UNIVERSAL RISERS, 7/8'' TUBE TYPE HANDLEBARS, 1'' UP & 1 3/8'' BACK
The risers replace the stock 7/8" tube type handlebar clamp-cap to raise the bars up 1" (25mm) and back 1 3/8" (35mm). This will help to relieve wrist and neck pain on long rides. May require some re-routing of control cables, wiring, or hoses. X102B is the black anodized version of X102. Does not fit 1" tube handlebars.
Item no. X102
Today$110.95
Application Chart Diagrams
Application
2001 Suzuki DL 1000 VStrom
2002 Suzuki DL 1000 VStrom
2003 Suzuki DL 1000 VStrom
2004 Suzuki DL 1000 VStrom
2005 Suzuki DL 1000 VStrom
2006 Suzuki DL 1000 VStrom
2007 Suzuki DL1000 VStrom
2002 Suzuki DL650 VStrom
2003 Suzuki DL650 VStrom
2004 Suzuki DL650 VStrom
2005 Suzuki DL650 VStrom
2006 Suzuki DL650 VStrom
2007 Suzuki DL650 VStrom
Fits:
BMW R1150R, 1100GS
Honda
Kawasaki, ZR-7 (will require a longer brake hose, not included), ZRX1100
Suzuki, GS500, SV650-2003, V-Strom
Triumph, Speed Triple, Thunderbird
Yamaha Virago, etc.
WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.
The Q&A on this Product
QUESTION: Ihave a suzuki 2006 gsx750f.Iam told there is no one who makes them for that bike,would you know if there is something else that will do the job for me.
ANSWER: You might look into a conversion kit that will allow you to use conventional type handlebars.
Thank you,
Scott-Genmar
QUESTION: will these risers work with a suzuki drz400
ANSWER: The X-102 risers will fit on the DRZ400 without any changes to the control cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hello.
Can you please tell me how much a Yamaha riser kit for my Yamaha Diversion 900 (item no .X102) would be including how much extra shipping to the United Kingdom.
Many thanks
Kevin Brooks
ANSWER:
QUESTION: Do you have handle bar riser for Yamaha xj900s diversion yr2003
ANSWER: Hi,
Our Y-121 risers are the same as the X-102 risers but in a silver finish for the Diversion. The cost is the same as the X-102s.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Hi,
can you confirm that there will be no cable problems with the X-102 on a 97 Yamaha Diversion 900.Do you ship to UK
Thanks.
ANSWER: Hi,
You will not have to change or re-route any of the control cables on the Diversion 900. We do ship to the UK daily.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will your risers fit on an '05 Bonneville America
ANSWER: Hi,
Our X-102 risers will not fit the Bonneville America. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Yes will these fit a 2009 F800GS? Thanks Kerry
ANSWER: Hi Kerry,
We have not had a chance to try the X-102 risers on the 09 F800GS. You might check back in 2-3 weeks.
Thank you,
Scott-GenMar
QUESTION: I want to buy a SV 1000 S, but I also want to raise the handlebars up and back. Will these risers work?
Thanks,
Cindy
ANSWER: Hi Cindy,
We currently do not offer a riser for the SV1000S. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Scott, you said the x102 risers would fit a 2008 suzuki GSX650F. But is there
any brake or throttle line changing. Thanks Andy
ANSWER: Hi Andy,
You do not have to change the contol cables but you will need to remove them from any zip-ties or routing brackets to get the slack you need. It is a very simple modification.
Thank you,
Scott-GenMar
QUESTION: Hi ,can I purchase this style riser with this hieght and back gain for a bonneyville ?
ANSWER: Hi,
We currently do not offer the up and back style riser for the bonneville. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Will the risers fit an 06 GS500f
ANSWER: Hi,
Our X-102 risers will fit the 06 GS 500.
Thanks for the inquiry,
Scott-Genmar
QUESTION: I need a riser for 2008 ninja ex650r a 1" or a 2" or some thing near to that thank's.
ANSWER: Hi,
Our K-114 risers will raise the bars up 1 1/4" on the 08 Ninja 650R without changing the control cables.
Thank you,
Scott-GenMar
QUESTION: Do you have a handlebar riser to suit a 1996 Suzuki 750F? If so how much are they - including shipping to Australia?
Thankyou, Bruce Hoffmann
ANSWER: Hi,
We currently do not carry a riser for the 750F. Sorry we coudln't help you out.
Thank you,
Scott-Genmar
QUESTION: Will the X102 fit a 2006 Honda 919 without cable and or hose replacement?
ANSWER: Hi,
The X-102 risers will fit the 919 without any changes to the control cables. You may have to remove wire ties to get a little extra slack in the cables but no re-routing or replacing of the cables.
Thank you,
Scott-Genmar
QUESTION: will the x102 risers work for a 2004 honda 919/cb900f
ANSWER: Hi,
The X-102 risers will fit on the 04 919.
