YZF R1 Fender Eliminator Kit - '04-'06
Kit includes pivot mounted license plate bracket, with new turnsignals & license plate light.
This item usually takes about 1 to 2 days to ship
Item no. 1Y1006
Retail: $149.95(PLUS shipping)
Today$146.95
Application Chart Diagrams
Application
2004 Yamaha YZF R1
2005 Yamaha YZF R1
2006 Yamaha YZF R1
These are the best quality installation instructions we have. They are not very pretty but they should give you an idea of how this kit mounts.
This scan is copyright 2004 1Tail.com
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Will it fit 08 yzfr-1?
ANSWER: no.....try the 1Y1008
QUESTION: will u ship to dubai?
ANSWER:
QUESTION: will you send this to England? If yes how much?
Nick
ANSWER:
QUESTION: Do you have a fender eliminator like this one for the R1 2007?
ANSWER: yes....1Y1008LTD
QUESTION: the left bulb on my eliminater kit is out. How do I replace it? 07 Yamaha R6.
ANSWER: Contact Comp Werkes
QUESTION: I currently ride a 2004 Yamaha R1 with a fender eliminator kit that mounts
in between the passenger foot rests. Looking at your inventory, I see that
some of your kits come with the necessary block-off plates needed to cover
the holes left from the factory fender...which I currently don't have.
I was wondering if it would be possible to buy the block-off plates by
themselves, without buying the entire kit? And if so, is that something I
need to contact you directly for, or can it be done through your online
ordering forms?
Thanks,
ANSWER: We only can get full kits. Comp Werkes will not seperate kits.
QUESTION: 2007 R1 rear fender eliminator kit out yet?
Thank you
ANSWER: About 2-10-07
QUESTION: Im assuming this would fit the 07 R1?
ANSWER: No, the 07 is different. This would have clearence issues. The 07 will be out early Feb.
QUESTION: Can this mounting kit come with no turn signals? My brake light has amber turn signals built in.
ANSWER: no
QUESTION: I bought a couple a month ago akit, but now I´am needing the replacement for the license light. Do you have it?, How much this cost? Could you send me the part by mail?
ANSWER: call comp werkes
QUESTION: what is the full webpage adress for competition werkes?
ANSWER: compwerkes.com werkesusa.com competitionwerkes.com you choose!
QUESTION: hi i just ordered a fender eliminator and how can i track my item ?i havent received an email from 1tail about my tracking number,thanks! mike
ANSWER:
QUESTION: do i have to drill any holes in my bike to put this on.
ANSWER: yes for wiring access
QUESTION: Will this elliminator ever be offered with LED turn signals and LED Lic. plate light? can you get C.W. to do that? thanks
ANSWER: no
QUESTION: Do you sell front turn signals that match the ones included in this set?
ANSWER: Yes, Flush V...but they don't fit perfect on the front of the R1
QUESTION: What happens to the stock licence plate bracket holes in between the exhaust?
ANSWER: We send stainless hardware for the holes.
QUESTION: Does this kit work with the 2006 R1??
ANSWER: yes
QUESTION: Will this kit work on a 2006 R1?
ANSWER: Yes
QUESTION: Regarding to the 4 allen bolts holding the rear foot peg mounts in the YZF R1. Until now, I could not loose them, because they are to tight so that I'd like to know if you can give some tip to get move them?
I'd like to say for you that the product is very well done, the shipping was good and that was really good trade with you guys.
Thank you so much.
ANSWER: If you need a little extra leverage, put a wrench on the Allen wrench to help turn. Make sure your Allen wrench is fully inserted and turn slowly.
QUESTION: Hi All!
I miss the dimensions of the plate holder as I need to fit an Australian plate on it. If the plate holder is too small, I will get clearance issues...
ANSWER: Designed for a 4"x7" plate
QUESTION: is this kit made of metal or plastic?
ANSWER: All stainless steel
QUESTION: Is it possible to get red turn signals? Thanks
ANSWER: no all signals flash amber
QUESTION: I have the rear hugger from power bronze on my bike. Can I fix the fender eliminator without touching the hugger?
In addition, when I am using left or right signals on the road is it visible and remarkable for cars like the originals...?
