Application Chart Diagrams
Application
2001 Suzuki GSX-R 1000 (K1)
2002 Suzuki GSX-R 1000 (K2)
2001 Suzuki GSX-R 600 (K1)
2002 Suzuki GSX-R 600 (K2)
2003 Suzuki GSX-R 600 (K3)
2000 Suzuki GSX-R 750 (y)
2001 Suzuki GSX-R 750 (K1)
2002 Suzuki GSX-R 750 (K2)
2003 Suzuki GSX-R 750 (K3)
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: i wanted to know is there a difference between suzuki gsx-r 600 and a suzuki gsx-r 750 other than the motor? i always thought the frame was bigger on a 750 >> confused <<
ANSWER: Not sure on frame but I know that the body panels on both are the same.
QUESTION: I HAVE A 2002 GSX-R 600 AND I WANTED TO KNOW IF ITS POSSIBLE TO TAKE THE FAIRINGS OFF AND PLACE THEM ON MY 2000 GSX-R 600
ANSWER: No, the bodywork is different on the 2000 GSX-R600
QUESTION: I bought a 2000 GSXR 750 with an undertail kit on it. The wiring is messed up somehow, the turn signal lights and the brake lights both come one when you hit the brake. Where can I find a wiring diagram for the undertail kit??
ANSWER: Below is a link to some instructions, there will be some wire diagrams towards the bottom of the page
http://www.hotbodiesracing.com/installdocs/70.pdf
QUESTION: i have a 2000 gsxr 750. if i order one of these undertail kits do i need to install a fender eliminator kit first or does this replace that?
ANSWER: This will replace that.
QUESTION: after installing mu undertail my brake lights don't work.
Any help???
Thanks
ANSWER: Test the brake lights against a battery
QUESTION: My brake light doesnt come on what could be the problem. All other features work besides that
ANSWER: Try hooking up the light to a battery if the brake light still doesn’t work give Hotbodies Racing a call direct.
QUESTION: What the main different between the 750 and the 600? Besides the motor. Is the body and size the same?
ANSWER: Yep bodywork is the same on both of those bikes.
QUESTION: my gsxr 1000 k2 got broken tail light mount and cracked stock undertail. does installation of your undertail require cutting stock undertail and if yes how far down will it need to be cut?
ANSWER: Yes it does require cutting. Below is a link to instructions
http://www.hotbodiesracing.com/installdocs/68.pdf
QUESTION: i own 2002 gsxr 600 does the taillight leds flash amber when indicating as required in UK?
ANSWER: Yes When you apply your turn signals the outside 3 LED’s will flash amber.
QUESTION: Is this the only undertail kit you make for an 2002 GSX-R750?
ANSWER: This undertail is the main kit we sell But we also offer part # S02GS-GP-BLU only in blue.
QUESTION: hi .. i have a gsx600f import (2002) how can i get thepaint code ? its not on the bike and color_ rite dont list the bike
ANSWER: Try double checking with your local dealer.
QUESTION: i have a 2001 gsxr 750, will a 2002 engine fit on it?
ANSWER: Check with a dealer.
QUESTION: What undertail kit can i get that i don't have to cut or modify? that will come in yellow or white for k1 gsx-r 600?
ANSWER: Sorry but for your bike there is no undertail that just bolts on. Every undertail requires cutting
QUESTION: i have a gsxr600 k3 alstare corona please could you advice me on the colours and if u can match it
ANSWER: Part # you need is S02GS-SB-PUR
QUESTION: can i get my rear tyre hugger 4 an 02 gsxr1000 painted
ANSWER: Yes the part # is S02GS-H2
QUESTION: does a 2003 750 engine fit a 2000 gsxr 600
ANSWER: No.
QUESTION: ineed wiring help gsx 600 factory wiring does not match instructions my brake lts wont work blinker and tail lts work can anyone help
ANSWER: For assistance with your wiring, please call the manufacturer at 800-555-2805 # 1 and a Hotbodies Racing tech will walk you through it.
QUESTION: HI. DO YOU SHIP TO NEW ZEALAND?. WHAT WOULD BE THE PRICE AND SHIPPING COSTS ON A TAIL PIECE TO FIT A K3 GSX 600R ALSTARE MODEL?
