the positive side..If that does not work take the next white wire. |
|
| QUESTION: will they fit yamaha fz1 2004 and can you actually see behind you?
|
| ANSWER: Yes they will fit.Yes you can see out of them. They will give you a diffrent viewing angle from stock.These have a fixed convexed lense. |
|
| QUESTION: Will these fit a 2000 Aprilia Mille R? |
| ANSWER: These are universal it is up to the installer to decide. You typically need a semi flat surface roughly 2" wide 3.5" long. |
|
| QUESTION: Is there anyway...special ordering or other...that I can get carbon fiber pigspotter mirrors with red led's for turn signial? |
| ANSWER: Carbon fiber coming soon .S T Machine will wrap the ABS composite mirror shells with real Carbon Fiber mesh and these will then be gel coated. These will include amber turn signals .The turn signal will be hidden under the Carbon Fiber mesh/gelcoat. The LEDs will be clearly visible through the carbon fiber once the turn signal is activated. Upon special request we can install red LEDs . Red LEDs are illegal to use as front turn signals .We will instruct the customer who is requesting LEDs other than amber these are now non-returnable or non-exchangeable.These will be priced slightly higher than the PIG SPOTTERS we currently offer. |
|
| QUESTION: will the pig spotters fit my '07 600rr? |
| ANSWER: yes |
|
| QUESTION: will they fit perfectly on a 2007 R1? without any mods? |
| ANSWER: They will fit without any mods. |
|
| QUESTION: What is the auxilary mounting position for the CBR929? Does it allow to keep the factory mirrors also or is it very close to the original holes? |
| ANSWER: On your model it will not fit in the stock location.You can keep the stock mirrors and position ours somewhere else on the fairing,but why?Since it will not mount in the stock location it will not be close to the holes.I have had customers purchase these Pig Spotters 2's for this model and I explained to them exactly what i have typed here.I have been told they look great when mounted in an alternative location.I have not seen any photos though. |
|
| QUESTION: Will these mirrors fit a 2006 Hayabusa?? |
| ANSWER: Yes ,they will fit perfectly |
|
| QUESTION: will they fit 1993 cbr 900 and is there any modification to do ? |
| ANSWER: We never tried on a bike that old.As long as you have a semi flat surface around the wind screen about 2" x4" it will work. |
|
| QUESTION: i ordered some pig spotters the order number is 28462. the money was taken off of my credit card and it's been a week since i ordered it. i have not yet received them. please let me know where they are i would like to put them on my bike as soon as possible. i have no mirrors right now and cannot ride without them. |
| ANSWER: E-mail 1-tail customer service.This is a tech line to the manufacturer not to 1-tail. |
|
| QUESTION: will the universal pig spotters fit the stock mounting bracket of 1997 cbr 600 F3 i believe they are? |
| ANSWER: yes |
|
| QUESTION: Will pig spotters fit 2004 R6? |
| ANSWER: yes |
|
| QUESTION: will the mirrors fit a hyosung GT250R 2006? Do they come in Red?? What is the expected shipping costs to ship standard to New Zealand? CHEERS |
| ANSWER: Don't know .They should, these are universal.As lons as you have atleast a 3" wide section on your fairing that is semi flat.They will fit on most fairings. |
|
| QUESTION: Will they fit 91 kawi zx7? |
| ANSWER: These are uni.You can mount them on any bike. All you need is a fairly flat surface. |
|
| QUESTION: will they fit a 99 gsxr750 |
| ANSWER: yes |
|
| QUESTION: hey i was wondering how the translucent pig spotters worked are they clear
with coloured led lights on the inside, are they black on the outside with
the coloured led light on the inside or are they the same colour as the
coloured light on the inside?...
