UNIVERSAL RISERS, 1'' BAR STYLE, 1'' UP - HONDA'S ONLY
The H121 risers fit Honda 1" diameter tube style handle bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.
Item no. H121
Today$65.95
Fits:
Magna - All years
Pacific Coast - All years
Shadow - All years
Valkyrie - All years
VTX1300 - All years
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: i have a 86 honda magna and wanted to put drag bars on it will these risers work for that
ANSWER: If you magna has 1" bars the H-121 risers will work with drag bars. If your bike has 7/8" bars, our X-103 risers will work. The risers will help keep the controls from hitting the gas tank when using drag bars.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Do you have a set of 1" risers to fit a ST 1100, if so can you give me a price incl shipping to post code CO5 OUH in the UK.Thank you.
ANSWER: Our X-103/X-104 1" risers will fit the ST1100.
QUESTION: I have a 2001 yamaha venture and would like a set of 1" risers my bar is a 1" and i only want a 1" rise will this work. if not which one thanks Emmett
ANSWER: Hi Emmett,
We currently only carry the Y-122 risers for the Venture which are 1 1/2". The H-121 risers will not fit the bolt hole spacing.
Thank you,
Scott-genmar
QUESTION: will these risers give any pullback on a 1999 honda magna 750? if so a 1 inch in height and __ pullback? otherwise do you know of any pullback risers that fit? Also are any of your highway bars made to fit my bike? thanks a bunch
ANSWER: The H-121 risers will give you about 1/2" pullback on the 99 Magna 750. We currently only carry the one riser for the Magna.
Thanks for the inquiry,
Scott-Genmar
QUESTION: I have 89 1500 goldwing converted to a trike i need to get the bar back more. will a set of these fit my bike. what i measured on the cup was 1 & 16th inches.If they will not work could you help me locate a pair.Thanks Lester Duke
ANSWER: Hi,
The H-121 risers will fit the honda bolt pattern with 1" handlebars.
Thank you,
Scott-Genmar
QUESTION: will the h121 risers fit 2005 honda vtx 1300R thanks
ANSWER: The H-121 risers will fit the 05 VTX1300R.
Thank you,
Scott-Genmar
QUESTION: Hi..
Can you inform me of shippingcosts to Denmark please?
Thanks a lot..
ANSWER:
QUESTION: G/Day Mate!, I would like to order a set of the H121 Risers for my 2007 VTX1300S. How much is postage to Australia? Post code is 3463 Maldon Victoria Australia.
ANSWER:
QUESTION: The H-121 risers fit the earlier years of the Shadow Spirit VT750DC, but not the '07? What gives?
ANSWER: The H-121 risers will fit some of the 07 Shadows. If your bike has a one piece handlebar and riser set-up, the H-121 risers will not work. If the handlebars and the stock risers are seperate, then the H-121 risers will work.
Thank you,
Scott-Genmar
QUESTION: Will these fit the 2001 Honda Shadow Spirit 750CD with the stock set-up?
ANSWER: The H-121 risers will fit the 01 Shadow Spirit 750.
QUESTION: Will these fit the 2007 Honda VT750C2 Shadow Spirit? Thank you.
ANSWER: The H-121 risers will fit the 07 VT750C2 without any changes to the control cables.
QUESTION: Greetings,
Wife has a 2003 Honda Shadow Sprit
VT750DC, is this the correct product for her bike ? Thanks for assistance.
ANSWER: Hi,
The H-121 risers are correct for the Honda Shadow VT750.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I READ THE H-121 WILL WORK ON THE 06 VTX1300R. IT HAS A 1" RISE IS THERE ANY PULL BACK? I WOULD LIKE PULLBACK WITH OUT HAVEING TO MODIFY CABLES. WHAT IS YOUR SUGGESTION PLEASE
ANSWER: Hi,
Because of the angle of the stock risers, you do get about 1/2" of pull back with the H-121 risers. You will not have to change any control cables.