ANSWER: We do ship to New Zealand. Please order online. The shopping cart will charge you for shipping at checkout - about $40 extra.
QUESTION: Do you sale only suzuki gsxr 600 2003 undertail led turn lights with out the undertail? plese present the link for the led and price.
ANSWER: Sorry, but we do not sell our LED's separate.
QUESTION: My exhust is underneath the rear pass seat will this fit????
ANSWER: No because this undertail mounts to the tail and most likely will hit your aftermarket exhaust.
QUESTION: Does the undertail for a k1 1000 come with a place to mount indicators?
ANSWER: This undertail the signals are built into the tail light.
QUESTION: Is this undertail the only style that will fit on a 2001 gsx-r750?
ANSWER: for this model yes.
QUESTION: I already have the undertail, where can i find the clear intergrated tailights for a 2001 GSXR-1000?
ANSWER: Here are our taillights: http://www.1tail.com/sa/c/Turn_Signals_and_Marker_Lights.htm
QUESTION: I ordered the Hotbodies SBK 2 untertail does it come with the Flash Rate Controller Kit or do I have to order it seperately? Also do I even need it on my 2001 GSXR1000?
ANSWER: it does not come with the controller unit. If you want to slow down your blinker rate then yes you will need it other wise it will just flash quicker.
QUESTION: do you have any kits for a 99 katana 750
ANSWER: We do not have an undertail for your bike. We do have a fender eliminator kit. Search for Item #: 1S603.
QUESTION: In the kit that you supply to slow down the indercator speed, what size are these resistors?
ANSWER: The manufacturer has determined the size and has not published it. It is a simple calculation once you have obtained your Electrical Engineering degree. You will find that when you complete your calculations to restore the original impedance of the circuit with a parallel resistance and attempt to purchase 25 Watt resistors that they are more expensive than the kit. Spend less time calculating and more time riding your bike by solving the Flash Rate problem with our Flash Rate Controllers.
QUESTION: I was wondering if i were to get a tail section from a 01 gsxr would i be able to fit onto a 01 katana cause man i really want one of these undertails but i cant seem to find one for a 01 katana.?
ANSWER: Sorry, but I have no idea if the GSXR tail will fit on the Katana.
QUESTION: do i need a relay, for gsxr600 k2?
ANSWER: If you want your blinkers to flash like stock then yes. Flash Rate Controller Kit - Item #: RU35955
QUESTION: will the purple match the alstare purple (2003)gsxr600?
ANSWER: yes it will match.
QUESTION: will this fit my gsxr 600 k1 from UK heard there is a difference between US and european bikes???
ANSWER: It should fit fine.
QUESTION: will u ship to the uk? how much? are the LED's used thwe "super bright" type?
ANSWER: Starts at $39 USPS Global Express. Add about 2-3weeks for delivery. the LED are standard. We do recommend a flash rate controller to set the speed of the blink.
QUESTION: where do i find the paint code for my 2003 gsx-r600? I have some scratches on my tank on want to fix. i have the blue and white model.
ANSWER: Check www.color-rite.com
QUESTION: Do the lights act as reflectors, AS THIS IS REQUIRED IN THE UK?
ANSWER: These lights are turn signals only.
QUESTION: do you have the tail fairing for a 2002 gsxr 750 in the black red and silver scheme just as the same colors of the defualt bike pic on your undertail website?
ANSWER: This is just the undertail part, not the whole tail section. We do not carry any painted OEM bodywork.
QUESTION: I have a 1/2 inch gap between the seat and the tail. On the instructions, I cant see how to get that gap closed?
ANSWER: Basically what you do is re-install your stock tail light bolts and then use zip ties from the bolts to the top of your subframe and that will bring up your tail section.
QUESTION: Will the blue match a 2002 blue and silver 600 gsxr, not sure if the blue is the same as the telefonica blue ? and can it be shipped to canada
ANSWER: This blue we offer is the CAndy Grand Blue, which is the Telefonica blue. T obe sure, check for the color code on your subframe, it is YC2. Yes it can be shipped to Canada. This shipping price will be in the total before you enter your payment info.