|
| ANSWER: These are translucent blue on the outside.These also have blue LEDS on the inside and amber on the outside. |
|
| QUESTION: 06 R6 & do You ship to New Zealand? & if so, how much for the shipping?, Thanks |
| ANSWER: Yes and yes. |
|
| QUESTION: Will it fit a 2005 cbr600f4i??? |
| ANSWER: Yes ,perfectly. |
|
| QUESTION: how do i hook up the electric wire for a 2006 zx 10r ninja? |
| ANSWER: Use a test light and find your turn signal hot wire.Then locate the ground wire.Once these wires are located splice into them. You should do a bench test first. |
|
| QUESTION: will it fit a 96 or 97 cbr 900rr, any mods needs? and what mounting hardware does it come with? |
| ANSWER: Yes it will work on your bike. |
|
| QUESTION: Will they fit a 2000 YZF R1 |
| ANSWER: yes perfectly |
|
| QUESTION: i have a 01 sv650s, what wires do i connect from my running light to pig spotters for running light and signal combo?` |
| ANSWER: If you are using them as a running light find a constant hot wire activated by the key switch.If you use them as turn signals locate your stock turn sinal wires and splice into those wires. Use a test light to locate the correct wires.If you want to run them as both a running light and turn signal you are going to have to run a relay switch in your wiring.If this does not explain your question go to your local shop.This is really a simple installation if you read the directions and follow the steps. |
|
| QUESTION: I was wondering the translucent red pig spotters are they black on the outside and the red glows from inside or are they red or clear with red lights the inside?
|
| ANSWER: They are translucent red with red LEDs on the inside.The turn signals on the outside are amber. |
|
| QUESTION: will they fit my 02 fz1 with little or no mods and if i have to mod what is it |
| ANSWER: Universal,but they will work on your bike. |
|
| QUESTION: will the mirrors fit on a 2007 kawasaki ninja 650r |
| ANSWER: yes |
|
| QUESTION: 3 Part question
will these fit on an 06 GSXR 600?
How good is the view compared to stock mirrors?
For the Transluscents, do they glow only when blinker is on, or are they constantly illuminated?
|
| ANSWER: They will fit perfectly on this model.View is going to be different than stock.You must take into consideration the stock units have a 6-7 inch stem ,these sit tight to the fairing.The traslucents have a seperate LED lighting strip on the inside of the mirror housing.Depending on how the installer chooses to wire the inside LED will determine when the light comes on.If you wire it to a constant hot wire it will always be on.The turn signal on the outside should be wired to the turn signal. |
|
| QUESTION: These look great will they mount onto a 04 yamaha FZ6 |
| ANSWER: Perfectly |
|
| QUESTION: will the pig spotters fit a 2001 kawasaki zx-7r? |
| ANSWER: Not in the stock location |
|
| QUESTION: yes I am referring to the original (discontinued) Pig Spotters.
How can I purchase the plastic mounting brackets for them?
Thank you for your quick response.
|
| ANSWER: call 561 620-2852 ask for Stan |
|
| QUESTION: do you sell black ones without LEDs ?
I have a set now, but the inside platic mounting kit is broken.
Can I buy just the mounting kit? |
| ANSWER: Yes, you can buy the mounting kits.I am led to think you are referring to the original Pig Spotters.These have been discontinued. Some replacment parts are still avaiable. |
|
| QUESTION: will these fit a 2005 Katana? |
| ANSWER: yes |
|
| QUESTION: will these fit a 2005 Katana? |
| ANSWER: yes |
|
| QUESTION: 2005 ZX-6R? |
| ANSWER: yes. |
|
| QUESTION: Will they fit 05' Ninja ZX636 with a puig screen? If so will I need block off plates? |
| ANSWER: These should work on the stock location.The wind screen has nothing to do with the installation of this product. Stock or otherwise. |
|
| QUESTION: '05 EX500? |
| ANSWER: no |
|
| QUESTION: i have a 03, cbr 954rr and i WANT the pig mirrors. but it says my bike model requires new mounting location...what EXACTLY does that mean for me. DRILLING? WIRING? etc. i want to know if it is somthing i can realistically do myself.... |
| ANSWER: What this means is , your fairing because the way it is contoured where the stock mirror sits , will not allow a flat enough area to mount these.These can be mounted in an alternative area on your fairing. Drilling will be required. Anyone can install this product. |
|
| QUESTION: hi would these mirrors fit on a 1999 yamaha r6 and how much is shipping to the united kingdom cheers mate paul.... |
| ANSWER: Yes and about $22.00 US using he Post Office.Ups would be more than double. |
|
| QUESTION: i don't know how long ago these questions were posted, but do they fit the green zx12r 2001 model???
