Application Chart Diagrams
Application
2003 Suzuki SV 650
2004 Suzuki SV 650
2005 Suzuki SV 650
2006 Suzuki SV 650
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: hi i have already lowered my SV650S. if i change the links will it be lower? has been lowered 1 inch already...
ANSWER: if you lower it more then 1.5 inches it can be dangerous. You cannot lower it more
QUESTION: do you have a lowering link for sv650s 2008, is there one for another bike that would work
ANSWER: sorry we do not have any and you need one made for sv650s
QUESTION: is the RU27246 lowering kit for a suzuki sv650s 2006 year as strong as the standard suzuki kit.also how low does it lower the bike
ANSWER: The kit is strong, you can drop from 1 to 1.5 inches.
QUESTION: where are the mounting points?
ANSWER: you have to remove the original linkage and replace it by the shorter linkage (lowering kit)
QUESTION: Do you have a kit to lower the front of an 08 SV650S?
ANSWER: sorry not available
QUESTION: Do you have a kit to lower the front of an 08 SV650S?
ANSWER: sorry no kit available
QUESTION: another question re: lowering links. I have lowered my V strom 650 using STEEL links. I want to lower a Suzuki GS 500 but all I can find is aluminum:
1) aluminum seem much less strong that steel, how does this work ?
2) if the aluminum ones are thinker, how is this going to work ?
ANSWER: Sorry but you need to speak to a technician
QUESTION: DO YOU HAVE STEEL LOWERING LINKS FOR A SUZUKI GS500 ?
ANSWER: no
QUESTION: 2 questions please, will this kit (RU27246) fit my 2008 suzuki sv650 sf and does anyone offer an anodized aluminum equivalent?
ANSWER: this part is listed up to 2008 - do not know about anodized equivalent
QUESTION: So, are the lowering links for the SV linger than stock or shorter?
ANSWER: it is shorter
QUESTION: If I use RU27246 to lower my 2006 SV650S, will I have to get my kickstand shortened?
ANSWER: no you don't
QUESTION: do you guy have lowering kit to lower it 3" if do i need to lower the front and do some thing with the chain or what all do i need to do and what do i need to buy. thankz a lot for ur time
ANSWER: We have nothing that lowers the bike 3`inches, anything behond 1 to 1 1/2 changes the handling of the bike, and is not recomended.
QUESTION: I have a sv650s, how would I go about lowering the front? Can I just adjust the triple clamps?
Thank You for your time.
ANSWER: It is not recommended to lower the front only and to adjust the triple clamps if you do not have any mecanic competencies. It changes the handling and you could break your bike. We stronly advise you to have it done by a mechanic person.
QUESTION: what would i use to lower the front of my 03 sv650rx3?
ANSWER: You need to adjust the triple clamp on your bike, no extra parts needed.
Note that you need to have it done by a dealer not to ruin your bike and have the perfect adjustment
QUESTION: I have a 2001 Suzuki SV650s and short legs. What product(s) can I use to lower it? I note that if you lower the rear end only, the handling is affected. Is this the case if the front end is lowered also?
ANSWER: You can use this kit to lower your bike anf if you lower the rear end and the front end it will not affect the handling.
QUESTION: Ru27246 will I loose cornering ability with this kit? I wrote again cuz I forgot to put the kit number. Thanks
ANSWER: yes you will the handling will be different and it will affect the cornering ability also
QUESTION: will RU27246 work on a 2007 SV650 and what do you recomend to lower the front
Thanks,
Bob
ANSWER: Yes it will fit and if you want to lower the front you can do it
QUESTION: hi if i lower my sv 650 with this product will i need to lower the front of my bike too? thanks
ANSWER: It is better if you do so
QUESTION: Will this product fit an 07 SV650 ?
ANSWER: it should fit but on a Suzuki SV650S 2007
QUESTION: Will this fit the SV1000s?
ANSWER: No, these kits are model-specific and should only be used on the year make and models specified.
QUESTION: Item no. RU27246
for each order of this, is there one dogbone in the kit, or are there two?
thanks!
ANSWER: Each kit contains 2 steel dog bones
QUESTION: Do you have a lowering kit for an Aprilia RS50
ANSWER: We have no universal product to fit this bike
QUESTION: How much to post to the United Kingdom?
Thank you
ANSWER: The shipping information question would have to be directed to 1Tail
QUESTION: Dp you know if there is a lowering kit for honda 750 nighthawks, 1993 specifically, or a way to do it.
ANSWER: We have no lowering link for this bike, and can`t advise on any product that could help.
QUESTION: what are the advantages to lowering the rear end and will the rear shock need to be adjusted after lowering?
ANSWER: When the bike is lowered, the advantages for height are taken in consideration, but it is all a question of taste and the feel of the ride. You keep the same adjustments are far as the shocks are concerned.
Ask your question here:
Your email (so we can send you the answer):
powered by seo company