ANSWER: To hard mount it defeats the purpose. Signals would be brighter if the plate were in the down position.
QUESTION: Is there a Kit similar to this that will fit an 05 r6?
ANSWER: NO
QUESTION: is this kit legal
ANSWER: check with your local DMV
QUESTION: Do u sell the licence plate bracket and light without the turnsignals? Because i'm getting the integrated LED tail light.
ANSWER: Contact Competition Werkes.
QUESTION: My question is in regards to the turn signals. The answer provided above is kind of vague, can you explain "only kits purchased through Competition Werkes can be modified". Does this mean I have to go through CW in order to purchase a fender eliminator sans turn signals? Or can I just not have them installed? The picture provided above looks as though it bolts via the license bracket......if you could provide some clarity I would really appreciate it. I just purchased an '05 and am looking to clean up the back end. I do intend to get an integrated turn signal so I'm having trouble finding a company that provides a relocation bracket just for the license plate. Any info/suggestions you could provide would be greatly appreciated. Thanks.
Ron
ANSWER: To get a kit without signals you must purchase directly from Comp Werkes. They will not modify kits purchased through 1tail. C.W. will customise kits purchase from directly fom them.
QUESTION: Are the turn signals LED or 12v light bulb?
ANSWER: They're a 12v bulb
QUESTION: will this kit fit a 2003 R1?
ANSWER: NO. The 1Y1005 will.
QUESTION: Do you have to remove the rear fender.Can't you just relocate the license plate on th 2005R1?
ANSWER: It's called a fender eliminator. Why would you want to keep it?
QUESTION: can you intergrate the turn signels into the brakelight.
ANSWER: Our Assimilator does not work with this tail light. There are after market tail lights w/ built in turn signals.
QUESTION: Will it fit the 2005 R1? Does the kit come with plugs for the holes the existing unit will leave?
ANSWER: Yes. Yes, it's a COMPLETE kit.
QUESTION: DOES THIS FENDER ELIMINATOR KIT FOR THE 2004 YAMAHA R1 INTERFERE WITH ANY AFTER-MARKET SLIP-ON EXHAUST SYSTEM?
ANSWER: Haven't had any complaints of it.
QUESTION: Does this kit fit the 05 R1 and I'm also looking for frame sliders ?
ANSWER: yes, it fits. we don't manufacture sliders.
QUESTION: I'm interested in this fender eliminator kit, but I do not need the turn signals. I currently have a intergrator tail light system on my 2005 R1.
ANSWER: Only kits purchased through Competition Werkes can be modified.
QUESTION: OK boys... Get moving and make one for the FJR1300!!! And while you're at it do a rear wheel hugger mudguard for same.
ANSWER: Why you won't see under those gigantic side bags? Sounds like you need two bikes!
QUESTION: checking out the r1 undertail. how soon after the new 2005 r6 comes out will you have fender elim for it?
ANSWER: Ussally 3-5 weeks
QUESTION: Is the lic plate light bulb replaceable ? and if so how do you get to the bulb.
ANSWER: The bulb is just an 12v light shouldn't be that hard to find. You'll need to replace the two sided tape once removed.
QUESTION: those come with the turn signal
ANSWER: Yes, rear signals are included!
QUESTION: Hard to tell....is the plate still illuminated? Is there any possible chance of tire contact? Almost sold.
ANSWER: Yes, This kit comes w/ a new lic light. There are no clearence prob's.
QUESTION: are these lights very visible in the middle of the day?
ANSWER: they are not as bright as the stock signals. they are visible, but how visible would be hard to say.
QUESTION: Any better pictures? After all this is a cosmetic upgrade.
ANSWER: no.
QUESTION: Is there anything about this kit that could make the bike unable to pass inspection?
ANSWER: Depends on the state, in most states there are no inspections
QUESTION: Will this kit work with the rear foot pegs removed completely?
ANSWER: Yes, but you'll need some new bolts
QUESTION: The turn signals in the picture are clear. Can the trun signals that come with this be amber? Thanks
ANSWER: Yes, We just need to know before shipping.
Ask your question here:
Your email (so we can send you the answer):
powered by