how much will it cost to the u.k.???
be gentle i'm a British "piggy" and assume these things are named after us!!!
|
| ANSWER: Sorry they will not fit hte zx-12 |
|
| QUESTION: Will these fit a 2007 Suzuki GSF1250 Bandit? Will they mount over the existing mirror indentations in the fairing to hide them? How impaired will by vision be if at all compared to the stock mirrors? |
| ANSWER: These are made to be universal.It is up to the installer to make them work on their app.These will fit on all most all full fairing sportbikes with a semi flat surface around the windshield. |
|
| QUESTION: Will these fit a 1999 Yamaha R1 without any modifications? |
| ANSWER: Yes they will fit. No mods to your bike or the mirrors. Just some simple wireing. |
|
| QUESTION: Are the mirrors fairly simply to install on my bike? I haven't seen anyone with a red R6 using the black mirrors. Do you have pictures?
|
| ANSWER: Easy to install with basic tools. |
|
| QUESTION: hello, will this fit a 2007 kawasaki zx6 and will the green match the 2007 lime green? the light stay oconstant or signal? |
| ANSWER: The green was made to match the Kawi as close as possible. The green light can be wired as a constant.The amber light on top should be wired as the turn signal. |
|
| QUESTION: will these fit a 1994 Honda cbr 1000f Hurricane... Thanks |
| ANSWER: yes |
|
| QUESTION: will this fit on my 2003 ZX9R stock location? do you sell block off for ZX9R too? |
| ANSWER: yes and no |
|
| QUESTION: i got the trans.red and the turn signal works but i can only get the leds in the light to work when my turn signal is on. What do i need to do to get the led lights in the pig spotter to stay on all the time. 06 Suzuki GSXR 600 |
| ANSWER: Wire them to a constant 12 volt source. |
|
| QUESTION: When ordering do i put 2 for how many or 1 to get a pair? |
| ANSWER: One will get you a pair. |
|
| QUESTION: will thay fit an 1996 katana 600 |
| ANSWER: yes |
|
| QUESTION: will they fit a 1988 cbr 1000F hurricane? If not any suggestions other than Ebay or OEM |
| ANSWER: These will fit. |
|
| QUESTION: will these fit on a 2000 triumph tt600 |
| ANSWER: yes |
|
| QUESTION: is there any drilling required for a 2004 kawi zx636 and if i wanted to use these as my only turn signals what kinda options are there to cover the stock holes left on the lower fairings |
| ANSWER: You have to drill a small hole for to feed wire for the LEDs.As far as blocking off the hole in the fairing,some people go as far as fiberglassing the hole shut.Some people install flush mounts to run with the Pig Spotters. |
|
| QUESTION: What do I do once I have determined which wire is which? Should I disconnect the running wire?
|
| ANSWER: Once you have determined which wire does what function,you have to decide how you are going to use the LEDs.Do you want run them as running lights or do you want to run them as turn signals? Once you make this decision,wire accordingly.Locate the gound then .Wire the ground wire.Locate the turn signal wire.Wire the turn wire(if you choose to run them as turn signals). |
|
| QUESTION: Will these fit on a 2004 GSXR 1000? |
| ANSWER: Yes ,perfectly. |
|
| QUESTION: Will these fit 1996 zx-11? |
| ANSWER: not in the stock location |
|
| QUESTION: Will this fit on a 07' gsx-r1000? |
| ANSWER: yes ,perfectly |
|
| QUESTION: Will they fit a an 07 Honda CBR 600RR? |
| ANSWER: Yes perfectly |
|
| QUESTION: I have another question. On a 2007 triumph daytona 675, what is the pitch of the mounting holes on the pig spotters? Are they identical to the pitch on the oringinal triumph 07 mirrors? Or will one hole be off. I dont want to drill any extra holes if possible. |
| ANSWER: These are universal fit.These are not bike specific. |
|
| QUESTION: I have a 2007 daytona 675. Will these fit in the stock location? and if not how many holes will i need to drill? Also can I purchase block off plates from you, and how much are they? |
| ANSWER: You can purchase block off plates from S.T. Machine on the 1-tail site.The mirrors will fit on the stock location.You only have to drill one hole for the LED wire. |