Thanks for the inquiry,
Scott-Genmar
QUESTION: I received email ref 1 inch riser #Y122 for a 2007 Yamaha V-Star 650 classic, but also need a little pull back as well as rise. Please advise if your universal X102 will fit and not hit gas tank when fork is at full lock.
ANSWER: The X-102 risers will not work on the V-Star. The Y-122 risers will raise the bars up 1 1/2" and get them back 7/8".
Thank you,
Scott-Genmar
QUESTION: I have a 2008 Suzuki GSX650F. Which risers if any will fit?
ANSWER: Both our X-103 and X-102 risers will fit the 08 GSX650F.
Thank you,
Scott-Genmar
QUESTION: Hi, I have a 2001 zr7s, I know the universal risers will work but do you also sell the extended brake lines? Thanks
ANSWER: We do not carry the brake line for the ZR7S. Sorry.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Hi will these fit my Ducti S4R-07 Monster
ANSWER: Only our D-100 risers will fit the 07 S4R.
Thank you,
Scott-Genmar
QUESTION: Hello - What barback risers do you offer that will fit my 1996 BMW K1100RS. I am hoping not to have to change any cabbles or the brake hose, but will consider ant risers that willfit this motorcycle. Thanks for any info! Kind Regards - Steve Kurylo Weare NH - USA
ANSWER: We currently do not offer a riser for the K1100RS. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hi Scott,
I would like to know if either the X102B or the X102 woill fit a 1989 Honda Hawk gt 650?? Thanks
ANSWER: We currently do not offer a riser that will fit on the Honda Hawk. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Will the x102 fit a 2007 Honda VTX1300R? Will it hit the instrument cluster on the tank? Will cable changes be necessary? THX
ANSWER: Hi,
The X-102 risers will not fit the VTX1300R.
Thank you,
Scott-GenMar
QUESTION: I have a Suzuki 2007 1000 v -strom.Will I need any new cables or hoses if I use your risers.also what risers will fit my bike.Thanks alot,
ANSWER: You can use the X-102 or X-103 style risers on the V-Strom 1000. Neither model will require that you reroute or change any of the control cables.
Thank you,
Scott-GenMar
QUESTION: I own a 2007 gsr 600 and i am not able to enjoy by bike as i feel the handle bars are beyond my reach,can u please help to have the handle bars at a reacheable distance for me.can u please provide me with pictures.thank you
ANSWER: Hi,
We currently do not offer a riser for your bike. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: will the handle bar size 7/8" not hit the tank if move left or right if this UNIVERSAL RISERS 7/8" TUBE TYPE HANDLEBARS 1" UP & 1 3/8" BACK will install on yamaha dt 125cc?
ANSWER: Hi,
The X-102 risers will fit the Yamaha DT125 without hitting the tank at full lock.
Thank you,
scott-genmar
QUESTION: Hi looking to put a set of these on a suzuki bandit. I beleive I need the part # S-121a for this. Do you supple these? Also how much is postage to australia?
Thanks Rick
ANSWER:
QUESTION: will theese fit a honda st1100 1991
ANSWER: Hi,
Only our X-103 and X-104 risers will fit the ST1100. The X-102 style will just barely hit the tank and full lock.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Good day to you. I'm interested to know if your "universal risers" will fit a early 70's Moto Guzzi. It has 7/8" bars but I can't tell if the machined holes /spacing etc. will work.
Thanks in advance.
Regards,
Howard Burton
ANSWER: Hi Howard,
The bolt hole spacing for our X-102 risers is 1 3/8". The holes are slightly elongated to allow a small bit of flexibility with the spacing. We don't have any pre 1990 Guzzis on our computer. I apologize for the lack of information.
Thank you,
Scott-Genmar
QUESTION: Sorry, me again. I just asked a question re: KLX300R. I have now read above that there appears to be conflicting measurements given. In one reply you say that the bolt hole spacing for the X102 will fit a 32mm spacing, while in another you say the bolt hole spacing is 1 3/8, which according to me is closer to 35mm? Can you please clarify and let me know if these will fit on a KLX300R, as I'm pretty keen to order if they fit. Regards Stan.
ANSWER: Hi Stan,
The bolt holes are elongated which is what makes them universal. Both measurements are correct because the bolts can be moved slightly to fit different bikes.
Thank you,
Scott-GenMar
QUESTION: Do your X101 risers fit a 2008 Bandit 1250S with ABS? and do I need longer brake lines?
ANSWER: You will not need a longer brake line on the 08 Bandit 1250. The riser you need is part # S-121a . It is the bandit risers without the brake line.
Thank you,
Scott-Genmar
QUESTION: will the x-102 riser fit a 2007 bmw r1200r?m
ANSWER: Hi,
The X-103/X-102 risers will fit on the 07 BMW r1200r.
Thank you,
Scott-GenMar
QUESTION: Hi Guys, I have a couple of questions. Will the X102 fit my Honda CB750 F2, circa 1978,without the need to buy extended brake hoses? Also, I cannot see the use of more than one allen screw, used on the lower fitting in the photo. Surely there are 2? Thanks.