QUESTION: After installing the undertail kit my turnsignals flash a lot faster, do you have a recommended solution like a loaded relay to replace the stock relay or just a resistor inline with the signals. I have an 03 GSXR600.
ANSWER: you would need to get a resistor to slow down the blinker rate.
QUESTION: I have the 2002 GSXR 750 stock paint scheme, will the telephonica blue match the blue on the top of my gas tank?
ANSWER: The undertail will match your bike.
QUESTION: will the blue color match a 02 telefonica edition blue?
ANSWER: Yes it will match.
QUESTION: I already have custom blinkers in the side of my tail. will these be affected by this undertail kit.
ANSWER: Your blinkers should not be affected. If anything they both will blink.
QUESTION: can i see a sample of the colors? well more specifically the purple. i have the 03' alstare. official corona team edition. will it match up with the purple on the stock tail? if it does not will the yellow match up with the yellow they used on that model?
ANSWER: We don't have a picture but yes, the undertail color will match perfectly.
QUESTION: You are wrong about cutting the frame. You have to cut the net hooks off of the subframe. If I remember right, you also have to cut about 1 1/2 inches off of the back of the trunk. My question is, are the leds brighter than they were in '04? Because I constantly have people locking up their brakes behind me because they cant see my brakelights or my signals. I have the GP with the chrome backing and clear lens.
ANSWER: The lights are brighter and they have a different lens on the tail light.
QUESTION: Does the undertail utilize the two holes in the tail section where the original light is connected?
ANSWER: you will use the 2 holes that were already on the tail section to mount the undertail. also towards the bottom of the tail you will have to drill two holes for the bottom.
QUESTION: Is this style undertail available for 2000 GSC-R600?
ANSWER: sorry not for the 00 gsxr600.
QUESTION: HEY ITS ME AGAIN,I 4GOT TO ASK YOU,WILL THE FACTORY PASSENGER FIT BACK ON THE CORRECT WAY,USING THIS PRODUCT.
ANSWER: this is just the undertail part not the whole tail section.
QUESTION: YES I HAVE A 03 750,AND IT IS CHARCOAL IN COLOR,IF I ORDER THE WHITE TAIL WILL IT BE EASY TO GET IT PAINTED CHARCOAL.
ANSWER: to get it repainted all depends on your painter because you will have to sand it and primer it again..
QUESTION: Will this model fit a 1999 suzuki 750.With some cutting maybe??
ANSWER: sorry but that undertail will not fit. The rear tail section is totally different.
QUESTION: will this fit 01 gsxr 600
ANSWER: Yes, as stated in the product description and the application guide in the product detail, this product is made for the 2001 GSX-R600.
QUESTION: WHEN DO YOU THINK YOU WILL HAVE THIS STYLE FOR 04 GSXR 75O?
ANSWER: We are not going to make that style for the 04 GSXR750 because of the LED brake light.
QUESTION: Hay, dose this model fit a 2005 GSX 600 katana
ANSWER: No it does not fit the Katana they are totally different.
QUESTION: Do you lose your trunk?
ANSWER: no you do not loose your trunk.
QUESTION: Wiil this model fit a 2000 Suzuki GSX-R600. Need in BLACK.
ANSWER: No, it will not fit the 00 GSXR600.
QUESTION: Is this style undertail available for 2004 GSX-R600?
ANSWER: No this style is not out for the 04 GSX.
QUESTION: Hey,
I need the dimensions for this the undertail. I'm trying to modify a solo tail and I'm hoping this will work.
Thanks
ANSWER: It is about 14 1/2 wide and almost 27 inches long.
QUESTION: Do you have to do any cutting on the frame for this kit?
ANSWER: You do not have to cut the frame. You only cut the glove box.
QUESTION: Do you have a picture of one with a license plate mounted?
ANSWER: We don't have a picture for you but here is a link to the Hotbodies site that shows what the brackets look like. You just choose a spot on the tail and drill it. Here is the link.
http://www.hotbodiesracing.com/license_plate_mount.php4
Ask your question here:
Your email (so we can send you the answer):
powered by