|
| QUESTION: The mirrors look great, but I installed them along with Flush Mount Signals - Amber LED, Smoke Lens: Honda CBR 600RR (03-06), CBR 600 F4i (99-07),1000RR (04-05) H04RR-SIG-SMK. Now my signals stay on all the time. They blink when I put my turn signal on but I can't turn them off unless I turn the bike off. How can I fix this? |
| ANSWER: Double check your wiring.This is always the case.Honda's have three wires coming from the stock harness.One wire is the ground,the other is a turn wire and the last is a running lite wire.Use a test light to determine which is which. |
|
| QUESTION: How do I connect to '93 cbr900 with three wires from main harness? Thanks... |
| ANSWER: Using a test light.You must first determine which is the ground wire in the 3 wire stock harness. Then using the test light again determine which is the running light wire and which is the turn sinal wire.Now since you have determined which wire is which( label each wire as you determine its function).Connect the wires from the Pig Spotters to the appropiate wire from the stock harness.You only use the stock ground wire and the stock turn signal wire.Sometimes you will have to reverse the connection. Do not assume the black wire goes to the black wire and the white wire goes to the white wire.This assumption causes installer many headaches. USE A TEST LIGHT AND SAVE YOURSELF TIME AND FRUSTRATION. |
|
| QUESTION: Well this product fit my 1999 Honda CBR 900RR |
| ANSWER: yes |
|
| QUESTION: 2004 GSXR1000 bolt straight on without relocating? |
| ANSWER: These are universal,but yes they will install in stick location. |
|
| QUESTION: Do they fit an 02zx-12?if they don't fit,is the adapter available,if not when? |
| ANSWER: not yet |
|
| QUESTION: i have a 2007 kawasaki zzr600, will the fit? where do you run the wires...how hard is it? |
| ANSWER: These are universal fit ,but your answer is yes ,through the faring in between the stock mounting holes and very easy to install.All you need are some basic hand tools and drill. |
|
| QUESTION: will these fit an 03 zx6rr? and how does the wiring plug into existing wires? |
| ANSWER: Again these are universal. The answer to your question is yes,they will fit on to your bike nicely.To hook up the wires you simply locate the factory turn signal wires and splice into them.Make sure you determine which is ground and which is the flasher wire . |
|
| QUESTION: Do you have any pictures of the translucent mirrors during the day? Just wondering what they look like without the glow... |
| ANSWER: They are the base color .Red ,blue or green. |
|
| QUESTION: Will these mirrors fit a "1994" kawasaki zx9 900, and is there any modifications that would have to be done? |
| ANSWER: More than likely and some mods might be needed on a 1994 model. |
|
| QUESTION: I have a 2006 GSXR 1000. Will these fit the standard mirror mounts without drilling any holes and are they legal in Florida? For that matter, what States are they NOT legal in? |
| ANSWER: We , the manufactures are in Florida.Yes and yes |
|
| QUESTION: how about 06 Triumph Daytona 675? |
| ANSWER: Yes |
|
| QUESTION: Will these fit on my 2005 Kawasaki ZX10? |
| ANSWER: Yes and perfectly. |
|
| QUESTION: I have a 2005 fz6 i want these mirrors but i have a puig windscreen will it fit my bike or do i have to back to the stock windscreen |
| ANSWER: The windscreen should not affect the installation of these mirrors. |
|
| QUESTION: Hey sorry for another question. I am sure these will fit on the yamaha fz1, but I am not sure if I will need block off plates due to the position of the original mirrors. If I do need the block off plates are they available through your website as well. Thanks. |
| ANSWER: Yes |
|
| QUESTION: i have a 2004 gxsr 600 will they fit onto factory setting or do i need to redrill the holes? also is this type of mirror legal in new jersey? |
| ANSWER: Yes ,yes and yes |
|
| QUESTION: Will these fit in the stock location for a 2002 Suzuki Bandit 1200S? |
| ANSWER: yes |
|
| QUESTION: I want to purchase them,what do I do next??.