ANSWER: The X-102 risers will fit on the 1978 CB750. Each riser will have two bolts fastening it to the triple-clamp.
Thank you,
Scott-GenMar
QUESTION: Will these risers fit a 2007 Triumph Scrambler 900?
ANSWER: The bolt hole spacing on the scrambler is different than the X-102 pattern and will not fit.
QUESTION: I have a 1978 BMW R80. Will the X102 fit this bike? It looks correct based on your dimensions (ANSWER: The bolt hole spacing is 1 3/8" and the bolts are 8mm with a 1.25 thread pitch. Thank you, Scott-GenMar) How long are the bolts.
ANSWER: Hi,
The X-102 risers will fit the 78 BMW R80.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hello will the X102 fit a 76 KZ900 with 7/8" handlebars?
ANSWER: The X-102 risers will fit the 1976 KZ900.
Thank you,
scott-genMar
QUESTION: X102...will these risers work on a Honda XR650L in a up and FORWARD positioning of the handlebars??? TIA
ANSWER: We typically don't install them in a forward position. If you have 1 3/8" clearance forward the X-102s will work.
Thank you,
Scott-GenMar
QUESTION: Hello. I need handlebar risers for my Triumph
Daytona 04 955i. Do you have any that will fit my model? Please advice.
ANSWER: Hi,
We currently do not offer a riser for the 955i. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will the x102 work on a 2000 R1?
ANSWER: Hi,
Our X-102 risers will not work on the R1.
Thank you,
Scott-GenMar
QUESTION: hi, i have a 82 honda cb900c and was wondering if you could tell me if the universal riser (1" up and 1 3/8" back) would work on it? my mounting bolts are approximately 32mm on center and it has 7/8 handlebars. i would really love to know the center to center measurements on your risers to aid me in making my decision. thanks for any help, sincerely mark9hi, i have a 82 honda cb900c and was wondering if you could tell me if the universal riser (1" up and 1 3/8" back) would work on it? my mounting bolts are approximately 32mm on center and it has 7/8 handlebars. i would really love to know the center to center measurements on your risers to aid me in making my decision. thanks for any help, sincerely mark
ANSWER: Hi,
The bolt hole spacing for our X-102 risers is 32mm. They will fit your CB900C with 7/8" handlebars.
Thank you,
Scott-GenMar
QUESTION: Will these fit on a Kawasaki Z750S?
ANSWER: Hi,
Only our K-100 risers will fit the Z750S. The X-102 risers are for 7/8" handlebars.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hi looks like just what i've been looking for my 1997 Yamaha XV1100 Virago.
How much in Australian dollars including shipping & handling to Armidale New South Wales 2350 Australia please ?
Regards Garry gerke
ANSWER:
QUESTION: Is the middle bolt on the handle bar risers long enough to screw into the back hole on the original handle bar mount? From the photograph it did not appear to, but from a security point of view I thought it would. Regards, Greg
ANSWER: Hi Greg,
The middle bolt does go through the riser and into your top triple-clamp. You will have 4 bolts mounting the risers securely to the bike.
Thank you,
Scott-GenMar
QUESTION: Q: WILL THE UNIVERSAL RISERS 1"UP&1 3/8"BACK FIT MY 2006 FZ6?
A: The X-102 risers will fit on the FZ6 but you will have to install a longer brake hose.
WHICH BRAKE HOSE WOULD YOU RECOMEND AND HOW MUCH DOES IT COST?
ANSWER: We currently do not offer the required brake hose for the FZ6. You will need a hose the stock length plus 2".
Thanks again,
Scott-genmar
QUESTION: WILL THE UNIVERSAL RISERS 1"UP&1 3/8"BACK FIT MY 2006 FZ6?
ANSWER: Hi,
The X-102 risers will fit on the FZ6 but you will have to install a longer brake hose.
Thank you,
Scott-Genmar
QUESTION: I have a 2004 BMW R-1200CLC. Will these risers fit it?
ANSWER: Hi,
Our risers will not work on the 04 R-1200CLC. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Can you advise if the risers will fit a Year 2001 BMW R 1100RT.
Thanks
ANSWER: Hi,
We currently do not offer a riser that will work on the 01 R1100RT. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a 2001 ZX7R and as mentioned in a previous question can not locate the picture of a zx7r with the installed riser. I looked under the www.genmarmfg.com universal riser section. I am very interested in this product.
Thank you for your time.
ANSWER: Hi,
We currently do not offer a riser for the ZX-7R only the ZR-7. Sorry we couldn't help you out.
Thank you,
Scott-GenMar
QUESTION: Can you tell me if the X102 will fit my 2001 fz1 and does the kit come with the front brake hose?
ANSWER: Hi,
The X-102 risers will fit the 01 FZ-1. However, you will need to install a longer brake hose that we do not supply with the risers.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Do you know if your up-and-back risers will work on a 2007 BMW R1200GS?