Thank you,
Scott-genmar
QUESTION: i wanted to make sure as to which part number will work on a 2004 honda VLX 600 deluxe, to give me some movement up and back on my bike to reduce my arm ache
ANSWER: Hi,
The H-121 risers are the correct risers for the 2004 Honda VLX600.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Does H121 come in black anodized?
My cycle is Honda 750 Aero 2004
ANSWER: Hi,
We can make the H-121 risers in black. We don't stock them in black but can have you a black set in a couple days if we have the H-121 risers in stock.
Thank you,
Scott-Genmar
QUESTION: are there handlebar risers available for a 1988 Honda Hurricane (cbr)?
ANSWER: Hi,
Our H-116 risers will fit on the 1988 Hurricane.
Thank you,
Scott-GenMar
QUESTION: Thanx for your prompt response, I'll order a set on-line. Second question: I also have a 1997 Honda ST1100. Do you manufacture a riser set or system for this bike ? If yes, please inform me of your part # so that I can order it for my ST1100 as well.
ANSWER: Hi,
We do offer a riser for the ST1100. The risers are our part #X-103 and will raise the bars up 1" and back 3/4" due to the angle of the stock risers. Both items are in stock and ready to ship.
Thanks again,
Scott-GenMar
QUESTION: Hi Scott,
H121 Risers: I have a 1995 Pacific Coast. The bar on the clutch side measures 7/8", but you say H121 fits all PC's. Am I missing something or just plain dumb ? I'd like to buy a set. Pleaser advise.
Charles, Calgary, Canada
ANSWER: Hi,
The bars on the PC are 1" at the mounts and taper down to 7/8" at the bar ends. This part of the bars is under the plastic cover and not visible.
Thank you,
Scott-Genmar
QUESTION: Hi There!!! I have a 2000 Honda Shadow A.C.E. and i want to make sure of the part number to use 1 in. risers. Thanks P.J.
ANSWER: Hi PJ,
The H-121 risers are the correct risers for the 2000 Honda Shadow.
Thanks for the inquiry,
Scott-Genmar
QUESTION: i have a magna and would like the spacer to be 2 inches
ANSWER: Hi,
We ocassionally can fit in custom orders. Call us at 877-471-1515 and we will let you know if we can work a set in.
Thank you,
Scott-Genmar
QUESTION: Looking at the product I had asked about, what is the bore centerline for that piece, the universal honda riser.
Thanks for our help. I need to get these bars higher.
ANSWER: I'm not clear what measurement you are looking for.
Thank you,
Scott-GenMar
QUESTION: I know that you do not list for this bike, but I believe a unit from another bike would work.
This bike uses a clamp type 1" tube mount. The bars are straight across at the mount. The Suzuki Velusia appears to be a straight across mill on the trough for the tube. I am hoping that I can make something work. The bore for the bolts would be the main issue. What is the center to center boreline for the Velusia's risers.
I am not concerned about the cosmetics of the thing as there is a shroud that covers this area.
ANSWER: Hi,
The bolt hole spacing for the S-126 Volusia risers is 1 1/2".
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have an '86 Goldwing. 1" tube at mount. I would like a 1.5" - 2" up. What do you have?
ANSWER: Hi,
We currently do not offer a riser for the 86 Goldwing. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Before I purchase, I want to be absolutely sure this item will fit my VT750DC Honda Shadow Spirit 2002, and that I will not have to redirect/change out any cables.
ANSWER: Hi,
The H-121s will fit your 02 VT750DC Shadow. You will not have to re-route or lengthen any of the control cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Do you have a handlebar riser in silver that fit's a Honda 919, 2007? Also, do any modifications need to be made such as lengthening the brake, clutch or throttle cables? Or, do I simple add your riser on without any modifications.
ANSWER: You can use our X-103 risers without any modificatons. You also can use our X-102 risers on the 919 but you will have to perform some simple re-routes. However, you will not have to lengthen any of the control cables with either model.