The shipping is to Mexico City,and it says that I need block-off plates,its that included also?,I want them for a 954.
I want all the things to install them and make them look great before I send the money.
Thank you |
| ANSWER: These will not fit in the stock location.They will work in an alternative location.That is why we say you might need block off plates.Which are not included. |
|
| QUESTION: Will these fit a 2005 Ducati Monster 620 Dark? |
| ANSWER: Yes |
|
| QUESTION: so..i guess this will fit a 06 R6S is there any drilling or cutting on my fairings or will it fit on my stock holes for my oem mirrors.do you have a picture on a 06 R6S...thanks |
| ANSWER: Yes and you will have to drill a small hole to run the wires for the LEDs. |
|
| QUESTION: Do you have any of the OLD style PigSpotters available, If so what is the cost and...can you send to Australia ..
Regards
Jo |
| ANSWER: I have some polished without LEDs .Some chrome with and without LEDs. Polished is $100.00 and chrome $150.00 ,chrome w/LED $200.00. Plus shipping which is usally between $80.00-$88.00. |
|
| QUESTION: how come the kawi green looks darker?
its not lime |
| ANSWER: It matches the new Kawi green. |
|
| QUESTION: are the adjustable pigspotter 2 mirrors available yet? if not, when? is there any drilling required on a 05 gsxr1000? |
| ANSWER: no and minor drilling for the LED wire |
|
| QUESTION: Will they fit a 2006 Katana 600. Do they bolt right up without any modifications? |
| ANSWER: Yes and yes. |
|
| QUESTION: will they fit on a 2007 r6s? |
| ANSWER: yes |
|
| QUESTION: Mmmm ok,Im really interested in this product,
I need your help.
Do they come with instructions?
Do I have to drill?
Will I get good Visibility?
I want to make sure before anything. |
| ANSWER: Yes ,yes and for a small mirror with a convexed lense you get a supriseingly good view. |
|
| QUESTION: Will you be able to ship to mexico city?
If yes do they fit to a 954 with no problems or no modifications,I want them to have a nice clean fit.thank you
gracias |
| ANSWER: Yes and no |
|
| QUESTION: I have an (06) gsxr-600 I know they fit but I noticed that on the pictures of the suzuki's they all have block off plates ( an "05" - "06" ). Do they fit in the stock slots or do you need to motify and use block offs and to remount in a different location? |
| ANSWER: These are usally mounted in the stock location on that paticular model. We are just trying to illustrate how universal these can be. |
|
| QUESTION: These mounting screws seem a bit long. And it looks like that I have to remove the front fairing just to mount these mirrors on an 05 600RR, Right? |
| ANSWER: The screws supplied vary in size.On a Honda 600 the fairings do not need to bo removed. |
|
| QUESTION: I have a 2002 Honda Interceptor (VFR 800). I want to purchase the chrome Pig Spotters. Will they fit my bike? |
| ANSWER: Tese are universal. If your bike has a full front fairing it should work. |
|
| QUESTION: will they fit on a 06' kawasaki zzr 600 |
| ANSWER: yes |
|
| QUESTION: how about a 98 cbr 600 f3? |
| ANSWER: Yes |
|
| QUESTION: Hey will they fit..... I know universal... I check your site fequently but i didnt know if you had a time frame on the red translucent ones? I believe I read that they were supposed to be out in a few weeks. I was just unsure if there was a def. date as of yet? Thanks |