ANSWER: Hi,
Our X-102 risers will not work on the 07 R1200GS. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a 2007 fz1. I see above how you told someone with a 2006 fz1 that they need a longer brake cable. What about the clutch cable? Also,
where do you get the cable(s and how much do they cost? Thanks
ANSWER: You will only need to change the brake hose when putting the X-102s on the FZ-1. There is enough slack in the clutch. We get our brake hoses from Galfer Brakes and the cost vary depending on what you want.
Thanks for the inquiry,
Scott-Genmar
QUESTION: My bike is a 1984 K100RS, not K110RS. Does this work?
ANSWER: Hi,
Our X-102 risers will not work on the K100RS.
Thanks again,
Scott-GenMar
QUESTION: Will these fit a 1984 BMW K110RS?
ANSWER: Hi,
We currently do not offer a riser for the K110RS. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Will these fit my 1993 R100GSPD?
ANSWER: Hi,
Our computer files do not list the R100GSPD. If your bike has 7/8" diameter handlebars and the bolt spacing on the handlebar clamps is 1 3/8", then they should work. Sorry we don't have more information for you.
Thanks for the inquiry,
Scott-GenMar
QUESTION: 2006 GS500f Suzuki, which riser model is it?
ANSWER: Hi,
You can put either the X-102 or X-103 risers on the GS500.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will the X-102 risers fit a 2001 Bandit 600? I already have a longer brake so I don't need the S121 model.
ANSWER: Hi,
You can order the S-121 risers without the brake line. The risers without the line are just our part # S-121a. They are the same cost as the X-102 risers but are sliver to match the bike.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I HAVE A 2003 CB750 NIGHTHAWK AND WONDER IF YOUR RISERS WILL WORK WITHOUT CABLE CHANGES.
ANSWER: Hi,
The X-102 risers will fit on the 03 Nighthawk without any changes to the control cables necessary.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will you be able to provide a 1" up 1 3/8 back, handle bar lift for a, 2006 Yamaha Stratoliner.
1900 cc. I have been getting bad neck pain on even short rides. Thankyou Ed.
ANSWER: Hi Ed,
We only offer the Y-127 risers for the Stratoliner. They will raise the bars up 1 1/4" and back about 3/4" due to the angle. This is currently the only riser we offer for the Stratoliner.
Thanks for the inquiry,
Scott-GenMar
QUESTION: hi would you have risers for my yzf 1000 yamaha 1996 model.if you dont could you ged me a pair and how much.thanks mark.
ANSWER: Hi,
We currently do not offer risers for the YZF1000. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have CR Pro Taper bars on my 2003 DL1000. Do you make a riser similar to the X102 that will accept 1" bars? Thanks.
ANSWER: Hi,
We currently do not offer a riser that is compatible with Pro Taper bars. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hi Scott. I have a 2006 Yamaha FZ1. Will the riser Item no. X102 fit my bike with out a differant brakeline? I am also going to lower the bike 1 inch front and rear. Thank you. Brian.
ANSWER: Hi Brian,
You will need a longer brake line to use the X-102s on your FZ-1. I'm not sure if lowering the front 1" will help you out with the slack.
Thank you,
Scott-GenMar
QUESTION: Will this item work on a 2007 suzuki c90T
ANSWER: Hi,
The X-102 risers will not work on the C90. The C90 has 1" bars and the X-102s are for 7/8".
Thanks for the inquiry,
Scott-GenMar
QUESTION: I've been looking for a riser that would allow me to put a sporter bar on a 2002 buell blast. The turning radius is too small if I just replace the stock bar right now with the flater sporter handlebar. I was hoping using a riser would improve the turning radius. Do you think this would work?
ANSWER: Hi,
A riser would give you the extra clearance you would need. However, we currently do not offer a riser for the Buell Blast. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GEnmar
QUESTION: Will it fit a 1992 Yamaha Seca II? Nothing like it mentioned previous. Thanks Scott
ANSWER: Hi,
The X-102 risers will fit on the 92 Yamaha Seca II. No changes to the control cables are required.
Thank you,
Scott-GenMar
QUESTION: Hi, my name is oscar from Chile, i need this product to kawasaki kx 65 2003, do you have, many thanks
ANSWER: Hi,
We do have the X-102s in stock and they will fit on the 03 Kawasaki KX 65.
Thank you,
Scott-GenMar
QUESTION: will your risers work on a susuki c 90 street bike
ANSWER: The X-102 risers will not work on the C90. We have bike specific risers for the C90 part # S-130. The S-130s will raise the bars up 1 1/2" and back just over 1" due to the angle.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hi there, I assume the risers will work on a BMW R1150 Rockster. Does installation requires any rerouting of cables/wires?
thanks, Manlio
ANSWER: Hi Manlio,
Our X-102 risers will fit on the R1150. There are no changes to the control cables necessary.
Thank you,
Scott-GEnMar
QUESTION: Hello! Will the X-102 risers fit the 2006 Triumph Tiger 955i without cable changes?