Thank you,
Scott-GEnmar
QUESTION: Will the H121 fit a VTX1800C. I only want 1 inch of pull back. Thanks, DAvid
ANSWER: Hi David,
The H-121 risers will not fit on the VTX1800C. The bolt hole spacing is different.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Before i order will you verify these risers are compatible with a 2007 honda shadow spirit VT750DC? thank you, lpj
ANSWER: Hi,
We currently do not offer a riser for the 07 Honda Shadow Spirit VT750DC. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have intstalled one of your riser's on my wifes Spirit 750 '02 year, can I put another one on top of the existing one? She wishes it to be a little farther back. If I can do you provide the longer bolts? Thanks
ANSWER: Hi,
You can stack two sets of the H-121 risers together. However, you will have to re-route some of the control cables. We do carry the longer bolts needed.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will the H121 risers work on my 2007 Honda Shadow Spirit VT1100C? Should they reduce backache?
ANSWER: Hi,
The H-121 risers will work on the 07 VT1100C. They will sit you up straighter and reduce the backache between you neck and shoulderblades.
Thank you,
Scott-GenMar
QUESTION: hi i would like some risers for 1985 vt1100 shadow, can you give me a total price including shipping to the u.k.?
Andy
ANSWER:
QUESTION: Hi,
Will these fit the Honda Super Magna 1987? The bars are different than the older Magnas and the newer ones. If they fit, is there any modification needed as far as the cables, etc.? Thanks.
ANSWER: Hi,
The H-121s will fit on the Super Magna but not the 1994 Honda VLX.
Thank you,
Scott-Genmar
QUESTION: i looking for a windscreen for my honda shadow
vt1100 year1985
greatings from holland
gys
ANSWER:
QUESTION: I have a honda VTX1300R 2006. Will the H-121 risers fit properly without moving any cables.
ANSWER: The H-121 risers will fit the 06 VTX1300R without any changes to the control cables.
Thank You,
Scott-GeMar
QUESTION: Want to put risers the come up at least 2" and back a little on a 83-86 v-65 Magna so I can put a handlebar on that is a little straighter. It would be perfect if I could use a 1" bar
ANSWER: Hi,
We currently only carry a 1" riser for the 83-86 magna and it is for a 7/8" handlebar.
Thank you,
Scott-GenMar
QUESTION: will they keep the handlebar tight enough so it will not move
ANSWER: The handlebars will be just as tight as stock when installed properly.
QUESTION: Can I use the universal 1” risers on a 95 cbr900rr. If not, do you have anything that I can use?
Thank you,
David Leonard
ANSWER: Hi,
We currently do not carry a riser that will work on the 900rr. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Do these risers work with the plastic handlebar covers on the Pacific Coast? Any special modifications to get the plastic to still fit? (Especially the center plastic piece at the base of the handlebars)
ANSWER: Hi,
The plastic cover will attach as normal and have a 1" gap on the bottom. The key hole is recessed slightly but still accessible. No modifications are necessary.
Thank you,
Scott-GenMar
QUESTION: What is the maximum height I can use for my Honda Pacific Coast without changing cables? Is 1" all I can get?
ANSWER: Hi,
You may be able to get a little more than 1" on the PC but it puts a big gap under the plastic cover.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a 2002 VT1100 Sabre and an aching neck!!! I think the 1" raise is good, but I'm not sure the pull back is enough. Is this the only riser you offer for my bike? Please advise & thanks in advance for your time
ANSWER: Hi,
We currently only offer the H-121 risers for the Sabre. The 1" riser is about all the cables will allow.
Thanks for the inquiry,
Scott-Genmar
QUESTION: What is the metric bolt size for the stock risers and distance between them from center to center. For a 2005 honda shadow saber, please help. Thank-you
ANSWER: The stock bolts are 8mm with a 1.25 thread pitch. The bolt hole spacing is 1 3/8".
QUESTION: How much pullback do your risers provide. I am looking for as much as possible with stock bars and I don't want to change out my cables. At this point given the limited products for this any pullback beyond 1.5" would be good. Please advise. Takce care.
ANSWER: Hi,
The H-121 risers are going to give you about 3/4" pullback due to the fact that they sit on the same angle as the fork tubes. Depending on the specific model of bike you ride, this may be as much as we can get for you.
Thank you,
Scott-GenMar
Ask your question here:
Your email (so we can send you the answer):
powered by