| ANSWER: 3-4 weeks from now |
|
| QUESTION: I have a kawsaki 2001 zx9 con these pig spotters go on that bike any ware and has it been done be fore? |
| ANSWER: yes and yes |
|
| QUESTION: I see this pig spotters are universal why wont they fit kawsaki 2001 |
| ANSWER: We never said they will not fit a Kawasaki 2001. What Kawasaki are you refering ? I am sure Kawasaki made more than one model that year.They will not fit a ZX-12/9/7 in the stock location.They will fit in alternative locations on those models. |
|
| QUESTION: 1991 Yamaha FZR600, Will these Pig Spotter Mirrors fit this make/model and if so will they mount up to my stock holes? Thanx, Will |
| ANSWER: We have never installed the Pig Spotter 2's on a bike as old as yours. If you have a front fairing and it is fairly flat where the stock holes are then they should work ,no problem. |
|
| QUESTION: are there any made without turn signals? |
| ANSWER: Just as the description above states ,they come with the LEDs. No delete option. |
|
| QUESTION: You’ll notice from one of my earlier orders that I have flat panel marker lights on the front of my bike. Will the pig spotters work in conjunction with them or how will I need to do that? |
| ANSWER: Yes they will. |
|
| QUESTION: will these mirrors fit the stock mouting holes of a 93' cbr 600 f2 |
| ANSWER: yes |
|
| QUESTION: i have a zx9 2001 will they fit and do they come as a pair |
| ANSWER: no and yes |
|
| QUESTION: Will you be able to ship to Sweden ? / DD |
| ANSWER: NO PROBLEM. |
|
| QUESTION: How will they fit on a yamaha r6 2001 ? |
| ANSWER: PERFECTLY |
|
| QUESTION: With the translucent blue, is there a light that is on inside of the mirror like a running light? Or is it just blue when it blinks? |
| ANSWER: THE BLUE LIGHT ON THE INSIDE IS ALWAYS LIT.THE AMBER LIGHTS ON THE OUTSIDE ARE MEANT TO BE TURN SIGNALS. |
|
| QUESTION: will this fit a 02 tl1000r |
| ANSWER: YES,REMEMBER THESE ARE UNIVERSAL. |
|
| QUESTION: will these fit a 94 cbr 900rr in the existing mirror holes |
| ANSWER: yes |
|
| QUESTION: Will they fit a 1992 VFR?,and is the vison as good as OEM |
| ANSWER: no and as far as we are concerned ,yes. |
|
| QUESTION: is there a set without l.e.d.s that will fit a 2000 kawasaki zx6r |
| ANSWER: All have LEDS.These are universal .But yes they will fit your bike bike, no problem.Order today!!! |
|
| QUESTION: WILL THESE MIRRORS FIT ON A KAWASAKI 2005 Z750S |
| ANSWER: These are universal.They will fit any bike with a full front faring. |
|
| QUESTION: my is dion johnson order number is 23835,chrome 2007 zx10 mirror spotters |
| ANSWER: It has been sent out. |
|
| QUESTION: just ordered the chorme spotters for 2007 zx10 just want to confrim that they will be chrome, thanks |
| ANSWER: What your name ?? I would need that to look at your order.The questions submited here are anonymous. |
|
| QUESTION: You said that you dont need block plates for the gsxr 1000 2007. What about the 2006 gsxr 1000 because I see block plates as well as the mirrors on the gsxr 1000 pic you have posted. Thanks. |
| ANSWER: This is to show you can mount these anywhere on the fairing.These are totally universal. You decide where on the bike you want to mount them. |
|
| QUESTION: Will these mirrors fit a 1998 Kawasaki ZX9? |
| ANSWER: No |
|
| QUESTION: do they fit a R1 yamaha 06?
is the view as good as the stock mirror?