ANSWER: Hi,
The X-102s will fit the tiger without any changes to the control cables.
Thank you,
Scott-GenMar
QUESTION: Will the X-102 work for an 07 FZ1 as well?
ANSWER: Hi,
The X-102 risers will fit on the 07 FZ-1 but you will have to lengthen the front brake hose.
Thanks,
Scott-GenMar
QUESTION: I understand the x-102 will fit the 07 Sv650 suzuki but can you lift the gas tank for service?
ANSWER: Hi,
You will have to remove the risers to raise the gas tank to its full height. You can access the filter but you cannot extend the tank fully without it hitting the risers.
Thanks for the inquiry,
Scott-GEnMar
QUESTION: do these risers fit a 1996 ninja 250?
ANSWER: Hi,
The X-102 risers will not fit on the 96 Ninja 250. Our K-108 risers are specifically made for the Ninja 250.
Thank you,
Scott-GenMar
QUESTION: Will these risers fit a 2003 BMW R1200C? Will I need to replace cables, etc.? Thanks
ANSWER: Hi,
We currently do not offer a riser that will work on the R1200C. Sorry we couldn't help you out.
Thank you,
Scott-GenMar
QUESTION: Have you tried this on such a motorcycle?any cables need to change, or any other issues?
ANSWER:
QUESTION: Do your X101 risers fit a 2007 Bandit 1250? If so do I need longer brake lines as previous year models?
ANSWER: Hi,
The S-121 or the X-102 risers will fit the 07 Bandit 1250 without having to change the brake line.
Thanks for the inquiry,
Scott-GenMar
QUESTION: would these risers work on a 2005 v-star 1100 custom?
ANSWER: The X-102 risers will not work on the V-Star. The X-102 risers are for 7/8" bars and the V-Star has 1" bars.
Thanks for the inquiry,
Scott-GenMar
QUESTION: do you have any risers that would fit the 06 Breva 1100. They would be similar to some of the Triumph risers. Thanks
ANSWER: Hi,
Our X-103 and X-102 risers will fit the 06 Breva 1100.
Thank you,
Scott
QUESTION: Hi are you offering free shipping to Quebec City, Canada G1P 2R9. If not how much?
Tks
ANSWER: Hi,
Shipping to Canada is $8.00 for global priority which usually takes around 5-7 days to arrive.
Thank you,
Scott-GenMar
QUESTION: I want the 1 inch up and back risers for my 2007 SV650. It has manifold front brake lines and does not appear to have enough slack for risers. How do I effect the modification?
ANSWER: The brake line has a bracket on the bottom triple-clamp. The bolt holding the bracket can be removed to get the extra slack you will need.
Thank you,
Scott-GenMar
QUESTION: I have a 2006 Suzuki DL 1000. I am interested in the X102 Handlebar Riser. What is the width of the riser. Also, the base plate for the stock riser has a slight radius to it...will the X102 Riser match that Radius? Thanks, Bob
ANSWER: Hi Bob,
The width of the X-102 risers is 21mm. The radius on the risers does match the stock radius on the DL1000.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have the 1979 kz650 i was wondering are there any other kits you have that will bring my bars up and back further than this set?
thanks again
ANSWER: The X-102 risers are the only risers we carry for the KZ650 that would bring the bars up and back.
Thank you,
Scott-Genmar
QUESTION: i have a 1979 kz650 will this work for my bike?
ANSWER: Yes, the X-102 risers will work on a 79 KZ650.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a 2005 suzuki boulevard M50, please tell me these will fit my bike. I am another one of those 5 foot nothing wives. If so which ones?
ANSWER: Hi,
We currently do not carry a riser for the M50. It is going to be tough to make a riser work on the M50 with its speedometer set-up.
Thank you,
Scott-GenMar
QUESTION: Dear Sir,
A question about the x102 universal riser (Bar) Is the listed price for one unit only?
Obviously two are required. I just want to be sure before ordering.Thank you
Regards Philip..(New Zealand)
ANSWER: Hi Philip,
The price listed is for a full set of two risers and mounting hardware.
Thank you,
Scott-GenMar
QUESTION: Looking for a product like the x-101 or x-102 for a 2006 Harley Heritage Softail-FLSTC!! Do you carry anything??
ANSWER: Hi,
We currently do not carry any risers compatible with the Harley models. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will this set fit my 1985 BMW k100rs
ANSWER: Hi,
The X-102 risers will fit the 85 BMWK100RS.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Sorry if this is redundant for the 85 Nighthawk, but i do not know if there are differences in the handlebar configuration: I have an 86 Nighthawk CB700SC......
Thanks,
Andy
ANSWER: Hi Andy,
The X-102s will fit on the 85 nighthawk CB700SC without any changes to the control cables.
Thank you,
Scott-GenMar
QUESTION: I have a 2005 Victory V92 Touring cruiser. After installing a different seat, it set me back about one inch further from the bars. Do you make setbacks appropriate for my bike and if so, are there any peculiar installation issues? Thanks.