Thx. Jacques |
| ANSWER: YEs and as far as we are concerned yes |
|
| QUESTION: will the fit a 2002 tl1000r and would i have to drill a hole to get the ones with turn signals to work? |
| ANSWER: Yes and yes |
|
| QUESTION: Can you email me pictures of the underside of the mirrors so i can come up with some form of mounting bracket ??? |
| ANSWER: No mounting plate needed.Unless you intended to modify it to fit one of the few bike as a no-fit.Those bikes are 954/929 zx14-12-9-7.Those bikes will need to have the mirrors mounted in an alternative location. Sorry no pics of the base. |
|
| QUESTION: I have a 2001 cbr 929. Just wanted to make sure that these will fit. And if I can wire the LED's right into my factory signals? Thanx |
| ANSWER: These will not fit on the stock location on your model. You can mount them in an alternative location. |
|
| QUESTION: Any luck on the adapter plate for the CBR 929 yet ?? Will this be included in the price ?? How much normal seating vision do you lose ?? i.e. are you looking straight back into your torso or is there scope for adjustment on these mirrors ?? How much for frieght to Sydney AUSTRALIA ?? Cheers |
| ANSWER: No sorry. |
|
| QUESTION: Will the Pig Spotter fit an 06 SV650S |
| ANSWER: yes |
|
| QUESTION: Quick question are these mirrors adjustable? |
| ANSWER: No not yet.We are working on an optional adjustable base .It should be avaiable in the next 2 months.It will extend the mirror base 2-3 inches off the fairing. |
|
| QUESTION: do they fit a 2001 kawasaki zr7-s |
| ANSWER: no |
|
| QUESTION: it also fits 2007 kawasaki zx10? you would think after reading all other question i would'nt ask lol, thanks |
| ANSWER: Yes it does. |
|
| QUESTION: I really did not understand the answer from my last question I was wondering if the pig spotters come with or will be coming with and option of choice of LED color, such as blue or red? Thank you |
| ANSWER: NO options on the color of the LEDs. All have and will have Amber LEDs. |
|
| QUESTION: What about a 2000 yamaha yzf 600r without making modifications? |
| ANSWER: Will fit perfectly on this model. |
|
| QUESTION: do you have blue or red LED's with the spotters or just amber? |
| ANSWER: You can special order blue LEDs .An up-charge will apply of course.No refunds or returuns on special order items. |
|
| QUESTION: ON MY 2006 SUZUKI KATANA THE TURN SIGNAL LIGHT HAS 2 WIRES? WILL I JUST NEED TO SPLICE THESE TO AND CONNECT THEM TO THE MIRRORS IN ORDER FOR THEM TO WORK? |
| ANSWER: You are correct. |
|
| QUESTION: Will it fit on a 04 R1, and what does the blue look like during the day? |
| ANSWER: Yes and it looks like royal blue during the day. |
|
| QUESTION: will these fit a 2000 kawasaki ninja zx9r in the stock or factory mirror holes |
| ANSWER: Not in the stock location. |
|
| QUESTION: Do you sell the spotter mirrors without LED`s? |
| ANSWER: They all come with LEDs. You can not order them without. |
|
| QUESTION: Do they fit a 2005 GSXR600? |
| ANSWER: Yes, they fit a 2005 GSXR600. |
|
| QUESTION: Will these mirrors fit on the ZX14? |
| ANSWER: Will not fit in stock location. They may be mounted by drilling the appropriate holes in the firing and using a block-off plate in the old mirror mounting location. |
|
| QUESTION: Will these fit a 1995 ZX9R? |
| ANSWER: Yes |
|
| QUESTION: Will these fit a 2006 SV650S? |
| ANSWER: Yes |
|
| QUESTION: Will this product fit a 2000 GSXR750? |
| ANSWER: Yes, it will fit a 2000 GSXR750. |
|
| QUESTION: Will they fit on a 2007 GSX-R1000?
Will I need to get block off plates?
Thank you.
|
| ANSWER: Yes and no. |
|
| QUESTION: Will these fit a `94+ Kawasaki Ninja EX500? Will I have to buy additional mounting hardware? |
| ANSWER: These are universal! We supply a variety of hardware in the kit to ease installation. |
|
| QUESTION: Do you have dates for when the red or blue LED's are coming in? |
| ANSWER: Blues will be released in the next 2 weeks. Red and green in the next couple of months. |
|
| QUESTION: Hey do you guys have these in red to match the o7 zx6 also will they fit on the o7? |
| ANSWER: The black units are paintable and can be sent to you un-assembled.You can paint these yourself to match whatever bike. |
|
| QUESTION: Will these fit a Katana 600 2006? Is wiring necessary for the blinkers difficult? How do they bolto-on to the bike? Is drilling necessary? |
| ANSWER: These bolt in the stock location.A hole must be drilled if you choose to use the LEDs . If you choose not to use the LEDs no drilling to your fairing is required.The hole is just big enough to run 2 small gauge wires.The hole will be drilled underneath where the stock mirror or our Pig Spotter 2 mirror will mount.Out of site. |
|
| QUESTION: so am guessing these will also fit an 06 kawasaki zx6r? |
| ANSWER: yes they will |
|
| QUESTION: Will these fit on a 1999 HONDA CBR 1100XX Blackbird? |
| ANSWER: These are universal. They will fit on anything that has a full front fairing. |
|
| QUESTION: what is the best way to wire it up so that I can use both the side mounted flush signals I currently have on and those on your mirrors for added visibility? It's on an 06 R1 |
| ANSWER: Yamahas have 3 wires coming from the factory wiring harness to the turn signal.1 wire is a groud ,1 is a turn signal wire and the third is a running light .You have to find the turn signal wire . Once you locate this wire splice into this wire . The wires are not always color cordinated.try diffrent combos. |
|
| QUESTION: can I make these fit a 2002 Triumph daytona 955i?