ANSWER: Hi,
We currently do not carry a riser for the Victory models. The bolt hole spacing is different on the Victory than on the metric models. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I would just like to confirm that the X101 will fit a 2000 Bandit 1200? And what are the shipping costs to Nova Scotia Canada?
ANSWER: Hi,
The X-101 will fit the Bandit. However, you will need a longer brake hose to accommodate for the risers. We typically send our part # S-121 that comes with longer brake line for the bandit models. Shipping to Nova Scotia is $10.00.
Thank you,
Scott-GenMar
QUESTION: have a 1990 fj 1200 I would like to raise the handle bars can you
please make a suggestion on product.
Thanks
ANSWER: Hi,
Our risers for the 1990 FJ1200 are our part # Y-117.
Thank you,
Scott-GenMar
QUESTION: HELLO..WILL THE X102 FIT A 2001 KAWASAKI ZRX 1200R THANKS ...RICHIE
ANSWER: Hi Richie,
The X-102Bs will fit the 01 ZRX1200. You will only need to re-route the throttle cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I see where you said the X102 will fit the VMAX but what about cable length? every thing OK there? By the way I made a set of what I called Barbacks for my 1980 Yamaha 850 Midnight Special back in 1980 before There were any available commericialy and they looked excactly like your X102s' But I'm retired now so I guess I'll just buy a set.
ANSWER: Our X-102s will fit the VMAX without any cable changes. Also check out our part # Y-124 that is bike specific for the VMAX.
Thank you,
Scott-GenMar
QUESTION: Will the x102b fit my 2000 honda nighthawk 750 without relocating any control cables or wires?
thanks!
ANSWER: Hi,
The X-102B will fit the 2000 Honda Nighthawk 750 without any modifications to the control cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hi do you have risers for a 1996 GS500E with clip-on bars? Thanks, Matthew
ANSWER: Hi Matthew,
We do not carry any risers for clip-on type bars that are mounted below the top triple-clamps. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Hi-
Do you have any images showing the X101 or X102 installed on a 03-07 SV650 naked? Any chance you could do Priority mail to Honolulu? Aloha!
ANSWER: Check out www.genmarmfg.com under the SV650 link and there is a picture of the X-102s installed on a SV650 naked. We would be happy to ship Priority mail to Honolulu.
Thanks for the inquiry,
Scott-GenMar
QUESTION: hi i was wondering if these risers would work on 2003 zx6r
ANSWER: Hi,
The X-102 risers will not work on the ZX-6R. We currently do not offer a riser for the ZX-6R. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: wll your risers fit my suzuki gsr600
derrick
ANSWER: Hi Derrick,
We currently do not have a riser for the GSX-R600. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: 1984 BMW R100CS, actually any R100 or R90 from '80 to '84. Aslo, why do you not list exact dimensions ( hole spacing, bolt size and so on )?
ANSWER: The bolt hole spacing is 1 3/8" and the bolts are 8mm with a 1.25 thread pitch.
Thank you,
Scott-GenMar
QUESTION: i have a 2003 suzuki sv650s, which ones do i need
ANSWER: Hi,
We currently do not carry a riser for the S model. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: I have a 2000 BMW R1200C will your risers fit that bike if so which riser model.
ANSWER: We currently do not have a riser available for the R1200C. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: I see that the front bolt is there, but is there a longer bolt in the middle that goes through to attach to the rear hole of the stock clamp?
ANSWER: Hi,
The middle bolt does go all the way through. There are 4 bolts mounting the X-102s to the triple-clamps.
Thank you,
Scott-GenMar
QUESTION: Will either X101 or X102 fit my 98' R1100GS without rerouting cables? Thx...
ANSWER: Hi,
Our universal will not fit on the R1100GS. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a BMW R1200C...will either of these fit...exactly what I am looking for.
ANSWER: Hi,
Our universal risers will not fit the R1200C. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar
QUESTION: i have a 1998 triumph adventurer will the x-102 fit without any rerouting of cables or tank issues?
ANSWER: Hi,
The X-102s will fit the Adventurer without any changes to the control cables.
Thank you,
Scott-Genmar
QUESTION: Will these risers fit a 2003 Triumph Thunderbird Sport? I am at the point where I experience pain after 30 minutes. I have read I can simply replace the Sport bars for the standard bars from the Thunderbird. Your advice please.
ANSWER: Hi,
The X-102 risers will fit the 03 Thunderbird Sport without any changes to the control cables required. It will be an easier and less expensive alternative to switching the handlebars. If the risers do not work, we have a 30 day money back guarantee.
Thank you,
Scott-genmar
QUESTION: I'm looking for a riser that will raise my DL650 Vstrom bars up 2 Inches and back 1 inch. Any suggestions? thank you
ANSWER: Hi,
We currently only carry the X-102 risers for the V-Stroms. They will raise the bars up 1" and back 1 3/8". The X-102s are currently the largest riser we have for the V-Strom.
Thank you,
Scott-GenMar
QUESTION: I have a 1986 BMW R80RT. Bolt spacing is 33mm for the stock risers, what is the bolt spacing on your risers.
ANSWER: Hi,
The bolt holes on the X-102 risers are slightly elongated and will fit 33mm bolt hole spacings.
Thank you,
Scott-GenMar
QUESTION: I have brand new Moto Morini Corsaro 1200, will any of risers fit.
ANSWER: Hi,
We currently do not carry a riser that will fit the Corsaro 1200.
Thank you,
Scott-GenMar
QUESTION: I have a bonneville t-100 (2006)
with 1" dia. bars. I'm in dire need
of setbacks (1" up and 1-3/8" back).
Can your 7/8" setbacks
be modified for 1" dia.? If not
will you have a 1" version soon"
ANSWER: Hi,
The X-102 risers are not compatible with the 1" bolt hole spacing. We currently only offer the T-114 risers for the Bonneville.
Thank you,
Scott-GenMar
QUESTION: I have a 1989 K100RS BMW. I would like to raise the handlebars 3 inches and the footpegs lowered 4 inches and maybe forward. Does your company have solutions? Thanks George from Alaska.
ANSWER: Hi George,
We currently do not offer a product to lower the pegs on the K100RS and our risers would only raise the bars up 1". Sorry we couldn't help you out.
Thank you,
Scott-GenMar
QUESTION: will this work on the new 2007 DUCATI GT 1000 ? or
Which riser will work ? Thanks
ANSWER: Hi,
We haven't had a chance to try our risers on the 07 GT1000. We are having problems finding that bike in our area. You might check back in a couple weeks. Hopefully we will have some information for you then.
Thank you,
Scott-GenMar
QUESTION: For the 2006 Yamaha FZ6, will I need to change out any cables or controls?
ANSWER: The brake line gets a little tight using the X-102 risers on the FZ-6. It isn't overly tight, but some customers do chose to change it out. The other cables are fine.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Hi, Will these risers, X-102 work on my wifes Ducati monster 620. Shes 4 foot nothing and need all the help she can get. Thanks, Keith Smith
Charleston, SC
ANSWER: Hi,
The X-102s will fit on the Monsters up the 02 model. They will not fit on the 03 to current Monsters due to a change in the bolt hole spacing.
Thank you,
Scott-GenMar
QUESTION: Is there any chance these will fit a Yamaha WR450 F - this design is exactly what I'm looking for.
Keith
ANSWER: Hi keith,
The X-102 risers will fit the Yamaha WR450. You will not have to reroute or lengthen any of the control cables. A bunch of the local desert race guys have these on their bikes.
Thank you,
Scott-GenMar
QUESTION: I have a Moto Guzzi California Jackal which had normal 7/8" bars. When ordering a new one I was sent 1 1/4" bars. They couldn't provide me with new risers or 7/8" bars so I'm currently stuck.
Your universal bars look as though they would solve the problem. Can you please confirm.
Regards
Bill
ANSWER: Hi Bill,
Our universal risers will not fit the Guzzi bolt pattern. We currently do not have a riser that will work on the Jackal. Sorry we couldn't help you out.
Thank you,
Scott-GenMar
QUESTION: Hi, I have a 2003 SV650 naked. Will the X102 and X101 both fit without any cable modifications? Also do you ship to the UK (London)? Many thanks.
ANSWER: Hi,
The X-102 and X-101 risers are the same part now. The X-102s will fit on the 03 SV650 without any changes to the control cables. We do ship to the UK daily.
Thank you,
Scott-GenMar
QUESTION: Which product will fit a 1992 Yamaha Virago 1100.
Thanks
John
ANSWER: Hi John,
Our X-103 and X-102 risers will both work on the Virago.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Since you don't carry risers/higher clip-ons for the '05 SV650S, can you recommend a competing provider or manufacturer? Thanks much.
Terry
ANSWER: Hi Terry,
You should check with Helibars or Cycle Cat.
Thank you,
Scott-GenMar
QUESTION: Hi, I see x-102 risers installed on 2002 gs500. Does this app require any rerouting etc. or plug and play. Thanks, Steve
ANSWER: Hi Steve,
You will not have to re-route any of the cables but you will have to remove some zip-ties to get the slack you will need.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a 2003 Suzuki SV1000, naked version, do you have any handlebar risers for this model.
ANSWER: Our X-102 and X-103 risers will both fit on the 03 SV1000. You will not need to change or reroute any of the control cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Greetings, I am working on a 2005 FZ6 (Fazer). Will your RiserX102 work? they want up and back both. thanks bob Day, Calypso Cycle, Cottonwood Ca.
ANSWER: Hi Bob,
You can put the X-102s on the FZ6. The X-102s will use most of the slack in the front brake line and some customers prefer a longer line installed.
Thanks for the inquiry,
Scott-Genmar
QUESTION: Will the X102 fit a 2006 FX6?