and do you ship to Canada? |
| ANSWER: yes and yes |
|
| QUESTION: WILL THESE FIT A 2002 KATANA 600? |
| ANSWER: Yes they will. |
|
| QUESTION: Another will it just fit question...will it fit my 98Honda VTR1000? thnx |
| ANSWER: These are universal .These will fit most sportbikes with a full front fairing. |
|
| QUESTION: How long for the zx 14? |
| ANSWER: A couple of months. |
|
| QUESTION: Are the LED's effective turn signals? |
| ANSWER: Very . These are the brightest LEDs on the market. |
|
| QUESTION: will they fit on a 2007 cbr600rr? |
| ANSWER: yes they will |
|
| QUESTION: well i know they fit all bikes, but if u wire them up to the 2006 gsx-r-1000 will i have to cut any wires or will they plug right in to the stock connectors |
| ANSWER: These are universal so the connections must be made for that specific application.You just splice into your factory wires at the turn signals. |
|
| QUESTION: Does the Kawasaki Green match the current green or the older green that was used on 2004 and earlier bikes, pictures on a green bike? |
| ANSWER: These are not avaiable at this time.The green will match the current tint. |
|
| QUESTION: how about the 2007 r1? |
| ANSWER: Perfect fit. |
|
| QUESTION: will these fit a 2002 suzuki katana? |
| ANSWER: yes |
|
| QUESTION: I know you are probably sick with answering all these questions since the mirrors are universal!!Anyway do they fit the new kawasaki zx6 2007?:) |
| ANSWER: I love answering all these questions .It is part of the job.Yes they will fit. |
|
| QUESTION: do you guys deliever to australia?? |
| ANSWER: All the time. |
|
| QUESTION: Do you have instructions for wiring the leds???
+ Will the pig spoters fit an 01 r6? |
| ANSWER: Yes and yes |
|
| QUESTION: 1996 F3 600; will they fit. If I get chrome what color are the LED's? |
| ANSWER: Yes it should fit. All LEDs are amber. |
|
| QUESTION: I am not going to ask if they fit.I think if you have to ask,sell your damn bike.Also JK stands for just kidding.Now to my question.My bike is a 05 R1 all customized.Can one ask to get a custom color (shift red) done to the spotters for the right price?2.Do they only come with amber led's or can I custom order red led's? |
| ANSWER: We do not offer color options. The black mirrors are the ones customers buy to customize. We do not offer color option'sfor the LEDs at this moment.We should have some red and blue LEDs in the next few weeks. |
|
| QUESTION: ok they are universal but what kinda hardware comes with the spotters 2?is it like a mounting base for differant applacations or just a few screws and bolts? because the 06 and 07 gsxr 600 has a little bit of an indention, will it fill that indention or will there be a bit of an gap? |
| ANSWER: On your bike it will go over the indentation. These bolt up underneath the fairing using coarse thread screws. We suppy assorted length hardware the installer will choose what hardware to use.We send detailed pictures to ease installation. |
|
| QUESTION: will this fit a 1999 kawasaki ninja zx600r |
| ANSWER: Yes it will. |
|
| QUESTION: Hi, here is the part number for Pig Spotter Mirrors (Universal). Item #:
STPS2
Hi, do you make adaptor/mounting plates for these mirrors (Item #: STPS2)
for a 1994
Kawasaki Ninja ZX7 so that they will fit in the existing stock mirrors'
holes? What are the dimensions of this mirror? Length, width, height,
diameter of |