ANSWER: Hi,
I'm not familiar with the FX6. What brand of bike is it?
Thank you,
Scott-Genmar
QUESTION: which part number do i order for a 2002 ZR7-S
ANSWER: Hi,
You can put the X-103 or the X-102 risers on the ZR7-S. However, the front brake line will have to be lengthened when using either model.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Do you offer this for 1 inch bars? For a 2003 Victory V92CCD or a Universal set up in 1 inch
ANSWER: Hi,
We currently do not offer the up and back riser for 1" bars. With most of the larger cruisers going with the 1" bars, we should have something in the near future.
Thanks for the inquiry,
Scott-GenMar
QUESTION:
Item no. X102
will this fit a 03 America?....
ANSWER: Hi,
Our X-102 risers will not fit the 03 Bonneville America. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: will the x102b fit a 1985 Honda Nighthawk 650?
ANSWER: Hi,
The X-102B will fit the Nighthawk 650 without any changes to the control cables.
Thank you,
Scott-Genmar
QUESTION: hi i am very interested in buying some handlebar risers for my triumph thunderbird 2002 will the x-102 risers fit my bike with out any cable or electric mods
ANSWER: Hi,
The X-102s will fit on the Thunderbird without any changes to the control cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Can you please tell me if the X102 risers will fit my GSX1400 K2? If so can I have the price including shipping to Scotland in the UK.
Yours Hopefully
Ian Graham
ANSWER: Hi Ian,
The X-102 risers will fit on the GSX1400 K2. The risers are $109.95 plus $9.00 for shipping to the UK.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Are there handle bar riser extensions for a 2001 Suzuki SV650S model? Please provide part number. Thanks, Greg
ANSWER: Hi Greg,
We currently do not carry risers for the S model. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: HI ..WILL THE X102 FIT YAMAHA VMAX..? IF SO I WILL TAKE A SET..GARY
ANSWER: Hi,
The X-102 will fit the VMAX.
Thank you,
SW
QUESTION: Will the X102 fit a 2005 Honda 919 without cable and or hose replacement? Thanks in advance.
Hank.
ANSWER: Hi Hank,
The X-102 will fit on the 919 without any modifications.
Thank you,
Scott-GenMar
QUESTION: Looking for risers for a 2005 gsxr 600.
thanks.
kevin
ANSWER: Hi Kevin,
We currently do not carry a riser for the 05 GSXR 600. Sorry we coulnd't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: This weekend I fitted the X101 riser on my Suzuki SV650. You're right...installation was easy and my riding position is much improved. Thanks for a great product!
ANSWER: We appreciate the positive feedback.
Thank you,
Scott-Genmar
QUESTION: Will the X101 fit on a 2005 Suzuki SV650 (naked) without the longer brake hose? Thanks....
ANSWER: Hi,
The X-102/X-101 risers will fit on the 05 SV650 without any changes to the control cables necessary.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have 2005 Suzuki sv650S is this product useable? Thx
ANSWER: Hi,
You will not be able to use the X-102 on the SV650S. We currently only carry risers for the naked SV650 standard. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will the X101 fit a 2004 Suzuki Bandit 1200
ANSWER: The X-101 risers will fit on the Bandit but it will require the brake line. Our S-121 risers are made specifically for the Bandits. The S-121s are silver to match the Bandit triple-clamp and come with the necessary brake hose.
Thanks for the inquiry,
Scott-Genmar
QUESTION: i have a 2004 thunderbird sport. i want to raise the bars an inch but do not want them back 1 3/8" (i think the bars may hit the tank with X102). do you have any risers that fit my bolt pattern?
ANSWER: Hi,
Our X-103 risers will raise the bar on the Thunderbird Sport up 1" and get them back only about 1/2" due to the angle of the stock risers.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Will X102 (the up&back risers) fit my 2004 SV650 Naked bike? Cable changes are necessary maybe? Thanks man!
ANSWER: Hi,
The X-102 risers will fit on the 04 SV650 without any changes to the control cables.
Thanks for the inquiry,
Scott-GenMar
QUESTION: Do you have any handlebar risers, similar to the Speed Triple riser, for the Speed Four? Thanks.
ANSWER: Hi,
We should have our new risers for the Speed Four ready for sale in about 3 weeks. You might check back with us then.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a 2000 ZX7R and I am wondering if you have any pictures of this application in place. I am still confused as to how my clamp on handle bars will fit this configuration. Please advise and thank you.
ANSWER: Hi,
We do have pictures of the risers installed on our web site at www.genmarmfg.com . Look under the universal riser heading on the top left corner of our home page.
Thanks for the inquiry,
Scott-GenMar
QUESTION: I have a Triumph 2003 Daytona 955i, I'm looking for frame sliders, and clip-on handlebar risers. Do you have anything for this bike? Thanks
ANSWER: We currently do not have anything for the Daytona 955i.
Thank You,
Bruce-Genmar
Ask your question here:
Your email (so we can send you the answer):
powered by
